Skip to contentSkip to conversation

Staging: rtl8187se: fix spacing errors and commenting format in r8180_93cx6.c

PATCH In review Richard Colquhoun 3 participants 3 messages Feb 17, 2010 – Mar 23, 2010 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Staging: rtl8187se: fix spacing errors and commenting format in r8180_93cx6.c

Quoted 1 line

From 764502ee11ccd601ee7fb6bc00e2333055b9dd41 Mon Sep 17 00:00:00 2001

From: Richard Colquhoun <arfab28@valen.(none)>
Date: Wed, 17 Feb 2010 12:32:13 +0000
Subject: [PATCH] Staging: rtl8187se: fix spacing errors and commenting format in r8180_93cx6.c
This patch just fixes all of the errors highlighted by the checkpatch.pl script

---
 drivers/staging/rtl8187se/r8180_93cx6.c |   81 ++++++++++++++++---------------
 1 files changed, 41 insertions(+), 40 deletions(-)
drivers/staging/rtl8187se/r8180_93cx6.c +41 -40
index 7e4711f..51c59cb 100644
@@ -22,13 +22,13 @@
 
 void eprom_cs(struct net_device *dev, short bit)
 {
-	if(bit)
+	if (bit)
 		write_nic_byte(dev, EPROM_CMD,
 			       (1<<EPROM_CS_SHIFT) | \
-			       read_nic_byte(dev, EPROM_CMD)); //enable EPROM
+			       read_nic_byte(dev, EPROM_CMD)); #enable EPROM
 	else
 		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
-			       &~(1<<EPROM_CS_SHIFT)); //disable EPROM
+			       &~(1<<EPROM_CS_SHIFT)); #disable EPROM
 
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
@@ -38,23 +38,23 @@ void eprom_cs(struct net_device *dev, short bit)
 void eprom_ck_cycle(struct net_device *dev)
 {
 	write_nic_byte(dev, EPROM_CMD,
-		       (1<<EPROM_CK_SHIFT) | read_nic_byte(dev,EPROM_CMD));
+		       (1<<EPROM_CK_SHIFT) | read_nic_byte(dev, EPROM_CMD));
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
 	write_nic_byte(dev, EPROM_CMD,
-		       read_nic_byte(dev, EPROM_CMD) &~ (1<<EPROM_CK_SHIFT));
+		       read_nic_byte(dev, EPROM_CMD)&~(1<<EPROM_CK_SHIFT));
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
 }
 
 
-void eprom_w(struct net_device *dev,short bit)
+void eprom_w(struct net_device *dev, short bit)
 {
-	if(bit)
+	if (bit)
 		write_nic_byte(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
-			       read_nic_byte(dev,EPROM_CMD));
+			       read_nic_byte(dev, EPROM_CMD));
 	else
-		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev,EPROM_CMD)\
+		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
 			       &~(1<<EPROM_W_SHIFT));
 
 	force_pci_posting(dev);
@@ -66,11 +66,12 @@ short eprom_r(struct net_device *dev)
 {
 	short bit;
 
-	bit=(read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT) );
+	bit = (read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT));
 	udelay(EPROM_DELAY);
 
-	if(bit) return 1;
-	return 0;
+	if (bit)
+		return 1;
+		return 0;
 }
 
 
@@ -78,7 +79,7 @@ void eprom_send_bits_string(struct net_device *dev, short b[], int len)
 {
 	int i;
 
-	for(i=0; i<len; i++){
+	for (i = 0; i < len; i++) {
 		eprom_w(dev, b[i]);
 		eprom_ck_cycle(dev);
 	}
@@ -88,50 +89,50 @@ void eprom_send_bits_string(struct net_device *dev, short b[], int len)
 u32 eprom_read(struct net_device *dev, u32 addr)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
-	short read_cmd[]={1,1,0};
+	short read_cmd[] = {1, 1, 0};
 	short addr_str[8];
 	int i;
 	int addr_len;
 	u32 ret;
 
-	ret=0;
-        //enable EPROM programming
+	ret = 0;
+	#enable EPROM programming
 	write_nic_byte(dev, EPROM_CMD,
 		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
 
