USB_SERIAL_KEYSPAN_* dependency on FIRMWARE_IN_KERNEL
Subsystems (2)
Hi David,
I recently disabled CONFIG_FIRMWARE_IN_KERNEL in the default openSUSE kernels (as no built-in driver needs firmware and the initrd takes care of the modules), but this disabled all the CONFIG_USB_SERIAL_KEYSPAN_* options, because there is
config USB_SERIAL_KEYSPAN_MPR
bool "USB Keyspan MPR Firmware"
depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
etc
in drivers/usb/serial/Kconfig, added in 2971c57 by you. Is there a reason for this dependency or shouldn't this rather depend on FW_LOADER? On a related note, firmware/Makefile has
ifdef CONFIG_FIRMWARE_IN_KERNEL fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
...
else
fw-shipped- += keyspan/mpr.fw ...
endif
which just duplicates the dependency (if CONFIG_FIRMWARE_IN_KERNEL is not set, the CONFIG_USB_SERIAL_KEYSPAN_* options won't be set either). Note that I do not have the hardware, so maybe I'm missing something obvious...
thanks,
Michal
Quoted 7 lines · Michal Marek
Hi David,
I recently disabled
CONFIG_FIRMWARE_IN_KERNELin the default openSUSE kernels (as no built-in driver needs firmware and the initrd takes care of the modules), but this disabled all the CONFIG_USB_SERIAL_KEYSPAN_* options, because there is
Quoted 7 lines
config
USB_SERIAL_KEYSPAN_MPR
bool "USB Keyspan MPR Firmware"
depends onUSB_SERIAL_KEYSPAN&&FIRMWARE_IN_KERNEL
etcin
drivers/usb/serial/Kconfig, added in 2971c57 by you. Is there a reason for this dependency or shouldn't this rather depend onFW_LOADER?
I found another problem, the kconfig options to select the firmware files are boolean, so scripts/Makefile.fwinst assumes that the firmware is meant for a built-in driver and doesn't install it during modules_install. This patch should fix that.
Michal
Quoted 1 line
From
2092944f13dbc5f5eee313e4b697e105f18a4b9aMon Sep 17 00:00:00 2001
From: Michal Marek <[email protected]>
Date: Tue, 4 May 2010 12:11:29 +0200
Subject: [PATCH] Fix USB_SERIAL_KEYSPAN firmware dependencies
Make sure the selected firmware is installed during modules_install. Also drop the dependency on FIRMWARE_IN_KERNEL which doesn't make sense.
drivers/usb/serial/Kconfig +39 -12
@@ -296,19 +296,19 @@ config USB_SERIAL_KEYSPAN config USB_SERIAL_KEYSPAN_MPR bool "USB Keyspan MPR Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the Keyspan MPR converter. config USB_SERIAL_KEYSPAN_USA28 bool "USB Keyspan USA-28 Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-28 converter. config USB_SERIAL_KEYSPAN_USA28X bool "USB Keyspan USA-28X Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-28X converter. Be sure you have a USA-28X, there are also 28XA and 28XB
@@ -316,7 +316,7 @@ config USB_SERIAL_KEYSPAN_USA28X config USB_SERIAL_KEYSPAN_USA28XA bool "USB Keyspan USA-28XA Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-28XA converter. Be sure you have a USA-28XA, there are also 28X and 28XB
@@ -324,7 +324,7 @@ config USB_SERIAL_KEYSPAN_USA28XA config USB_SERIAL_KEYSPAN_USA28XB bool "USB Keyspan USA-28XB Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-28XB converter. Be sure you have a USA-28XB, there are also 28X and 28XA
@@ -332,46 +332,73 @@ config USB_SERIAL_KEYSPAN_USA28XB config USB_SERIAL_KEYSPAN_USA19 bool "USB Keyspan USA-19 Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-19 converter. config USB_SERIAL_KEYSPAN_USA18X bool "USB Keyspan USA-18X Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-18X converter. config USB_SERIAL_KEYSPAN_USA19W bool "USB Keyspan USA-19W Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-19W converter. config USB_SERIAL_KEYSPAN_USA19QW bool "USB Keyspan USA-19QW Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-19QW converter. config USB_SERIAL_KEYSPAN_USA19QI bool "USB Keyspan USA-19QI Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-19QI converter. config USB_SERIAL_KEYSPAN_USA49W bool "USB Keyspan USA-49W Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-49W converter. config USB_SERIAL_KEYSPAN_USA49WLC bool "USB Keyspan USA-49WLC Firmware" - depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + depends on USB_SERIAL_KEYSPAN help Say Y here to include firmware for the USA-49WLC converter. +# These helpers make sure that the firmware files appear in fw-shipped-m +# and not fw-shipped-y if the driver is built as a module +config USB_SERIAL_KEYSPAN_MPR_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_MPR +config USB_SERIAL_KEYSPAN_USA28_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA28 +config USB_SERIAL_KEYSPAN_USA28X_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA28X +config USB_SERIAL_KEYSPAN_USA28XA_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA28XA +config USB_SERIAL_KEYSPAN_USA28XB_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA28XB +config USB_SERIAL_KEYSPAN_USA19_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA19 +config USB_SERIAL_KEYSPAN_USA18X_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA18X +config USB_SERIAL_KEYSPAN_USA19W_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA19W +config USB_SERIAL_KEYSPAN_USA19QW_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA19QW +config USB_SERIAL_KEYSPAN_USA19QI_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA19QI +config USB_SERIAL_KEYSPAN_USA49W_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA49W +config USB_SERIAL_KEYSPAN_USA49WLC_FW + def_tristate USB_SERIAL_KEYSPAN && USB_SERIAL_KEYSPAN_USA49WLC + config USB_SERIAL_KLSI tristate "USB KL5KUSB105 (Palmconnect) Driver" ---help---
firmware/Makefile +12 -19
@@ -76,25 +76,18 @@ fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \ fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \ kaweth/new_code_fix.bin \ kaweth/trigger_code_fix.bin -ifdef CONFIG_FIRMWARE_IN_KERNEL -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw -fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw -else -fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \ - keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \ - keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \ - keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw -endif +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR_FW) += keyspan/mpr.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X_FW) += keyspan/usa18x.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19_FW) += keyspan/usa19.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI_FW) += keyspan/usa19qi.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW_FW) += keyspan/usa19qw.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W_FW) += keyspan/usa19w.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28_FW) += keyspan/usa28.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA_FW) += keyspan/usa28xa.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB_FW) += keyspan/usa28xb.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X_FW) += keyspan/usa28x.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W_FW) += keyspan/usa49w.fw +fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC_FW) += keyspan/usa49wlc.fw fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \ mts_cdma.fw mts_gsm.fw mts_edge.fw fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \