Pull request: u-boot-imx
Hi Tom,
in the pull request there are also two patches by Heiko that were already included in the late pull, but they generated warnings and are not yet in mainline.
The patch to remove these warnings was already merged by Wolfgang and it is in mainline.
The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af:
Wolfgang Denk (1):
Merge branch 'next'
are available in the git repository at:
git.denx.de/u-boot-imx.git master
Fabio Estevam (1):
MX51EVK: Remove CPLD related code
Heiko Schocher (2):
arm, mx27: add support for SDHC1 pin init
arm, i.mx27: add support for magnesium board from projectiondesign
Stefano Babic (1):
Moved board specific values in config file
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 1 + board/freescale/mx51evk/mx51evk.c | 67 --------- board/freescale/mx51evk/mx51evk.h | 1 - board/logicpd/imx27lite/imx27lite.c | 18 +++- cpu/arm926ejs/mx27/generic.c | 17 +++ cpu/arm_cortexa8/mx51/lowlevel_init.S | 5 +- include/asm-arm/arch-mx27/imx-regs.h | 1 + include/configs/imx27lite-common.h | 237 +++++++++++++++++++++++++++++++++ include/configs/imx27lite.h | 200 +--------------------------- include/configs/magnesium.h | 71 ++++++++++ include/configs/mx51evk.h | 3 + 13 files changed, 360 insertions(+), 266 deletions(-) create mode 100644 include/configs/imx27lite-common.h create mode 100644 include/configs/magnesium.h
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
Tom Rix
AppliedQuoted 36 lines · Stefano Babic
Hi Tom,
in the pull request there are also two patches by Heiko that were already included in the late pull, but they generated warnings and are not yet in mainline.
The patch to remove these warnings was already merged by Wolfgang and it is in mainline.The following changes since commit
ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af:
Wolfgang Denk (1):
Merge branch 'next'are available in the git repository at:
git.denx.de/u-boot-imx.git master
Fabio Estevam (1):
MX51EVK: Remove CPLD related codeHeiko Schocher (2):
arm, mx27: add support for SDHC1 pin init
arm, i.mx27: add support for magnesium board from projectiondesignStefano Babic (1):
Moved board specific values in config fileMAINTAINERS | 4 + MAKEALL | 1 + Makefile | 1 + board/freescale/mx51evk/mx51evk.c | 67 --------- board/freescale/mx51evk/mx51evk.h | 1 - board/logicpd/imx27lite/imx27lite.c | 18 +++- cpu/arm926ejs/mx27/generic.c | 17 +++ cpu/arm_cortexa8/mx51/lowlevel_init.S | 5 +- include/asm-arm/arch-mx27/imx-regs.h | 1 +
Quoted 9 lines
include/configs/imx27lite-common.h | 237 +++++++++++++++++++++++++++++++++ include/configs/imx27lite.h | 200 +--------------------------- include/configs/magnesium.h | 71 ++++++++++ include/configs/mx51evk.h | 3 + 13 files changed, 360 insertions(+), 266 deletions(-) create mode 100644 include/configs/imx27lite-common.h create mode 100644 include/configs/magnesium.h
Applied to arm/master.
Thanks
Tom