af901x: NXP TDA18218
This is a forward of the original email from Nikola Pajkovsky. Just for the records, so it is on the list.
This solves the problem of the tuner id:179 not supported error, when loading the AF9015 driver.
Thank you, Nikola!
Regards,
Bert Massop
---------- Forwarded message ----------
From: Nikola Pajkovsky <[email protected]>
Date: Wed, Feb 24, 2010 at 11:54
Subject: Re: af901x: NXP TDA18218
To: Antti Palosaari <[email protected]>
Cc: [email protected], [email protected], [email protected], [email protected]
Hello,
here is my solution, I can watch Vancouver right now :). I don't look at the patch if there is some mistake(no time watch Vancouver), but I will when I will have some free time.
Attached patch apply against this souce (hg clone
http://linuxtv.org/hg/~anttip/af9015/).
Firmware:
wget http://jusst.de/manu/fw/AFA/dvb-usb-af9015.fw_a-link
sudo mv dvb-usb-af9015.fw_a-link /lib/firmware/dvb-usb-af9015.fw
Have a nice day ;)
Quoted 16 lines · Antti Palosaari
Hello,
I just got info from one user about this driver, looks like Terratec have driver.
http://forum.ubuntuusers.de/topic/probleme-beim-installieren-terratec-cinergy-t/3/?highlight=terratec+cinergy+t+stickAntti
Quoted 7 lines · Nikola Pajkovsky
Hello,
is any chance that will be support for TDA182118?
Regards,
--
Nikola
linux/drivers/media/common/tuners/Kconfig +7 -0
@@ -179,4 +179,11 @@ help A driver for the silicon tuner MAX2165 from Maxim. +config MEDIA_TUNER_TDA18218 + tristate "NXP TDA18218 silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if MEDIA_TUNER_CUSTOMISE + help + A driver for the silicon tuner TDA18218 from NXP. + endif # MEDIA_TUNER_CUSTOMISE
linux/drivers/media/common/tuners/Makefile +1 -0
@@ -24,6 +24,7 @@ obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o +obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
linux/drivers/media/dvb/dvb-usb/af9015.c +173 -197
499 lines not on this page · raw message
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +1 -0
@@ -129,6 +129,7 @@#define USB_PID_KWORLD_VSTREAM_WARM 0x17df#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 +#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097#define USB_PID_TWINHAN_VP7041_COLD 0x3201#define USB_PID_TWINHAN_VP7041_WARM 0x3202#define USB_PID_TWINHAN_VP7020_COLD 0x3203
linux/drivers/media/dvb/frontends/af9013.c +15 -0
@@ -488,6 +488,20 @@break ; } } +else if (state->config.tuner ==AF9013_TUNER_TDA18218 ) { +switch (bw) { +case BANDWIDTH_6_MHZ : + if_sample_freq =3000000 ;/* 3 MHz */ +break ; +case BANDWIDTH_7_MHZ : + if_sample_freq =3500000 ;/* 3.5 MHz */ +break ; +case BANDWIDTH_8_MHZ : +default : + if_sample_freq =4000000 ;/* 4 MHz */ +break ; + } + }while (if_sample_freq > (adc_freq /2 )) if_sample_freq = if_sample_freq - adc_freq;
@@ -1390,6 +1404,7 @@ init = tuner_init_mt2060_2;break ;case AF9013_TUNER_TDA18271 : +case AF9013_TUNER_TDA18218 : len =ARRAY_SIZE (tuner_init_tda18271); init = tuner_init_tda18271;break ;
linux/drivers/media/dvb/frontends/af9013.h +1 -1
@@ -44,7 +44,7 @@AF9013_TUNER_MT2060_2 =147 ,/* Microtune */ AF9013_TUNER_TDA18271 =156 ,/* NXP */ AF9013_TUNER_QT1010A =162 ,/* Quantek */ - AF9013_TUNER_TDA18218 = 179, /* NXP */ + AF9013_TUNER_TDA18218 = 179, /* NXP */ };/* AF9013/5 GPIOs (mostly guessed)
linux/drivers/media/dvb/frontends/af9013_priv.h +3 -2
@@ -789,8 +789,9 @@ { 0x9bd9, 0, 8, 0x08 }, }; -/* NXP TDA18271 tuner init -AF9013_TUNER_TDA18271 = 156 */ +/* NXP TDA18271 & TDA18218 tuner init +AF9013_TUNER_TDA18271 = 156 +AF9013_TUNER_TDA18218 = 179 */ static struct regdesc tuner_init_tda18271[] = { {0x9bd5 ,0 ,8 ,0x01 }, { 0x9bd6, 0, 8, 0x04 },
Using the previous patch, the compiler will complain about a missing file (tda18218.h). Please use this updated version of the patch, also made by Nikola.
Have fun with it, it's working fine here!
Regards, Bert
Quoted 48 lines · Bert Massop
This is a forward of the original email from Nikola Pajkovsky. Just for the records, so it is on the list.
This solves the problem of the tuner id:179 not supported error, when loading the AF9015 driver.
Thank you, Nikola!
Regards,
Bert Massop---------- Forwarded message ----------
From: Nikola Pajkovsky <[email protected]>
Date: Wed, Feb 24, 2010 at 11:54
Subject: Re: af901x: NXP TDA18218
To: Antti Palosaari <[email protected]>
Cc: [email protected], [email protected], [email protected], [email protected]Hello,
here is my solution, I can watch Vancouver right now :). I don't look at the patch if there is some mistake(no time watch Vancouver), but I will when I will have some free time.
Attached patch apply against this souce (hg clone
http://linuxtv.org/hg/~anttip/af9015/).Firmware:
wget http://jusst.de/manu/fw/AFA/dvb-usb-af9015.fw_a-link
sudo mv dvb-usb-af9015.fw_a-link/lib/firmware/dvb-usb-af9015.fwHave a nice day ;)
Quoted 13 lines · Antti Palosaari
Hello,
I just got info from one user about this driver, looks like Terratec have driver.
http://forum.ubuntuusers.de/topic/probleme-beim-installieren-terratec-cinergy-t/3/?highlight=terratec+cinergy+t+stickAntti
Quoted 5 lines · Nikola Pajkovsky
Hello,
is any chance that will be support for TDA182118?
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
Regards,
--
Nikola
linux/drivers/media/common/tuners/Kconfig +7 -0
@@ -179,4 +179,11 @@ help A driver for the silicon tuner MAX2165 from Maxim. +config MEDIA_TUNER_TDA18218 + tristate "NXP TDA18218 silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if MEDIA_TUNER_CUSTOMISE + help + A driver for the silicon tuner TDA18218 from NXP. + endif # MEDIA_TUNER_CUSTOMISE
linux/drivers/media/common/tuners/Makefile +1 -0
@@ -24,6 +24,7 @@ obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o +obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
linux/drivers/media/common/tuners/tda18218.c new file +471 -0
471 lines not on this page · raw message
linux/drivers/media/common/tuners/tda18218.h new file +44 -0
45 lines not on this page · raw message
linux/drivers/media/common/tuners/tda18218_priv.h new file +36 -0
@@ -0,0 +1,36 @@ +/* +* Driver for NXP TDA18218 silicon tuner +* +* Copyright (C) 2010 Lauris Ding <[email protected]> +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef TDA18218_PRIV_H +#define TDA18218_PRIV_H + +#define TDA18218_STEP 1000/* 1 kHz */ +#define TDA18218_MIN_FREQ 174000000/* 174 MHz */ +#define TDA18218_MAX_FREQ 864000000/* 864 MHz */ + +struct tda18218_priv { +u8 tda18218_regs[0x3b ]; +struct tda18218_config *cfg; +struct i2c_adapter *i2c; + +u32 frequency; +u32 bandwidth; +}; + +#endif
linux/drivers/media/dvb/dvb-usb/af9015.c +173 -197
499 lines not on this page · raw message
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +1 -0
@@ -129,6 +129,7 @@#define USB_PID_KWORLD_VSTREAM_WARM 0x17df#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 +#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097#define USB_PID_TWINHAN_VP7041_COLD 0x3201#define USB_PID_TWINHAN_VP7041_WARM 0x3202#define USB_PID_TWINHAN_VP7020_COLD 0x3203
linux/drivers/media/dvb/frontends/af9013.c +15 -0
@@ -488,6 +488,20 @@break ; } } +else if (state->config.tuner ==AF9013_TUNER_TDA18218 ) { +switch (bw) { +case BANDWIDTH_6_MHZ : + if_sample_freq =3000000 ;/* 3 MHz */ +break ; +case BANDWIDTH_7_MHZ : + if_sample_freq =3500000 ;/* 3.5 MHz */ +break ; +case BANDWIDTH_8_MHZ : +default : + if_sample_freq =4000000 ;/* 4 MHz */ +break ; + } + }while (if_sample_freq > (adc_freq /2 )) if_sample_freq = if_sample_freq - adc_freq;
@@ -1390,6 +1404,7 @@ init = tuner_init_mt2060_2;break ;case AF9013_TUNER_TDA18271 : +case AF9013_TUNER_TDA18218 : len =ARRAY_SIZE (tuner_init_tda18271); init = tuner_init_tda18271;break ;
linux/drivers/media/dvb/frontends/af9013.h +1 -1
@@ -44,7 +44,7 @@AF9013_TUNER_MT2060_2 =147 ,/* Microtune */ AF9013_TUNER_TDA18271 =156 ,/* NXP */ AF9013_TUNER_QT1010A =162 ,/* Quantek */ - AF9013_TUNER_TDA18218 = 179, /* NXP */ + AF9013_TUNER_TDA18218 = 179, /* NXP */ };/* AF9013/5 GPIOs (mostly guessed)
linux/drivers/media/dvb/frontends/af9013_priv.h +3 -2
@@ -789,8 +789,9 @@ { 0x9bd9, 0, 8, 0x08 }, }; -/* NXP TDA18271 tuner init -AF9013_TUNER_TDA18271 = 156 */ +/* NXP TDA18271 & TDA18218 tuner init +AF9013_TUNER_TDA18271 = 156 +AF9013_TUNER_TDA18218 = 179 */ static struct regdesc tuner_init_tda18271[] = { {0x9bd5 ,0 ,8 ,0x01 }, { 0x9bd6, 0, 8, 0x04 },