oxygen: clean up. make precedence explicit
Quoted 3 lines
This doesn't change anything, but I think it makes the code clearer. It silences a smatch warning:
sound/pci/oxygen/oxygen_mixer.c+91dac_mute_put(7)warn: add some parenthesis here?
That message doesn't say why some parentheses should be added. And it's a question; how do I give it the answer "no"? :-)
Review
Quoted 2 lines
(quoted diff) +1
-1- changed = !value->value.integer.value[0] != chip->dac_mute; + changed = (!value->value.integer.value[0]) != chip->dac_mute;
This doesn't look any clearer to me; I don't think that the unary negation operator could be thought to have lower precedence than "!=".
Why does smatch warn about this combination? Do such errors actually happen?
Regards,
Clemens
Quoted 4 lines · Clemens Ladisch
Quoted 3 lines
This doesn't change anything, but I think it makes the code clearer. It silences a smatch warning:
sound/pci/oxygen/oxygen_mixer.c+91dac_mute_put(7)warn: add some parenthesis here?
Quoted 9 lines
That message doesn't say why some parentheses should be added. And it's a question; how do I give it the answer "no"? :-)
Review
Quoted 2 lines
(quoted diff) +1
-1- changed = !value->value.integer.value[0] != chip->dac_mute; + changed = (!value->value.integer.value[0]) != chip->dac_mute;This doesn't look any clearer to me; I don't think that the unary negation operator could be thought to have lower precedence than "!=".
Well, it's hard to argue that it's more ambiguous. :P
Quoted 3 lines
Why does smatch warn about this combination? Do such errors actually happen?
Yep. I have made some myself when writing smatch.
For example here are some related bugs in the current kernel.
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
721 if (!ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY &&
722 ext->alg != IW_ENCODE_ALG_WEP)
723 if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA)
724 return -EINVAL;
if (!j->dsp.low != 0x20) {drivers/telephony/ixj.c
6834 if (!j->dsp.low != 0x20) {
Mostly the real bugs have been fixed now. Roel Kluin fixed quite a few of these before and I've fixed a couple.
regards,
dan carpenter
Quoted 7 lines
Regards,
Clemens
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 8 lines · Dan Carpenter
Quoted 7 lines · Clemens Ladisch
Quoted 3 lines
This doesn't change anything, but I think it makes the code clearer. It silences a smatch warning:
sound/pci/oxygen/oxygen_mixer.c+91dac_mute_put(7)warn: add some parenthesis here?That message doesn't say why some parentheses should be added. And it's a question; how do I give it the answer "no"? :-)
Quoted 7 lines
Quoted 5 lines
Review
Quoted 2 lines
(quoted diff) +1
-1- changed = !value->value.integer.value[0] != chip->dac_mute; + changed = (!value->value.integer.value[0]) != chip->dac_mute;This doesn't look any clearer to me; I don't think that the unary negation operator could be thought to have lower precedence than "!=".
Well, it's hard to argue that it's more ambiguous. :P
But it doesn't make the code clearer - unless you are a C novice. Unary operators generally bind stronger than others - be it "+", "-", "!", "~", "*".
I would expect kernel programmers to know that (and I don't assume in-depth knowledge of operator precedence rules).
Quoted 9 lines
Quoted 2 lines
Why does smatch warn about this combination? Do such errors actually happen:
Yep. I have made some myself when writing smatch.
For example here are some related bugs in the current kernel.
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
721 if (!ext->ext_flags &IW_ENCODE_EXT_GROUP_KEY&&
Well, I see potential bugs here and the if() should have been
a) if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) &&
b) if (!ext->ext_flags && IW_ENCODE_EXT_GROUP_KEY &&
So you one has to look at the driver for the correct fix (and perhaps both of above are wrong).
And I don't see what parenthesis around a logical negations can help with the above error example.
