Possible em28xx regression for Pinnacle Dazzle Tv Hybrid Stick 320E
Hi,
I've already wrote on the problem that I'll go to explain and that was already solved by Devin. It was solved and a call for tester was done, and all was working (em28xx DVB modeswitching change); logically I've used actual tree (updated with hg today). Now the problem: with scandvb, during a scan for channels, the adapter is able to recognize and tune only the first mux found in the list, for all the other mux the output is "tuning failed"; I can change the mux order, but always only first mux is tuned and channel recognized.
Thanks in advance for support,
Sebastian
Quoted 9 lines · On Sat, Feb 13, 2010 at 9:00 PM, SebaX75 <[email protected]> wrote:
Hi,
I've already wrote on the problem that I'll go to explain and that was already solved by Devin. It was solved and a call for tester was done, and all was working (em28xx DVB modeswitching change); logically I've used actual tree (updated with hg today).
Now the problem: with scandvb, during a scan for channels, the adapter is able to recognize and tune only the first mux found in the list, for all the other mux the output is "tuning failed"; I can change the mux order, but always only first mux is tuned and channel recognized.
I would have to fall on my sword with this one - the modeswitching changes weren't committed because of Mauro's concerns about power management (and while I think he is incorrect in this regard, I never took the time to prove it). And I failed to check in the one line change which was strobing the reset when the dvb gpio get called (which was what was causing the zl10353 driver state to get out of sync with the chip).
In other words, neither fix ever actually made it into the mainline v4l-dvb tree.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com