-	if (priv->epromtype==EPROM_93c56){
-		addr_str[7]=addr & 1;
-		addr_str[6]=addr & (1<<1);
-		addr_str[5]=addr & (1<<2);
-		addr_str[4]=addr & (1<<3);
-		addr_str[3]=addr & (1<<4);
-		addr_str[2]=addr & (1<<5);
-		addr_str[1]=addr & (1<<6);
-		addr_str[0]=addr & (1<<7);
-		addr_len=8;
-	}else{
-		addr_str[5]=addr & 1;
-		addr_str[4]=addr & (1<<1);
-		addr_str[3]=addr & (1<<2);
-		addr_str[2]=addr & (1<<3);
-		addr_str[1]=addr & (1<<4);
-		addr_str[0]=addr & (1<<5);
-		addr_len=6;
+	if (priv->epromtype == EPROM_93c56) {
+		addr_str[7] = addr & 1;
+		addr_str[6] = addr & (1<<1);
+		addr_str[5] = addr & (1<<2);
+		addr_str[4] = addr & (1<<3);
+		addr_str[3] = addr & (1<<4);
+		addr_str[2] = addr & (1<<5);
+		addr_str[1] = addr & (1<<6);
+		addr_str[0] = addr & (1<<7);
+		addr_len = 8;
+	} else{
+		addr_str[5] = addr & 1;
+		addr_str[4] = addr & (1<<1);
+		addr_str[3] = addr & (1<<2);
+		addr_str[2] = addr & (1<<3);
+		addr_str[1] = addr & (1<<4);
+		addr_str[0] = addr & (1<<5);
+		addr_len = 6;
 	}
 	eprom_cs(dev, 1);
 	eprom_ck_cycle(dev);
 	eprom_send_bits_string(dev, read_cmd, 3);
 	eprom_send_bits_string(dev, addr_str, addr_len);
 
-	//keep chip pin D to low state while reading.
-	//I'm unsure if it is necessary, but anyway shouldn't hurt
+	#keep chip pin D to low state while reading.
+	#I'm unsure if it is necessary, but anyway shouldn't hurt
 	eprom_w(dev, 0);
 
-	for(i=0;i<16;i++){
-		//eeprom needs a clk cycle between writing opcode&adr
-		//and reading data. (eeprom outs a dummy 0)
+	for (i = 0; i < 16; i++) {
+		#eeprom needs a clk cycle between writing opcode&adr
+		#and reading data. (eeprom outs a dummy 0)
 		eprom_ck_cycle(dev);
 		ret |= (eprom_r(dev)<<(15-i));
 	}
@@ -139,7 +140,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
 	eprom_cs(dev, 0);
 	eprom_ck_cycle(dev);
 
-	//disable EPROM programming
+	#disable EPROM programming
 	write_nic_byte(dev, EPROM_CMD,
 		       (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	return ret;
Signature · 1 line
1.6.3.3
#1 lore raw

drivers/staging/rtl8187se/r8180_93cx6.c void eprom_send_bits_string(struct net_device *dev, short b[], int len) · line 99

Quoted 4 lines
drivers/staging/rtl8187se/r8180_93cx6.c +2 -2
-	ret=0;
-        //enable EPROM programming
+	ret = 0;
+	#enable EPROM programming

This is not valid C. Please build the code before sending in patches.

Also, you might want to brush up on your C programming skills :)

thanks,

greg k-h

Reviewed-by on v1 1/1
#2 lore raw
In reply to Richard Colquhoun
Quoted 175 lines · Richard Colquhoun

From 764502ee11ccd601ee7fb6bc00e2333055b9dd41 Mon Sep 17 00:00:00 2001
From: Richard Colquhoun <arfab28@valen.(none)>
Date: Wed, 17 Feb 2010 12:32:13 +0000
Subject: [PATCH] Staging: rtl8187se: fix spacing errors and commenting format in r8180_93cx6.c
This patch just fixes all of the errors highlighted by the checkpatch.pl script

---
 drivers/staging/rtl8187se/r8180_93cx6.c |   81 ++++++++++++++++---------------
 1 files changed, 41 insertions(+), 40 deletions(-)
drivers/staging/rtl8187se/r8180_93cx6.c +41 -40
index 7e4711f..51c59cb 100644
@@ -22,13 +22,13 @@
 
 void eprom_cs(struct net_device *dev, short bit)
 {
-	if(bit)
+	if (bit)
 		write_nic_byte(dev, EPROM_CMD,
 			       (1<<EPROM_CS_SHIFT) | \
-			       read_nic_byte(dev, EPROM_CMD)); //enable EPROM
+			       read_nic_byte(dev, EPROM_CMD)); #enable EPROM
 	else
 		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
-			       &~(1<<EPROM_CS_SHIFT)); //disable EPROM
+			       &~(1<<EPROM_CS_SHIFT)); #disable EPROM
 
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
@@ -38,23 +38,23 @@ void eprom_cs(struct net_device *dev, short bit)
 void eprom_ck_cycle(struct net_device *dev)
 {
 	write_nic_byte(dev, EPROM_CMD,
-		       (1<<EPROM_CK_SHIFT) | read_nic_byte(dev,EPROM_CMD));
+		       (1<<EPROM_CK_SHIFT) | read_nic_byte(dev, EPROM_CMD));
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
 	write_nic_byte(dev, EPROM_CMD,
-		       read_nic_byte(dev, EPROM_CMD) &~ (1<<EPROM_CK_SHIFT));
+		       read_nic_byte(dev, EPROM_CMD)&~(1<<EPROM_CK_SHIFT));
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
 }
 
