patch Staging-comedi-fix-coding-style-issues.patch
I've fixed most of the issues found by checkpatch.pl in 'linux-2.6/drivers/staging/comedi/drivers/ni_daq_dio24.c' and attached the patch. I forgot to put the driver name in the main description and didn't know if I could
change the name of the patch without messing it up.
I've tried setting Thunderbird to not mangle text but in case it does, I have attached the patch as well.
I did some research and had a go at fixing the warning
'WARNING: printk() should include KERN_ facility level'
by adding KERN_INFO in front of the quoted text. Please let me know if that is the right thing to do and if not, what I should do instead.
Cheers,
Stewart
Quoted 1 line
From
ce043603489db7592ff7527ae97630d7c6100296Mon Sep 17 00:00:00 2001
From: Stewart Robertson <str@minty7.(none)>
Date: Sat, 27 Feb 2010 10:03:27 +0000
Subject: [PATCH] Staging: comedi: fix coding style issues This is a patch to the ni_daq_dio24.c file that fixes line over 80 characters and KERN_INFO issues found by checkpatch.pl
---drivers/staging/comedi/drivers/ni_daq_dio24.c | 67 +++++++++++++-----------
1 files changed, 36 insertions(+), 31 deletions(-)
drivers/staging/comedi/drivers/ni_daq_dio24.c +2 -2
@@ -3,8 +3,8 @@ Driver for National Instruments PCMCIA DAQ-Card DIO-24 Copyright (C) 2002 Daniel Vecino Castel <[email protected]> - PCMCIA crap at end of file is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13 - from the pcmcia package. + PCMCIA crap at end of file is adapted from + dummy_cs.c 1.31 2001/08/24 12:13:13 from the pcmcia package. The initial developer of the pcmcia dummy_cs.c code is David A. Hinds <[email protected]>. Portions created by David A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
@@ -37,7 +37,8 @@ This is just a wrapper around the 8255.o driver to properly handle
the PCMCIA interface.
*/
- /* #define LABPC_DEBUG *//* enable debugging messages */
+/* #define LABPC_DEBUG */
+/* enable debugging messages */
#undef LABPC_DEBUG
#include <linux/interrupt.h>
@@ -55,7 +56,7 @@ the PCMCIA interface.
static struct pcmcia_device *pcmcia_cur_dev = NULL;
-#define DIO24_SIZE 4 /* size of io region used by board */
+#define DIO24_SIZE 4 /* size of io region used by board */
static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it); static int dio24_detach(struct comedi_device *dev);
@@ -64,10 +65,13 @@ enum dio24_bustype { pcmcia_bustype };
struct dio24_board_struct {
const char *name;- int device_id; /* device id for pcmcia board */
- enum dio24_bustype bustype; /* PCMCIA */
- int have_dio; /* have 8255 chip */
- /* function pointers so we can use inb/outb or readb/writeb as appropriate */
+ int device_id; /* device id for pcmcia board */
+ enum dio24_bustype bustype; /* PCMCIA */
+ int have_dio; /* have 8255 chip */
+ /*
+ * function pointers so we can use inb/outb or
+ * readb/writeb as appropriate
+ */
unsigned int (*read_byte) (unsigned int address);
void (*write_byte) (unsigned int byte, unsigned int address);
};
@@ -75,16 +79,18 @@ struct dio24_board_struct {
static const struct dio24_board_struct dio24_boards[] = {
{
.name = "daqcard-dio24",- .device_id = 0x475c, /* 0x10b is manufacturer id, 0x475c is device id */
- .bustype = pcmcia_bustype,
- .have_dio = 1,
- },
+ /* 0x10b is manufacturer id, 0x475c is device id */
+ .device_id = 0x475c,
+ .bustype = pcmcia_bustype,
+ .have_dio = 1,
+ },
{- .name = "ni_daq_dio24",
- .device_id = 0x475c, /* 0x10b is manufacturer id, 0x475c is device id */
- .bustype = pcmcia_bustype,
- .have_dio = 1,
- },
+ .name = "ni_daq_dio24",
+ /* 0x10b is manufacturer id, 0x475c is device id */