Bernd
Signature · 2 lines
Bernd Petrovitsch Email : [email protected] LUGA : http://www.luga.at
Quoted 25 lines · Bernd Petrovitsch
Quoted 8 lines · Dan Carpenter
Quoted 7 lines · Clemens Ladisch
Quoted 3 lines
This doesn't change anything, but I think it makes the code clearer. It silences a smatch warning:
sound/pci/oxygen/oxygen_mixer.c+91dac_mute_put(7)warn: add some parenthesis here?That message doesn't say why some parentheses should be added. And it's a question; how do I give it the answer "no"? :-)
Quoted 7 lines
Quoted 5 lines
Review
Quoted 2 lines
(quoted diff) +1
-1- changed = !value->value.integer.value[0] != chip->dac_mute; + changed = (!value->value.integer.value[0]) != chip->dac_mute;This doesn't look any clearer to me; I don't think that the unary negation operator could be thought to have lower precedence than "!=".
Well, it's hard to argue that it's more ambiguous. :P
But it doesn't make the code clearer - unless you are a C novice. Unary operators generally bind stronger than others - be it "+", "-", "!", "~", "*".
I would expect kernel programmers to know that (and I don't assume in-depth knowledge of operator precedence rules).Quoted 3 lines
Quoted 2 lines
Why does smatch warn about this combination? Do such errors actually happen:
Quoted 8 lines
Quoted 6 lines
Yep. I have made some myself when writing smatch.
For example here are some related bugs in the current kernel.
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
721 if (!ext->ext_flags &IW_ENCODE_EXT_GROUP_KEY&&Well, I see potential bugs here and the
if()should have been
a) if (!(ext->ext_flags &IW_ENCODE_EXT_GROUP_KEY) &&
Yep. This is clearly what the code should say.
The problem in the original code is that IW_ENCODE_EXT_GROUP_KEY is not equal to either 1 or to 0. (So that means the condition in the original code is always false).
Quoted 7 lines
b) if (!ext->ext_flags &&
IW_ENCODE_EXT_GROUP_KEY&&
So you one has to look at the driver for the correct fix (and perhaps both of above are wrong).And I don't see what parenthesis around a logical negations can help with the above error example.
Basically often when people write:
if (!foo = bar) { ...What they mean is:
if (!(foo = bar)) { ...But if they really do mean the original code they could just write this so it's clear to everyone:
if ((!foo) = bar) { ...To me it's like "=" vs "=". Of course, every programmer knows the what the difference is but it helps to have gcc warn about adding the extra parenthesis. Maybe I suck, but it definitely has helped me in then past.
I don't have strong feelings about this btw. The original code in oxygyn_mixer works fine. I just was making some changes to smatch and that was a new warning today. There is no method to my madness.
regards,
dan carpenter
Quoted 4 lines
Bernd
Signature · 2 lines
Bernd Petrovitsch Email : [email protected] LUGA : http://www.luga.at
Quoted 1 line · Dan Carpenter
On Fri, Feb 19, 2010 at 11:33:30AM +0100, Bernd Petrovitsch wrote:
[...]
Quoted 5 lines
Basically often when people write:
if (!foo = bar) { ...What they mean is:
if (!(foo = bar)) { ...
Ugh. The IMHO better way is
if (foo != bar) { ...Or do we need
#define unless(cond) if (!(cond))
(as in perl)?
Quoted 3 lines
But if they really do mean the original code they could just write this so it's clear to everyone:
if ((!foo) = bar) { ...
Well, since we have a boolean/0-or-1 on the left side, there actually shouldn't be too much cases to compare in that way to another value.
Quoted 4 lines
To me it's like "=" vs "=". Of course, every programmer knows the what the difference is but it helps to have gcc warn about adding the extra parenthesis. Maybe I suck, but it definitely has helped me in then past.
At most your coding style sucks. We have all our syntax quirks .... IMHO it is extremely uncommon style (which adds to "doesn't buy that much" for me).
Quoted 3 lines
I don't have strong feelings about this btw. The original code in
oxygyn_mixerworks fine. I just was making some changes to smatch and that was a new warning today. There is no method to my madness.
