net, fec_mxc: setup the mac address in the device registers
PATCH v2 2/2 net, fec_mxc: setup the mac address in the device registers
always setup mac address register with the contents in ethaddr.
This is not in line with u-boot design principle "not to initalize not used devices", and maybe should go away, if there is a solution for passing the mac address to arm linux kernels.
Tested on the magnesium board.
Signed-off-by Heiko Schocher <[email protected]>
---
- changes since v1 posted here:
http://lists.denx.de/pipermail/u-boot/2010-March/069192.html
- splitted in two patches as Wolfgang suggested
drivers/net/fec_mxc.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/net/fec_mxc.c +2 -1
@@ -752,9 +752,10 @@ static int fec_probe(bd_t *bd)if (!eth_getenv_enetaddr ("ethaddr" , ethaddr)) {if (fec_get_hwaddr (edev, ethaddr) ==0 ) {printf ("got MAC address from EEPROM: %pM\n" , ethaddr); -memcpy (edev->enetaddr, ethaddr,6 ); } } +memcpy (edev->enetaddr, ethaddr,6 ); +fec_set_hwaddr (edev);return 0 ; }
Signature · 5 lines
1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany