Skip to contentSkip to conversation

linux-firmware-nonfree: Add prism54 softmac firmware

DISCUSSION Luis R. Rodriguez 2 participants 2 messages Feb 24, 2010 3 messages not in the archive

lore
Share & tools
lore
#3 lore raw
In reply to a message not in the archive
Quoted 19 lines · Chase Douglas
Quoted 18 lines · Luis R. Rodriguez
Quoted 9 lines · Chase Douglas

I have uploaded a new version of the linux-firmware-nonfree package to:

http://kernel.ubuntu.com/~cndougla/linux-firmware-nonfree/

The new package includes the firmware for prism54 softmac cards. The firmware was removed from linux-firmware due to it missing a proper license statement. I did not copy over the old prism54 (non-softmac) firmware because it has been superseded by the softmac firmware and is no longer useful in the Lucid kernel version.

Hey is PRISM54 no longer compiled in a module any more? I had set it for removal on the feature removal schedule but  I wanted to give you the heads up we've received a few reports of users unable to use prism54 over p54pci. It was theorized this would happen but we didn't have any confirmation, which is why we just didn't remove it.

Quoted 4 lines
Quoted 1 line

How would you guys deal with having both enabled.

Thanks for looking into this. I was going off of [1], which stated that the debian kernel does not include the prism54 module anymore.

Fun, passing this as a memo to lkml/Debian -- p54pci doesn't seem to work well for *all* Prism54 FullMAC cards. They technically are the same and the SoftMAC functionality was possible through a smaller firmware. But it seems some cards have issues still with p54pci so I would still enable prism54 as a module but not sure what to recommend about dealing with two modules on the system for the same device.

Quoted 4 lines

I checked
the lucid kernel and we do have prism54 built as a module still. So, are we going to leave the prism54 module in, in which case we need to restore the prism54 firmware?

Yes I'd restore the prism54 firmware until the coast is clear with p54pci for all. Its not the case so far as per reports.

Quoted 3 lines

Or are we going to remove it, in which
case the firmware package I uploaded was fine? I'm assuming at this point we'll be leaving it in though.

I'd say keep it for now.

Quoted 3 lines

Andy, do you have any thoughts here?

[1] http://wiki.debian.org/prism54

Luis

#4 lore raw
Quoted 5 lines
Quoted 4 lines

I checked
the lucid kernel and we do have prism54 built as a module still. So, are we going to leave the prism54 module in, in which case we need to restore the prism54 firmware?

Quoted 8 lines

Yes I'd restore the prism54 firmware until the coast is clear with p54pci for all. Its not the case so far as per reports.

Quoted 3 lines

Or are we going to remove it, in which
case the firmware package I uploaded was fine? I'm assuming at this point we'll be leaving it in though.

I'd say keep it for now.

We've decided to keep things as is from Karmic to Lucid in an effort to not screw things up for people who already have their wireless working. This means we'll be shipping both prism54 and p54* drivers.

I have uploaded a new linux-firmware-nonfree package that contains all the prism54 firmware for all the drivers:

http://kernel.ubuntu.com/~cndougla/linux-firmware-nonfree/

Thanks,
Chase