+ .device_id = 0x475c,
+ .bustype = pcmcia_bustype,
+ .have_dio = 1,
+ },
};
/*
@@ -134,22 +140,21 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
#endif
break;
default:
- printk("bug! couldn't determine board type\n");
+ printk(KERN_INFO "bug! couldn't determine board type\n");
return -EINVAL;
break;
}
- printk("comedi%d: ni_daq_dio24: %s, io 0x%lx", dev->minor,
+ printk(KERN_INFO "comedi%d: ni_daq_dio24: %s, io 0x%lx", dev->minor,
thisboard->name, iobase);
#ifdef incomplete
- if (irq) {
+ if (irq)
printk(", irq %u", irq);- }
#endif
printk("\n");
if (iobase == 0) {
- printk("io base address is zero!\n");
+ printk(KERN_INFO "io base address is zero!\n");
return -EINVAL;
}@@ -174,7 +179,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
static int dio24_detach(struct comedi_device *dev) {
- printk("comedi%d: ni_daq_dio24: remove\n", dev->minor);
+ printk(KERN_INFO "comedi%d: ni_daq_dio24: remove\n", dev->minor);
if (dev->subdevices)
subdev_8255_cleanup(dev, dev->subdevices + 0);
@@ -390,9 +395,9 @@ static void dio24_config(struct pcmcia_device *link)
}
/*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
+ * Allocate an interrupt line. Note that this does not assign a
+ * handler to the interrupt, unless the 'Handler' member of the
+ * irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
@@ -401,17 +406,17 @@ static void dio24_config(struct pcmcia_device *link)
}
/*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
+ * This actually configures the PCMCIA socket -- setting up
+ * the I/O windows and the interrupt mapping, and putting the
+ * card and host interface into "Memory and IO" mode.
*/
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
/*- At this point, the dev_node_t structure(s) need to be
- initialized and arranged in a linked list at link->dev.
+ * At this point, the dev_node_t structure(s) need to be
+ * initialized and arranged in a linked list at link->dev.
*/ sprintf(dev->node.dev_name, "ni_daq_dio24"); dev->node.major = dev->node.minor = 0;
Signature · 1 line
1.6.0.4
Quoted 1 line
From
ce043603489db7592ff7527ae97630d7c6100296Mon Sep 17 00:00:00 2001
From: Stewart Robertson <str@minty7.(none)>
Date: Sat, 27 Feb 2010 10:03:27 +0000
Subject: [PATCH] Staging: comedi: fix coding style issues
This is a patch to the ni_daq_dio24.c file that fixes line over 80 characters and KERN_INFO issues found by checkpatch.pl
--- drivers/staging/comedi/drivers/ni_daq_dio24.c | 67 +++++++++++++----------- 1 files changed, 36 insertions(+), 31 deletions(-)
drivers/staging/comedi/drivers/ni_daq_dio24.c +36 -31
139 lines not on this page · raw message
Signature · 1 line
1.6.0.4
Hi Stewart,
Quoted 5 lines · Stewart Robertson
I did some research and had a go at fixing the warning 'WARNING:
printk()should includeKERN_facility level'
by addingKERN_INFOin front of the quoted text. Please let me know if that is the right thing to do and if not,
what I should do instead.
Yes this is right thing to do "printk(KERN_INFO "");" You can also do pr_info("");
Cheers,
Ameya.
Hey,
Quoted 1 line · Stewart Robertson
From: Stewart Robertson <str@minty7.(none)>
Could you use a proper email-address here, please?
Quoted 5 lines
Date: Sat, 27 Feb 2010 10:03:27 +0000
Subject: [PATCH] Staging: comedi: fix coding style issues This is a patch to theni_daq_dio24.cfile that fixes line over 80 characters andKERN_INFOissues found by checkpatch.plSigned-off-by Stewart Robertson <[email protected]>
Please add a few spare blank lines between the Subject and the message, and between the latter and the SoB-line.
Thanks!
Dominik