MPC5121e - using both USB modules

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi all,
I am working on a custom MPC5121e board, adapting 2.6.24 kernel. The board has two USB ports:
- - cell-index 0 uses internal phy
- - cell-index 1 uses external phy

For mechanical/commercial reasons I cannot use Mini-A / Mini-B connectors, so I have two "host" connectors, but the board should be capable of doing host or device by dip-switch selection and using an external M/M connector adapter.

First I enabled cell-index 0 only in dts file, dr_mode = "otg", used OTG kernel modules ; I succeeded in switching from host to device mode : port 0 is working.

Cell-index 1: disabled cell 0 and wrote some tweaks in drivers to enable correct USB clocks (I saw some recent patches about this), then realized that the hardware people have chosen a wrong ULPI phy (CY7C68003), which is capable of doing only device, not host (arrrggghh !!) ; next boards will have a different phy (capable of OTG).
I have some preliminary boards with this Cypress phy and tried enabling this cell in otg mode to try and see if I can work in device mode, but strange things
- - ehci_hub_control complains. I suppose the phy is not ok to work this way.

Now I am trying to arrive to something like:
cell-0 : dr_mode = otg
cell-1 : dr_mode = peripheral

This way I could save the preliminary boards, with cell-1 working only as a usb device. I am having problems with processor reset in inserting modules, still not clear what is happening.

Anyway, final target will be (new boards):
cell-0 : dr_mode = otg
cell-1 : dr_mode = otg
Each port will have its dip-switch to select host or device mode.

So, here we are:
- - anyone having some suggestions or link to documentation please ?
- - is it possible to have two ports working as "peripheral" ? Not necessary for me, but just to understand the "linux" constraints (if any).
I could, for example, use file_storage to one USB cell and ethernet-dev to the other...
I also have to investigate how to tell file_storage which USB cell to use : map both USB cells to the same pseudo-disk seems not good.

Thanks,
best regards

Lucio Dona'
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iD8DBQFLoN+FvxHCsvXy9okRAtvfAJ4pEaBgPfmKLVRgczx3C1yYlQ8QdwCfYoyO 0KCTXBxZrALLHG/7BziuZpA=
=W1D6
-----END PGP SIGNATURE-----

This is probably the Freescale-provided kernel, so you should ask them.

Or, even better, use the current mainline kernel and check the newly merged MPC5121-patches :)

Regards,

Wolfram

Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |