u-boot prompt on serial over usb console ttyACM0
Hi,
I've serial over usb support for my board which is using usbtty class driver in u-boot.
When I load this u-boot on my board, after enumeration is done, it creates /dev/ttyACM0 on host. Now when I start another serial terminal with /dev/ttyACM0 it initialize the terminal but u-boot does not give any prompt (i.e. it does not display anything except terminal initialization).
I am using minicom as console terminal.
Also after enumeration is done, I do #setenv stdout 'usbtty' as well.
Any help in this regard would be really helpful.
Am I missing in configuring any thing in u-boot??
Thanks,
Sumit