Skip to contentSkip to conversation

mpc832x: add support for mpc8321 based tuda1 board

PATCH New Heiko Schocher 1 participant 1 message Apr 12, 2010 Kbuild

lore
Share & tools
lore

Heiko Schocher

author
#0 lore raw

PATCH 4/4 mpc832x: add support for mpc8321 based tuda1 board

This board is similar to suvd3 board. So most initialisation topics are taken from suvd3 (UART1, Ethernet, piggy PHY, flash, ram) only the application specific chip selects differ.

Signed-off-by Lukas Roggli <[email protected]>
Signed-off-by Holger Brunck <[email protected]>
Signed-off-by Heiko Schocher <[email protected]>
---
 MAINTAINERS             |    1 +
 MAKEALL                 |    1 +
 Makefile                |    3 +-
 include/configs/tuda1.h |  250 +++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 254 insertions(+), 1 deletions(-)
 create mode 100644 include/configs/tuda1.h
MAINTAINERS +1 -0
index e2f2eb6..91b79b8 100644
@@ -413,6 +413,7 @@ Heiko Schocher <[email protected]>
 	sc3		PPC405GP
 	suen3		ARM926EJS (Kirkwood SoC)
 	suvd3		MPC8321
+	tuda1		MPC8321
 	tuxa1		MPC8321
 	uc101		MPC5200
MAKEALL +1 -0
index db47b41..19b67b2 100755
@@ -377,6 +377,7 @@ LIST_83xx="		\
 	SIMPC8313_LP	\
 	suvd3		\
 	TQM834x		\
+	tuda1           \
 	tuxa1           \
 	vme8349		\
 "
Makefile +2 -1
index 40f411f..af19b64 100644
@@ -2394,8 +2394,9 @@ suvd3_config: unconfig
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
 
+tuda1_config \
 tuxa1_config: unconfig
-	@$(MKCONFIG) tuxa1 ppc mpc83xx km83xx keymile
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx km83xx keymile
 
 caddy2_config \
 vme8349_config:		unconfig
include/configs/tuda1.h new file +250 -0

250 lines not on this page · raw message

Signature · 5 lines
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany