ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid
Subsystems (3)
PATCH v2 1/2 ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid
In ppp_input(), PPP_PROTO(skb) may refer to invalid data in the skb.
If this happens and (proto >= 0xc000 || proto = PPP_CCPFRAG) then the packet is passed directly to pppd.
This occurs frequently when using PPPoE with an interface MTU greater than 1500 because the skb is more likely to be non-linear.
The next 2 bytes need to be pulled in ppp_input(). The pull of 2 bytes in ppp_receive_frame() has been removed as it is no longer required.
--- drivers/net/ppp_generic.c | 29 ++++++++++++++++++----------- 1 files changed, 18 insertions(+), 11 deletions(-)
drivers/net/ppp_generic.c +18 -11
@@ -1567,13 +1567,22 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)struct channel *pch = chan->ppp;int proto; -if (!pch || skb->len =0 ) { +if (!pch) {kfree_skb (skb);return ; } - proto =PPP_PROTO (skb);read_lock_bh (&pch->upl); +if (!pskb_may_pull (skb,2 )) { +kfree_skb (skb); +if (pch->ppp) { + ++pch->ppp->dev->stats.rx_length_errors; +ppp_receive_error (pch->ppp); + } + goto done; + } + + proto =PPP_PROTO (skb);if (!pch->ppp || proto >=0xc000 || proto =PPP_CCPFRAG ) {/* put it on the channel queue */ skb_queue_tail (&pch->file.rq, skb);
@@ -1585,6 +1594,8 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) }else {ppp_do_recv (pch->ppp, skb, pch); } + +done:read_unlock_bh (&pch->upl); }
@@ -1617,7 +1628,8 @@ ppp_input_error(struct ppp_channel *chan, int code)static void ppp_receive_frame (struct ppp *ppp,struct sk_buff *skb,struct channel *pch) { -if (pskb_may_pull (skb,2 )) { +/* note: a 0-length skb is used as an error indication */ +if (skb->len >0 ) {#ifdef CONFIG_PPP_MULTILINK /* XXX do channel-level decompression here */ if (PPP_PROTO (skb) =PPP_MP )
@@ -1625,15 +1637,10 @@ ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) else#endif /* CONFIG_PPP_MULTILINK */ ppp_receive_nonmp_frame (ppp, skb); -return ; + }else { +kfree_skb (skb); +ppp_receive_error (ppp); } - -if (skb->len >0 ) -/* note: a 0-length skb is used as an error indication */ - ++ppp->dev->stats.rx_length_errors; - -kfree_skb (skb); -ppp_receive_error (ppp); } static void
Signature · 4 lines
1.7.0.4 -- Simon Arlott
PATCH v2 2/2 ppp_generic: handle non-linear skbs when passing them to pppd
Frequently when using PPPoE with an interface MTU greater than 1500, the skb is likely to be non-linear. If the skb needs to be passed to pppd then the skb data must be read correctly.
The previous commit fixes an issue with accidentally sending skbs to pppd based on an invalid read of the protocol type. When that error occurred pppd was reading invalid skb data too.
--- drivers/net/ppp_generic.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
drivers/net/ppp_generic.c +4 -1
@@ -405,6 +405,7 @@ static ssize_t ppp_read(struct file *file, char __user *buf,DECLARE_WAITQUEUE (wait, current);ssize_t ret;struct sk_buff *skb =NULL ; +struct iovec iov; ret = count;
@@ -448,7 +449,9 @@ static ssize_t ppp_read(struct file *file, char __user *buf,if (skb->len > count) goto outf; ret = -EFAULT ; -if (copy_to_user (buf, skb->data, skb->len)) + iov.iov_base = buf; + iov.iov_len = count; +if (skb_copy_datagram_iovec (skb,0 , &iov, skb->len)) goto outf; ret = skb->len;
Signature · 4 lines
1.7.0.4 -- Simon Arlott
Re: [PATCH v2 2/2] ppp_generic: handle non-linear skbs when passing them to pppd
From: Simon Arlott <[email protected]>
Date: Mon, 03 May 2010 21:20:27 +0100
Quoted 9 lines
Frequently when using PPPoE with an interface MTU greater than 1500, the skb is likely to be non-linear. If the skb needs to be passed to pppd then the skb data must be read correctly.
The previous commit fixes an issue with accidentally sending skbs to pppd based on an invalid read of the protocol type. When that error occurred pppd was reading invalid skb data too.
Signed-off-by Simon Arlott <[email protected]>
Applied.
From: Simon Arlott <[email protected]>
Date: Mon, 03 May 2010 21:19:33 +0100
Quoted 5 lines
In
ppp_input(),PPP_PROTO(skb)may refer to invalid data in the skb.If this happens and (proto >=
0xc000|| proto =PPP_CCPFRAG) then the packet is passed directly to pppd.
Quoted 8 lines
This occurs frequently when using PPPoE with an interface MTU greater than 1500 because the skb is more likely to be non-linear.
The next 2 bytes need to be pulled in
ppp_input(). The pull of 2 bytes inppp_receive_frame()has been removed as it is no longer required.Signed-off-by Simon Arlott <[email protected]>
Applied.