 
-void eprom_w(struct net_device *dev,short bit)
+void eprom_w(struct net_device *dev, short bit)
 {
-	if(bit)
+	if (bit)
 		write_nic_byte(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
-			       read_nic_byte(dev,EPROM_CMD));
+			       read_nic_byte(dev, EPROM_CMD));
 	else
-		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev,EPROM_CMD)\
+		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
 			       &~(1<<EPROM_W_SHIFT));
 
 	force_pci_posting(dev);
@@ -66,11 +66,12 @@ short eprom_r(struct net_device *dev)
 {
 	short bit;
 
-	bit=(read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT) );
+	bit = (read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT));
 	udelay(EPROM_DELAY);
 
-	if(bit) return 1;
-	return 0;
+	if (bit)
+		return 1;
+		return 0;
 }
 
 
@@ -78,7 +79,7 @@ void eprom_send_bits_string(struct net_device *dev, short b[], int len)
 {
 	int i;
 
-	for(i=0; i<len; i++){
+	for (i = 0; i < len; i++) {
 		eprom_w(dev, b[i]);
 		eprom_ck_cycle(dev);
 	}
@@ -88,50 +89,50 @@ void eprom_send_bits_string(struct net_device *dev, short b[], int len)
 u32 eprom_read(struct net_device *dev, u32 addr)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
-	short read_cmd[]={1,1,0};
+	short read_cmd[] = {1, 1, 0};
 	short addr_str[8];
 	int i;
 	int addr_len;
 	u32 ret;
 
-	ret=0;
-        //enable EPROM programming
+	ret = 0;
+	#enable EPROM programming
 	write_nic_byte(dev, EPROM_CMD,
 		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	force_pci_posting(dev);
 	udelay(EPROM_DELAY);
 
-	if (priv->epromtype==EPROM_93c56){
-		addr_str[7]=addr & 1;
-		addr_str[6]=addr & (1<<1);
-		addr_str[5]=addr & (1<<2);
-		addr_str[4]=addr & (1<<3);
-		addr_str[3]=addr & (1<<4);
-		addr_str[2]=addr & (1<<5);
-		addr_str[1]=addr & (1<<6);
-		addr_str[0]=addr & (1<<7);
-		addr_len=8;
-	}else{
-		addr_str[5]=addr & 1;
-		addr_str[4]=addr & (1<<1);
-		addr_str[3]=addr & (1<<2);
-		addr_str[2]=addr & (1<<3);
-		addr_str[1]=addr & (1<<4);
-		addr_str[0]=addr & (1<<5);
-		addr_len=6;
+	if (priv->epromtype == EPROM_93c56) {
+		addr_str[7] = addr & 1;
+		addr_str[6] = addr & (1<<1);
+		addr_str[5] = addr & (1<<2);
+		addr_str[4] = addr & (1<<3);
+		addr_str[3] = addr & (1<<4);
+		addr_str[2] = addr & (1<<5);
+		addr_str[1] = addr & (1<<6);
+		addr_str[0] = addr & (1<<7);
+		addr_len = 8;
+	} else{
+		addr_str[5] = addr & 1;
+		addr_str[4] = addr & (1<<1);
+		addr_str[3] = addr & (1<<2);
+		addr_str[2] = addr & (1<<3);
+		addr_str[1] = addr & (1<<4);
+		addr_str[0] = addr & (1<<5);
+		addr_len = 6;
 	}
 	eprom_cs(dev, 1);
 	eprom_ck_cycle(dev);
 	eprom_send_bits_string(dev, read_cmd, 3);
 	eprom_send_bits_string(dev, addr_str, addr_len);
 
-	//keep chip pin D to low state while reading.
-	//I'm unsure if it is necessary, but anyway shouldn't hurt
+	#keep chip pin D to low state while reading.
+	#I'm unsure if it is necessary, but anyway shouldn't hurt
 	eprom_w(dev, 0);
 
-	for(i=0;i<16;i++){
-		//eeprom needs a clk cycle between writing opcode&adr
-		//and reading data. (eeprom outs a dummy 0)
+	for (i = 0; i < 16; i++) {
+		#eeprom needs a clk cycle between writing opcode&adr
+		#and reading data. (eeprom outs a dummy 0)
 		eprom_ck_cycle(dev);
 		ret |= (eprom_r(dev)<<(15-i));
 	}
@@ -139,7 +140,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
 	eprom_cs(dev, 0);
 	eprom_ck_cycle(dev);
 
-	//disable EPROM programming
+	#disable EPROM programming
 	write_nic_byte(dev, EPROM_CMD,
 		       (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
 	return ret;
Signature · 1 line
1.6.3.3

Looks good besides just one part and I guess that's just me may be: In some cases where you put a # put a space between the # and the comment. Thanks.

Signature · 4 lines
Regards,
Vikram Dhillon

There is poetry and there is beauty in real sympathy; but there is more — there is action. The noblest and most powerful form of sympathy is not merely the responsive tear, the echoed sigh, the answering look; it is the embodiment of the sentiment in actual help.