Skip to contentSkip to conversation

qemu-kvm tests: merged stringio into emulator

PATCH Applied Naphtali Sprei 2 participants 2 messages May 3, 2010 – May 5, 2010 KVM

lore
Share & tools
lore

Naphtali Sprei

author
#0 lore raw

PATCH 1/1 qemu-kvm tests: merged stringio into emulator

based on 'next' branch.

Changed test-case stringio into C code and merged into emulator test-case. Removed traces of stringio test-case.

Signed-off-by Naphtali Sprei <[email protected]>
---
 kvm/user/config-x86-common.mak |    2 --
 kvm/user/config-x86_64.mak     |    4 ++--
 kvm/user/test/x86/README       |    1 -
 kvm/user/test/x86/emulator.c   |   31 ++++++++++++++++++++++++++++---
 kvm/user/test/x86/stringio.S   |   36 ------------------------------------
 5 files changed, 30 insertions(+), 44 deletions(-)
 delete mode 100644 kvm/user/test/x86/stringio.S
kvm/user/config-x86-common.mak +0 -2
index 61cc2f0..0ff9425 100644
@@ -56,8 +56,6 @@ $(TEST_DIR)/realmode.flat: $(TEST_DIR)/realmode.o
 
 $(TEST_DIR)/realmode.o: bits = 32
 
-$(TEST_DIR)/stringio.flat: $(cstart.o) $(TEST_DIR)/stringio.o
-
 $(TEST_DIR)/msr.flat: $(cstart.o) $(TEST_DIR)/msr.o
 
 arch_clean:
kvm/user/config-x86_64.mak +2 -2
index 03c91f2..3403dc3 100644
@@ -5,7 +5,7 @@ ldarch = elf64-x86-64
 CFLAGS += -D__x86_64__
 
 tests = $(TEST_DIR)/access.flat $(TEST_DIR)/sieve.flat \
-        $(TEST_DIR)/stringio.flat $(TEST_DIR)/emulator.flat \
-        $(TEST_DIR)/hypercall.flat $(TEST_DIR)/apic.flat
+	  $(TEST_DIR)/emulator.flat $(TEST_DIR)/hypercall.flat \
+	  $(TEST_DIR)/apic.flat
 
 include config-x86-common.mak
kvm/user/test/x86/README +0 -1
index e2ede5c..ab5a2ae 100644
@@ -10,6 +10,5 @@ realmode: goes back to realmode, shld, push/pop, mov immediate, cmp immediate, a
          io, eflags instructions (clc, cli, etc.), jcc short, jcc near, call, long jmp, xchg
 sieve: heavy memory access with no paging and with paging static and with paging vmalloc'ed
 smptest: run smp_id() on every cpu and compares return value to number
-stringio: outs forward and backward
 tsc: write to tsc(0) and write to tsc(100000000000) and read it back
 vmexit: long loops for each: cpuid, vmcall, mov_from_cr8, mov_to_cr8, inl_pmtimer, ipi, ipi+halt
kvm/user/test/x86/emulator.c +28 -3
index 4967d1f..5406062 100644
@@ -3,6 +3,7 @@
 #include "libcflat.h"
 
 #define memset __builtin_memset
+#define TESTDEV_IO_PORT 0xe0
 
 int fails, tests;
 

@@ -17,6 +18,29 @@ void report(const char *name, int result)
 	}
 }
 
+static char str[] = "abcdefghijklmnop";
+
+void test_stringio()
+{
+	unsigned char r = 0;
+	asm volatile("cld \n\t"
+		     "movw %0, %%dx \n\t"
+		     "rep outsb \n\t"
+		     : : "i"((short)TESTDEV_IO_PORT),
+		       "S"(str), "c"(sizeof(str) - 1));
+	asm volatile("inb %1, %0\n\t" : "=a"(r) : "i"((short)TESTDEV_IO_PORT));
+	report("outsb up", r == str[sizeof(str) - 2]); /* last char */
+
+	asm volatile("std \n\t"
+		     "movw %0, %%dx \n\t"
+		     "rep outsb \n\t"
+		     : : "i"((short)TESTDEV_IO_PORT),
+		       "S"(str + sizeof(str) - 2), "c"(sizeof(str) - 1));
+	asm volatile("cld \n\t" : : );
+	asm volatile("in %1, %0\n\t" : "=a"(r) : "i"((short)TESTDEV_IO_PORT));
+	report("outsb down", r == str[0]);
+}
+
 void test_cmps_one(unsigned char *m1, unsigned char *m3)
 {
 	void *rsi, *rdi;

@@ -93,8 +117,8 @@ void test_cmps(void *mem)
 		m1[i] = m2[i] = m3[i] = i;
 	for (int i = 100; i < 200; ++i)
 		m1[i] = (m3[i] = m2[i] = i) + 1;
-        test_cmps_one(m1, m3);
-        test_cmps_one(m1, m2);
+	test_cmps_one(m1, m3);
+	test_cmps_one(m1, m2);
 }
 
 void test_cr8(void)

@@ -271,7 +295,8 @@ int main()
 
 	test_smsw();
 	test_lmsw();
-        test_ljmp(mem);
+	test_ljmp(mem);
+	test_stringio();
 
 	printf("\nSUMMARY: %d tests, %d failures\n", tests, fails);
 	return fails ? 1 : 0;
kvm/user/test/x86/stringio.S deleted +0 -36
deleted file mode 100644
index 461621c..0000000
@@ -1,36 +0,0 @@
-
-.data
-
-.macro str name, value
-
-\name :	.long 1f-2f
-2:	.ascii "\value"
-1:	
-.endm	
-
-TESTDEV_PORT = 0xf1
-
-	str "forward", "forward"
-	str "backward", "backward"
-		
-.text
-
-.global main
-main:
-	cld
-	movl forward, %ecx
-	lea  4+forward, %rsi
-	movw $TESTDEV_PORT, %dx
-	rep outsb
-
-	std
-	movl backward, %ecx
-	lea 4+backward-1(%rcx), %rsi
-	movw $TESTDEV_PORT, %dx
-	rep outsb
-	
-	mov $0, %rsi
-	call exit
-
-
-
Signature · 1 line
1.6.3.3
Applied
#1 lore raw
Quoted 6 lines · Naphtali Sprei

based on 'next' branch.

Changed test-case stringio into C code and merged into emulator test-case. Removed traces of stringio test-case.

Applied, thanks.

Signature · 1 line
error compiling committee.c: too many arguments to function