Skip to contentSkip to conversation

Pull request: u-boot-imx

GIT PULL Stefano Babic 2 participants 8 messages Mar 2, 2010 – Mar 5, 2010

lore
Share & tools
lore
#0 lore raw

Hi Tom,

The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
Frans Meulenbroeks (1):
cmd_itest.c: fix pointer dereferencing

are available in the git repository at:

git://git.denx.de/u-boot-imx master

John Rigby (5):
mxc_serial replace platform specific clock Add support for Freescale MX25 SOC
fec_mxc: cleanup and factor out MX27 dependencies
fec_mxc: add MX25 support
Add support for KARO TX25 board

Stefano Babic (9):
MX51: Add initial support for the Freescale MX51
MX51: Add register definitions
MX51: Add pin and multiplexer definitions.
serial_mxc: add support for MX51 processor
mmc: check correctness of the voltage mask in ocr
MMC: add weak function to detect MMC/SD card
ARM: add accessors functions
fsl_esdhc: add support for mx51 processor Add initial support for Freescale mx51evk board

 MAINTAINERS                              |    8 +
 MAKEALL                                  |    1 +
 Makefile                                 |    8 +
 board/freescale/mx51evk/Makefile         |   48 ++++
 board/freescale/mx51evk/config.mk        |   25 ++
 board/freescale/mx51evk/imximage.cfg     |  119 +++++++++
 board/freescale/mx51evk/mx51evk.c        |  406
++++++++++++++++++++++++++++
 board/freescale/mx51evk/mx51evk.h        |   51 ++++
 board/karo/tx25/Makefile                 |   51 ++++
 board/karo/tx25/config.mk                |    5 +
 board/karo/tx25/lowlevel_init.S          |  131 +++++++++
 board/karo/tx25/tx25.c                   |  176 +++++++++++++
 cpu/arm926ejs/mx25/Makefile              |   46 ++++
 cpu/arm926ejs/mx25/generic.c             |  263 +++++++++++++++++++
 cpu/arm926ejs/mx25/reset.c               |   56 ++++
 cpu/arm926ejs/mx25/timer.c               |  187 +++++++++++++
 cpu/arm926ejs/mx27/generic.c             |    5 +
 cpu/arm_cortexa8/mx51/Makefile           |   48 ++++
 cpu/arm_cortexa8/mx51/clock.c            |  293 +++++++++++++++++++++
 cpu/arm_cortexa8/mx51/iomux.c            |  165 ++++++++++++
 cpu/arm_cortexa8/mx51/lowlevel_init.S    |  289 ++++++++++++++++++++
 cpu/arm_cortexa8/mx51/soc.c              |  109 ++++++++
 cpu/arm_cortexa8/mx51/speed.c            |   38 +++
 cpu/arm_cortexa8/mx51/timer.c            |  119 +++++++++
 cpu/arm_cortexa8/mx51/u-boot.lds         |   61 +++++
 drivers/mmc/fsl_esdhc.c                  |  149 +++++++----
 drivers/mmc/mmc.c                        |   17 ++-
 drivers/net/fec_mxc.c                    |   44 +++-
 drivers/net/fec_mxc.h                    |   32 +++-
 drivers/serial/serial_mxc.c              |   28 ++-
 include/asm-arm/arch-mx25/clock.h        |   36 +++
 include/asm-arm/arch-mx25/imx-regs.h     |  316 ++++++++++++++++++++++
 include/asm-arm/arch-mx25/imx25-pinmux.h |  421
++++++++++++++++++++++++++++++
 include/asm-arm/arch-mx27/clock.h        |    3 +
 include/asm-arm/arch-mx31/mx31.h         |    1 +
 include/asm-arm/arch-mx51/asm-offsets.h  |   50 ++++
 include/asm-arm/arch-mx51/clock.h        |   31 +++
 include/asm-arm/arch-mx51/crm_regs.h     |  192 ++++++++++++++
 include/asm-arm/arch-mx51/imx-regs.h     |  282 ++++++++++++++++++++
 include/asm-arm/arch-mx51/iomux.h        |  193 ++++++++++++++
 include/asm-arm/arch-mx51/mx51_pins.h    |  374 ++++++++++++++++++++++++++
 include/asm-arm/global_data.h            |    3 +
 include/asm-arm/io.h                     |   55 ++++
 include/configs/mx51evk.h                |  172 ++++++++++++
 include/configs/tx25.h                   |  179 +++++++++++++
 include/fsl_esdhc.h                      |   27 ++
 include/mmc.h                            |    1 +
 lib_arm/board.c                          |    3 +
 nand_spl/board/karo/tx25/Makefile        |   78 ++++++
 nand_spl/board/karo/tx25/config.mk       |    1 +
 nand_spl/board/karo/tx25/u-boot.lds      |   58 ++++
 51 files changed, 5386 insertions(+), 68 deletions(-)
 create mode 100644 board/freescale/mx51evk/Makefile
 create mode 100644 board/freescale/mx51evk/config.mk
 create mode 100644 board/freescale/mx51evk/imximage.cfg
 create mode 100644 board/freescale/mx51evk/mx51evk.c
 create mode 100644 board/freescale/mx51evk/mx51evk.h
 create mode 100644 board/karo/tx25/Makefile
 create mode 100644 board/karo/tx25/config.mk
 create mode 100644 board/karo/tx25/lowlevel_init.S
 create mode 100644 board/karo/tx25/tx25.c
 create mode 100644 cpu/arm926ejs/mx25/Makefile
 create mode 100644 cpu/arm926ejs/mx25/generic.c
 create mode 100644 cpu/arm926ejs/mx25/reset.c
 create mode 100644 cpu/arm926ejs/mx25/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/Makefile
 create mode 100644 cpu/arm_cortexa8/mx51/clock.c
 create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
 create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
 create mode 100644 cpu/arm_cortexa8/mx51/soc.c
 create mode 100644 cpu/arm_cortexa8/mx51/speed.c
 create mode 100644 cpu/arm_cortexa8/mx51/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
 create mode 100644 include/asm-arm/arch-mx25/clock.h
 create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
 create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
 create mode 100644 include/asm-arm/arch-mx51/clock.h
 create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
 create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx51/iomux.h
 create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
 create mode 100644 include/configs/mx51evk.h
 create mode 100644 include/configs/tx25.h
 create mode 100644 nand_spl/board/karo/tx25/Makefile
 create mode 100644 nand_spl/board/karo/tx25/config.mk
 create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#1 lore raw

There are some compiler warnings.
These should be resolved.

mx51evk.ERR

soc.c: In function 'print_cpuinfo':
soc.c:68: warning: implicit declaration of function 'get_mcu_main_clk' soc.c: In function 'cpu_mmc_init':
soc.c:99: warning: implicit declaration of function 'fsl_esdhc_mmc_init' clock.c:45: warning: initialization makes pointer from integer without a cast speed.c: In function 'get_clocks':
speed.c:35: warning: implicit declaration of function 'mxc_get_clock' mx51evk.c: In function 'board_init':
mx51evk.c:354: warning: implicit declaration of function 'get_cpu_rev'

Tom

Quoted 118 lines · Stefano Babic

Hi Tom,

The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
Frans Meulenbroeks (1):
cmd_itest.c: fix pointer dereferencing

are available in the git repository at:

git://git.denx.de/u-boot-imx master

John Rigby (5):
mxc_serial replace platform specific clock Add support for Freescale MX25 SOC
fec_mxc: cleanup and factor out MX27 dependencies
fec_mxc: add MX25 support
Add support for KARO TX25 board

Stefano Babic (9):
MX51: Add initial support for the Freescale MX51
MX51: Add register definitions
MX51: Add pin and multiplexer definitions.
serial_mxc: add support for MX51 processor
mmc: check correctness of the voltage mask in ocr
MMC: add weak function to detect MMC/SD card
ARM: add accessors functions
fsl_esdhc: add support for mx51 processor Add initial support for Freescale mx51evk board

 MAINTAINERS                              |    8 +
 MAKEALL                                  |    1 +
 Makefile                                 |    8 +
 board/freescale/mx51evk/Makefile         |   48 ++++
 board/freescale/mx51evk/config.mk        |   25 ++
 board/freescale/mx51evk/imximage.cfg     |  119 +++++++++
 board/freescale/mx51evk/mx51evk.c        |  406
++++++++++++++++++++++++++++
 board/freescale/mx51evk/mx51evk.h        |   51 ++++
 board/karo/tx25/Makefile                 |   51 ++++
 board/karo/tx25/config.mk                |    5 +
 board/karo/tx25/lowlevel_init.S          |  131 +++++++++
 board/karo/tx25/tx25.c                   |  176 +++++++++++++
 cpu/arm926ejs/mx25/Makefile              |   46 ++++
 cpu/arm926ejs/mx25/generic.c             |  263 +++++++++++++++++++
 cpu/arm926ejs/mx25/reset.c               |   56 ++++
 cpu/arm926ejs/mx25/timer.c               |  187 +++++++++++++
 cpu/arm926ejs/mx27/generic.c             |    5 +
 cpu/arm_cortexa8/mx51/Makefile           |   48 ++++
 cpu/arm_cortexa8/mx51/clock.c            |  293 +++++++++++++++++++++
 cpu/arm_cortexa8/mx51/iomux.c            |  165 ++++++++++++
 cpu/arm_cortexa8/mx51/lowlevel_init.S    |  289 ++++++++++++++++++++
 cpu/arm_cortexa8/mx51/soc.c              |  109 ++++++++
 cpu/arm_cortexa8/mx51/speed.c            |   38 +++
 cpu/arm_cortexa8/mx51/timer.c            |  119 +++++++++
 cpu/arm_cortexa8/mx51/u-boot.lds         |   61 +++++
 drivers/mmc/fsl_esdhc.c                  |  149 +++++++----
 drivers/mmc/mmc.c                        |   17 ++-
 drivers/net/fec_mxc.c                    |   44 +++-
 drivers/net/fec_mxc.h                    |   32 +++-
 drivers/serial/serial_mxc.c              |   28 ++-
 include/asm-arm/arch-mx25/clock.h        |   36 +++
 include/asm-arm/arch-mx25/imx-regs.h     |  316 ++++++++++++++++++++++
 include/asm-arm/arch-mx25/imx25-pinmux.h |  421
++++++++++++++++++++++++++++++
 include/asm-arm/arch-mx27/clock.h        |    3 +
 include/asm-arm/arch-mx31/mx31.h         |    1 +
 include/asm-arm/arch-mx51/asm-offsets.h  |   50 ++++
 include/asm-arm/arch-mx51/clock.h        |   31 +++
 include/asm-arm/arch-mx51/crm_regs.h     |  192 ++++++++++++++
 include/asm-arm/arch-mx51/imx-regs.h     |  282 ++++++++++++++++++++
 include/asm-arm/arch-mx51/iomux.h        |  193 ++++++++++++++
 include/asm-arm/arch-mx51/mx51_pins.h    |  374 ++++++++++++++++++++++++++
 include/asm-arm/global_data.h            |    3 +
 include/asm-arm/io.h                     |   55 ++++
 include/configs/mx51evk.h                |  172 ++++++++++++
 include/configs/tx25.h                   |  179 +++++++++++++
 include/fsl_esdhc.h                      |   27 ++
 include/mmc.h                            |    1 +
 lib_arm/board.c                          |    3 +
 nand_spl/board/karo/tx25/Makefile        |   78 ++++++
 nand_spl/board/karo/tx25/config.mk       |    1 +
 nand_spl/board/karo/tx25/u-boot.lds      |   58 ++++
 51 files changed, 5386 insertions(+), 68 deletions(-)
 create mode 100644 board/freescale/mx51evk/Makefile
 create mode 100644 board/freescale/mx51evk/config.mk
 create mode 100644 board/freescale/mx51evk/imximage.cfg
 create mode 100644 board/freescale/mx51evk/mx51evk.c
 create mode 100644 board/freescale/mx51evk/mx51evk.h
 create mode 100644 board/karo/tx25/Makefile
 create mode 100644 board/karo/tx25/config.mk
 create mode 100644 board/karo/tx25/lowlevel_init.S
 create mode 100644 board/karo/tx25/tx25.c
 create mode 100644 cpu/arm926ejs/mx25/Makefile
 create mode 100644 cpu/arm926ejs/mx25/generic.c
 create mode 100644 cpu/arm926ejs/mx25/reset.c
 create mode 100644 cpu/arm926ejs/mx25/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/Makefile
 create mode 100644 cpu/arm_cortexa8/mx51/clock.c
 create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
 create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
 create mode 100644 cpu/arm_cortexa8/mx51/soc.c
 create mode 100644 cpu/arm_cortexa8/mx51/speed.c
 create mode 100644 cpu/arm_cortexa8/mx51/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
 create mode 100644 include/asm-arm/arch-mx25/clock.h
 create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
 create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
 create mode 100644 include/asm-arm/arch-mx51/clock.h
 create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
 create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx51/iomux.h
 create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
 create mode 100644 include/configs/mx51evk.h
 create mode 100644 include/configs/tx25.h
 create mode 100644 nand_spl/board/karo/tx25/Makefile
 create mode 100644 nand_spl/board/karo/tx25/config.mk
 create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
#4 lore raw
In reply to Stefano Babic
Quoted 17 lines · Stefano Babic

Hi Tom,

The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
Frans Meulenbroeks (1):
cmd_itest.c: fix pointer dereferencing

are available in the git repository at:

git://git.denx.de/u-boot-imx master

John Rigby (5):
mxc_serial replace platform specific clock Add support for Freescale MX25 SOC
fec_mxc: cleanup and factor out MX27 dependencies
fec_mxc: add MX25 support
Add support for KARO TX25 board

Quoted 11 lines

Stefano Babic (9):
MX51: Add initial support for the Freescale MX51
MX51: Add register definitions
MX51: Add pin and multiplexer definitions.
serial_mxc: add support for MX51 processor
mmc: check correctness of the voltage mask in ocr
MMC: add weak function to detect MMC/SD card
ARM: add accessors functions
fsl_esdhc: add support for mx51 processor Add initial support for Freescale mx51evk board

This has been applied to ARM/master
The fixes for the warning expected but not required. Thanks,
Tom

Quoted 90 lines
 MAINTAINERS                              |    8 +
 MAKEALL                                  |    1 +
 Makefile                                 |    8 +
 board/freescale/mx51evk/Makefile         |   48 ++++
 board/freescale/mx51evk/config.mk        |   25 ++
 board/freescale/mx51evk/imximage.cfg     |  119 +++++++++
 board/freescale/mx51evk/mx51evk.c        |  406
++++++++++++++++++++++++++++
 board/freescale/mx51evk/mx51evk.h        |   51 ++++
 board/karo/tx25/Makefile                 |   51 ++++
 board/karo/tx25/config.mk                |    5 +
 board/karo/tx25/lowlevel_init.S          |  131 +++++++++
 board/karo/tx25/tx25.c                   |  176 +++++++++++++
 cpu/arm926ejs/mx25/Makefile              |   46 ++++
 cpu/arm926ejs/mx25/generic.c             |  263 +++++++++++++++++++
 cpu/arm926ejs/mx25/reset.c               |   56 ++++
 cpu/arm926ejs/mx25/timer.c               |  187 +++++++++++++
 cpu/arm926ejs/mx27/generic.c             |    5 +
 cpu/arm_cortexa8/mx51/Makefile           |   48 ++++
 cpu/arm_cortexa8/mx51/clock.c            |  293 +++++++++++++++++++++
 cpu/arm_cortexa8/mx51/iomux.c            |  165 ++++++++++++
 cpu/arm_cortexa8/mx51/lowlevel_init.S    |  289 ++++++++++++++++++++
 cpu/arm_cortexa8/mx51/soc.c              |  109 ++++++++
 cpu/arm_cortexa8/mx51/speed.c            |   38 +++
 cpu/arm_cortexa8/mx51/timer.c            |  119 +++++++++
 cpu/arm_cortexa8/mx51/u-boot.lds         |   61 +++++
 drivers/mmc/fsl_esdhc.c                  |  149 +++++++----
 drivers/mmc/mmc.c                        |   17 ++-
 drivers/net/fec_mxc.c                    |   44 +++-
 drivers/net/fec_mxc.h                    |   32 +++-
 drivers/serial/serial_mxc.c              |   28 ++-
 include/asm-arm/arch-mx25/clock.h        |   36 +++
 include/asm-arm/arch-mx25/imx-regs.h     |  316 ++++++++++++++++++++++
 include/asm-arm/arch-mx25/imx25-pinmux.h |  421
++++++++++++++++++++++++++++++
 include/asm-arm/arch-mx27/clock.h        |    3 +
 include/asm-arm/arch-mx31/mx31.h         |    1 +
 include/asm-arm/arch-mx51/asm-offsets.h  |   50 ++++
 include/asm-arm/arch-mx51/clock.h        |   31 +++
 include/asm-arm/arch-mx51/crm_regs.h     |  192 ++++++++++++++
 include/asm-arm/arch-mx51/imx-regs.h     |  282 ++++++++++++++++++++
 include/asm-arm/arch-mx51/iomux.h        |  193 ++++++++++++++
 include/asm-arm/arch-mx51/mx51_pins.h    |  374 ++++++++++++++++++++++++++
 include/asm-arm/global_data.h            |    3 +
 include/asm-arm/io.h                     |   55 ++++
 include/configs/mx51evk.h                |  172 ++++++++++++
 include/configs/tx25.h                   |  179 +++++++++++++
 include/fsl_esdhc.h                      |   27 ++
 include/mmc.h                            |    1 +
 lib_arm/board.c                          |    3 +
 nand_spl/board/karo/tx25/Makefile        |   78 ++++++
 nand_spl/board/karo/tx25/config.mk       |    1 +
 nand_spl/board/karo/tx25/u-boot.lds      |   58 ++++
 51 files changed, 5386 insertions(+), 68 deletions(-)
 create mode 100644 board/freescale/mx51evk/Makefile
 create mode 100644 board/freescale/mx51evk/config.mk
 create mode 100644 board/freescale/mx51evk/imximage.cfg
 create mode 100644 board/freescale/mx51evk/mx51evk.c
 create mode 100644 board/freescale/mx51evk/mx51evk.h
 create mode 100644 board/karo/tx25/Makefile
 create mode 100644 board/karo/tx25/config.mk
 create mode 100644 board/karo/tx25/lowlevel_init.S
 create mode 100644 board/karo/tx25/tx25.c
 create mode 100644 cpu/arm926ejs/mx25/Makefile
 create mode 100644 cpu/arm926ejs/mx25/generic.c
 create mode 100644 cpu/arm926ejs/mx25/reset.c
 create mode 100644 cpu/arm926ejs/mx25/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/Makefile
 create mode 100644 cpu/arm_cortexa8/mx51/clock.c
 create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
 create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
 create mode 100644 cpu/arm_cortexa8/mx51/soc.c
 create mode 100644 cpu/arm_cortexa8/mx51/speed.c
 create mode 100644 cpu/arm_cortexa8/mx51/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
 create mode 100644 include/asm-arm/arch-mx25/clock.h
 create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
 create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
 create mode 100644 include/asm-arm/arch-mx51/clock.h
 create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
 create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx51/iomux.h
 create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
 create mode 100644 include/configs/mx51evk.h
 create mode 100644 include/configs/tx25.h
 create mode 100644 nand_spl/board/karo/tx25/Makefile
 create mode 100644 nand_spl/board/karo/tx25/config.mk
 create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
#5 lore raw
Quoted 4 lines · Tom

This has been applied to ARM/master
The fixes for the warning expected but not required. Thanks,
Tom

Thanks, Tom. You are faster as I can send a git-pull-request ;)

In fact, I have an hour ago updated the u-boot-imx branch, pulling the modified patches to remove warnings (patches was sent for small review yesterday, I have waited a while to be sure). Is there a chance to take the updated u-boot-imx branch or I have to send patches on top of arm master ?

Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#6 lore raw
Quoted 8 lines · Stefano Babic
Quoted 4 lines · Tom

This has been applied to ARM/master
The fixes for the warning expected but not required. Thanks,
Tom

Thanks, Tom. You are faster as I can send a git-pull-request ;)

Quoted 8 lines

In fact, I have an hour ago updated the u-boot-imx branch, pulling the modified patches to remove warnings (patches was sent for small review yesterday, I have waited a while to be sure). Is there a chance to take the updated u-boot-imx branch or I have to send patches on top of arm master ?

Stefano

I think the best thing to do is to send me a pull request soon when you think the imx branch is in good shape. I noticed, but did not apply, some of the imx changes that came after your first pull request. These should be included in the next pull request.

I will send Wolfgang a pull request soon (this weekend) so if there is something that needs to get into the main release, please send me a request today or at the latest tomorrow.

Tom

#7 lore raw
Quoted 4 lines · Tom

I think the best thing to do is to send me a pull request soon when you think the imx branch is in good shape. I noticed, but did not apply, some of the imx changes that came after your first pull request. These should be included in the next pull request.

Ok, thanks. I send you the pull request.

Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#2 lore raw
In reply to Tom

Tom,

this is the updated pull-request for u-boot-imx. Warnings from mx51evk were removed and the magnesium board was added (acked by Wolfgang to get it in the release).

The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
Frans Meulenbroeks (1):
cmd_itest.c: fix pointer dereferencing

are available in the git repository at:

git://git.denx.de/u-boot-imx master

Heiko Schocher (2):
arm, mx27: add support for SDHC1 pin init
arm, i.mx27: add support for magnesium board from projectiondesign

John Rigby (5):
mxc_serial replace platform specific clock Add support for Freescale MX25 SOC
fec_mxc: cleanup and factor out MX27 dependencies
fec_mxc: add MX25 support
Add support for KARO TX25 board

Stefano Babic (9):
MX51: Add initial support for the Freescale MX51
MX51: Add register definitions
MX51: Add pin and multiplexer definitions.
serial_mxc: add support for MX51 processor
mmc: check correctness of the voltage mask in ocr
MMC: add weak function to detect MMC/SD card
ARM: add accessors functions
fsl_esdhc: add support for mx51 processor Add initial support for Freescale mx51evk board

 MAINTAINERS                              |   12 +
 MAKEALL                                  |    2 +
 Makefile                                 |    9 +
 board/freescale/mx51evk/Makefile         |   48 ++++
 board/freescale/mx51evk/config.mk        |   25 ++
 board/freescale/mx51evk/imximage.cfg     |  119 +++++++++
 board/freescale/mx51evk/mx51evk.c        |  397
++++++++++++++++++++++++++++
 board/freescale/mx51evk/mx51evk.h        |   51 ++++
 board/karo/tx25/Makefile                 |   51 ++++
 board/karo/tx25/config.mk                |    5 +
 board/karo/tx25/lowlevel_init.S          |  131 +++++++++
 board/karo/tx25/tx25.c                   |  176 +++++++++++++
 board/logicpd/imx27lite/imx27lite.c      |   18 ++-
 cpu/arm926ejs/mx25/Makefile              |   46 ++++
 cpu/arm926ejs/mx25/generic.c             |  263 +++++++++++++++++++
 cpu/arm926ejs/mx25/reset.c               |   56 ++++
 cpu/arm926ejs/mx25/timer.c               |  187 +++++++++++++
 cpu/arm926ejs/mx27/generic.c             |   22 ++
 cpu/arm_cortexa8/mx51/Makefile           |   48 ++++
 cpu/arm_cortexa8/mx51/clock.c            |  294 +++++++++++++++++++++
 cpu/arm_cortexa8/mx51/iomux.c            |  166 ++++++++++++
 cpu/arm_cortexa8/mx51/lowlevel_init.S    |  288 ++++++++++++++++++++
 cpu/arm_cortexa8/mx51/soc.c              |  114 ++++++++
 cpu/arm_cortexa8/mx51/speed.c            |   39 +++
 cpu/arm_cortexa8/mx51/timer.c            |  119 +++++++++
 cpu/arm_cortexa8/mx51/u-boot.lds         |   61 +++++
 drivers/mmc/fsl_esdhc.c                  |  149 +++++++----
 drivers/mmc/mmc.c                        |   17 ++-
 drivers/net/fec_mxc.c                    |   44 +++-
 drivers/net/fec_mxc.h                    |   32 +++-
 drivers/serial/serial_mxc.c              |   28 ++-
 include/asm-arm/arch-mx25/clock.h        |   36 +++
 include/asm-arm/arch-mx25/imx-regs.h     |  316 ++++++++++++++++++++++
 include/asm-arm/arch-mx27/imx-regs.h     |    1 +
 include/asm-arm/arch-mx31/mx31.h         |    1 +
 include/asm-arm/arch-mx51/asm-offsets.h  |   50 ++++
 include/asm-arm/arch-mx51/clock.h        |   43 +++
 include/asm-arm/arch-mx51/crm_regs.h     |  192 ++++++++++++++
 include/asm-arm/arch-mx51/imx-regs.h     |  261 ++++++++++++++++++
 include/asm-arm/arch-mx51/iomux.h        |  193 ++++++++++++++
 include/asm-arm/arch-mx51/mx51_pins.h    |  374 ++++++++++++++++++++++++++
 include/asm-arm/arch-mx51/sys_proto.h    |   30 +++
 include/asm-arm/global_data.h            |    3 +
 include/asm-arm/io.h                     |   55 ++++
 include/configs/imx27lite-common.h       |  237 +++++++++++++++++
 include/configs/imx27lite.h              |  200 +--------------
 include/configs/magnesium.h              |   71 +++++
 include/configs/mx51evk.h                |  172 ++++++++++++
 include/configs/tx25.h                   |  179 +++++++++++++
 include/fsl_esdhc.h                      |   27 ++
 include/mmc.h                            |    1 +
 lib_arm/board.c                          |    3 +
 nand_spl/board/karo/tx25/Makefile        |   78 ++++++
 nand_spl/board/karo/tx25/config.mk       |    1 +
 nand_spl/board/karo/tx25/u-boot.lds      |   58 ++++
 57 files changed, 5758 insertions(+), 265 deletions(-)
 create mode 100644 board/freescale/mx51evk/Makefile
 create mode 100644 board/freescale/mx51evk/config.mk
 create mode 100644 board/freescale/mx51evk/imximage.cfg
 create mode 100644 board/freescale/mx51evk/mx51evk.c
 create mode 100644 board/freescale/mx51evk/mx51evk.h
 create mode 100644 board/karo/tx25/Makefile
 create mode 100644 board/karo/tx25/config.mk
 create mode 100644 board/karo/tx25/lowlevel_init.S
 create mode 100644 board/karo/tx25/tx25.c
 create mode 100644 cpu/arm926ejs/mx25/Makefile
 create mode 100644 cpu/arm926ejs/mx25/generic.c
 create mode 100644 cpu/arm926ejs/mx25/reset.c
 create mode 100644 cpu/arm926ejs/mx25/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/Makefile
 create mode 100644 cpu/arm_cortexa8/mx51/clock.c
 create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
 create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
 create mode 100644 cpu/arm_cortexa8/mx51/soc.c
 create mode 100644 cpu/arm_cortexa8/mx51/speed.c
 create mode 100644 cpu/arm_cortexa8/mx51/timer.c
 create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
 create mode 100644 include/asm-arm/arch-mx25/clock.h
 create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
 create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
 create mode 100644 include/asm-arm/arch-mx51/clock.h
 create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
 create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
 create mode 100644 include/asm-arm/arch-mx51/iomux.h
 create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
 create mode 100644 include/asm-arm/arch-mx51/sys_proto.h
 create mode 100644 include/configs/imx27lite-common.h
 create mode 100644 include/configs/magnesium.h
 create mode 100644 include/configs/mx51evk.h
 create mode 100644 include/configs/tx25.h
 create mode 100644 nand_spl/board/karo/tx25/Makefile
 create mode 100644 nand_spl/board/karo/tx25/config.mk
 create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#3 lore raw

Tom,

this is the pull request after you have already merged part of u-boot-imx.

The following changes since commit 75b464b721408cd8b26ba92a249f0726f37c7249:
John Rigby (1):
Add support for KARO TX25 board

are available in the git repository at:

git://git.denx.de/u-boot-imx master

Heiko Schocher (2):
arm, mx27: add support for SDHC1 pin init
arm, i.mx27: add support for magnesium board from projectiondesign

Stefano Babic (1):
MX51: removed warnings for the mx51evk

 MAINTAINERS                           |    4 +
 MAKEALL                               |    1 +
 Makefile                              |    1 +
 board/freescale/mx51evk/mx51evk.c     |   11 +--
 board/logicpd/imx27lite/imx27lite.c   |   18 +++-
 cpu/arm926ejs/mx27/generic.c          |   17 +++
 cpu/arm_cortexa8/mx51/clock.c         |    3 +-
 cpu/arm_cortexa8/mx51/iomux.c         |    1 +
 cpu/arm_cortexa8/mx51/lowlevel_init.S |    1 -
 cpu/arm_cortexa8/mx51/soc.c           |    7 +-
 cpu/arm_cortexa8/mx51/speed.c         |    1 +
 include/asm-arm/arch-mx27/imx-regs.h  |    1 +
 include/asm-arm/arch-mx51/clock.h     |   16 ++-
 include/asm-arm/arch-mx51/imx-regs.h  |   21 ---
 include/asm-arm/arch-mx51/sys_proto.h |   30 ++++
 include/configs/imx27lite-common.h    |  237
+++++++++++++++++++++++++++++++++
 include/configs/imx27lite.h           |  200 +---------------------------
 include/configs/magnesium.h           |   71 ++++++++++
 18 files changed, 408 insertions(+), 233 deletions(-)
 create mode 100644 include/asm-arm/arch-mx51/sys_proto.h
 create mode 100644 include/configs/imx27lite-common.h
 create mode 100644 include/configs/magnesium.h

Thanks,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================