If there is method to madness, would it actually be madness? ;-)
Bernd
Signature · 2 lines
Bernd Petrovitsch Email : [email protected] LUGA : http://www.luga.at
Quoted 32 lines · Dan Carpenter
Quoted 31 lines · Bernd Petrovitsch
Quoted 8 lines · Dan Carpenter
Quoted 7 lines · Clemens Ladisch
Quoted 3 lines
This doesn't change anything, but I think it makes the code clearer. It silences a smatch warning:
sound/pci/oxygen/oxygen_mixer.c+91dac_mute_put(7)warn: add some parenthesis here?That message doesn't say why some parentheses should be added. And it's a question; how do I give it the answer "no"? :-)
Quoted 7 lines
Quoted 5 lines
Review
Quoted 2 lines
(quoted diff) +1
-1- changed = !value->value.integer.value[0] != chip->dac_mute; + changed = (!value->value.integer.value[0]) != chip->dac_mute;This doesn't look any clearer to me; I don't think that the unary negation operator could be thought to have lower precedence than "!=".
Well, it's hard to argue that it's more ambiguous. :P
But it doesn't make the code clearer - unless you are a C novice. Unary operators generally bind stronger than others - be it "+", "-", "!", "~", "*".
I would expect kernel programmers to know that (and I don't assume in-depth knowledge of operator precedence rules).Quoted 9 lines
Quoted 2 lines
Why does smatch warn about this combination? Do such errors actually happen:
Yep. I have made some myself when writing smatch.
For example here are some related bugs in the current kernel.
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
721 if (!ext->ext_flags &IW_ENCODE_EXT_GROUP_KEY&&
Quoted 9 lines
Quoted 2 lines
Well, I see potential bugs here and the
if()should have been
a) if (!(ext->ext_flags &IW_ENCODE_EXT_GROUP_KEY) &&Yep. This is clearly what the code should say.
The problem in the original code is that
IW_ENCODE_EXT_GROUP_KEYis not equal to either 1 or to 0. (So that means the condition in the original code is always false).
Except the last _bit_ of IW_ENCODE_EXT_GROUP_KEY _is_ equal to one or zero and I am an idiot.
But still, the original code here is wrong and your example code is correct.
regards,
dan carpenter
Quoted 7 lines · Bernd Petrovitsch
Quoted 6 lines · Dan Carpenter
On Fri, Feb 19, 2010 at 11:33:30AM +0100, Bernd Petrovitsch wrote:
Basically often when people write:if (!foo = bar) { ...What they mean is:
if (!(foo = bar)) { ...
But there are also cases where they mean what they've written.
Quoted 2 lines
Ugh. The IMHO better way is
if (foo != bar) { ...
In my case, the driver compares an "enabled" variable against a "disabled" one; negating the comparison operator would obfuscate the logic.
Quoted 3 lines
Quoted 3 lines
But if they really do mean the original code they could just write this so it's clear to everyone:
if ((!foo) = bar) { ...
This is unnatural (especially in a simple example like this) because the parens haven't been needed at all before smatch.
!foo=bar is always identical to !(foo=bar) for boolean values; to avoid false positives, you could output the warning only when the code is trying to manipulate non-boolean values. IMO the message would be justified if it said "using suspicious boolean operations on non-boolean types". (In fact, my driver uses types long and u8 in this expression, so I will clean it up.)
Regards,
Clemens
Quoted 26 lines · Clemens Ladisch
Quoted 7 lines · Bernd Petrovitsch
Quoted 6 lines · Dan Carpenter
On Fri, Feb 19, 2010 at 11:33:30AM +0100, Bernd Petrovitsch wrote:
Basically often when people write:if (!foo = bar) { ...What they mean is:
if (!(foo = bar)) { ...But there are also cases where they mean what they've written.
Quoted 2 lines
Ugh. The IMHO better way is
if (foo != bar) { ...In my case, the driver compares an "enabled" variable against a "disabled" one; negating the comparison operator would obfuscate the logic.
Quoted 3 lines
Quoted 3 lines
But if they really do mean the original code they could just write this so it's clear to everyone:
if ((!foo) = bar) { ...This is unnatural (especially in a simple example like this) because the parens haven't been needed at all before smatch.
Quoted 7 lines
!foo=bar is always identical to !(foo=bar) for boolean values; to avoid false positives, you could output the warning only when the code is trying to manipulate non-boolean values. IMO the message would be justified if it said "using suspicious boolean operations on non-boolean types". (In fact, my driver uses types long and u8 in this expression, so I will clean it up.)
Yup. The check already takes the type into account. Making chip->dac_mute type bool would silence the message.
regards,
dan carpenter
Quoted 3 lines
Regards,
Clemens