elantech: Report multitouch with proper ABS_MT messages
Subsystems (2)
PATCH v2 2/2 elantech: Report multitouch with proper ABS_MT messages
Multitouch info was reported only via a old protocol used by the proprietary X driver from elantech. Let's report the multitouch info also following the official MT protocol.
This was done following the multi-touch-protocol.txt documentation, and inspired by the bcm5974 implementation. Testing was light as there is not many applications using this protocol yet, but the X synaptics driver didn't complain and the X multitouch driver behaved correctly.
--- drivers/input/mouse/elantech.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-)
drivers/input/mouse/elantech.c +13 -0
@@ -278,6 +278,10 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)* byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ y1 =ETP_YMAX_V2 - (((packet[4 ] &0x03 ) <<8 ) | packet[5 ]); +input_report_abs (dev,ABS_MT_POSITION_X , x1); +input_report_abs (dev,ABS_MT_POSITION_Y , y1); +input_mt_sync (dev); +input_report_abs (dev,ABS_TOOL_WIDTH , width);input_report_abs (dev,ABS_X , x1);input_report_abs (dev,ABS_Y , y1);
@@ -300,6 +304,13 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) x2 = ((packet[3 ] &0x10 ) <<4 ) | packet[4 ];/* byte 5: by7 by6 by5 by4 by3 by2 by1 by0 */ y2 =ETP_2FT_YMAX - (((packet[3 ] &0x20 ) <<3 ) | packet[5 ]); +/* Multitouch */ +input_report_abs (dev,ABS_MT_POSITION_X , x1 <<2 ); +input_report_abs (dev,ABS_MT_POSITION_Y , y1 <<2 ); +input_mt_sync (dev); +input_report_abs (dev,ABS_MT_POSITION_X , x2 <<2 ); +input_report_abs (dev,ABS_MT_POSITION_Y , y2 <<2 ); +input_mt_sync (dev);/* * For compatibility with the X Synaptics driver scale up * one coordinate and report as ordinary mouse movent
@@ -484,6 +495,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)input_set_abs_params (dev,ABS_TOOL_WIDTH ,ETP_WMIN_V2 ,ETP_WMAX_V2 ,0 ,0 );input_set_abs_params (dev,ABS_X ,ETP_XMIN_V2 ,ETP_XMAX_V2 ,0 ,0 );input_set_abs_params (dev,ABS_Y ,ETP_YMIN_V2 ,ETP_YMAX_V2 ,0 ,0 ); +input_set_abs_params (dev,ABS_MT_POSITION_X ,ETP_XMIN_V2 ,ETP_XMAX_V2 ,0 ,0 ); +input_set_abs_params (dev,ABS_MT_POSITION_Y ,ETP_YMIN_V2 ,ETP_YMAX_V2 ,0 ,0 );input_set_abs_params (dev,ABS_HAT0X ,ETP_2FT_XMIN ,ETP_2FT_XMAX ,0 ,0 );input_set_abs_params (dev,ABS_HAT0Y ,ETP_2FT_YMIN ,ETP_2FT_YMAX ,0 ,0 );input_set_abs_params (dev,ABS_HAT1X ,ETP_2FT_XMIN ,ETP_2FT_XMAX ,0 ,0 );
Signature · 7 lines
1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Here is an updated version of the patch. It is identical to the previous version but rediff'd against the lastest version of patch 1.
Eric
8<-------------------------------------------------------
Multitouch info was reported only via a old protocol used by the proprietary X driver from elantech. Let's report the multitouch info also following the official MT protocol.
This was done following the multi-touch-protocol.txt documentation, and inspired by the bcm5974 implementation. Testing was light as there is not many applications using this protocol yet, but the X synaptics driver didn't complain and the X multitouch driver behaved correctly.
--- drivers/input/mouse/elantech.c | 24 +++++++++++++++++++----- 1 files changed, 19 insertions(+), 5 deletions(-)
drivers/input/mouse/elantech.c +19 -5
@@ -271,15 +271,20 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)* byte 3: . . w1 w0 . . . . */ width = ((packet[1 ] &0xf0 ) >>2 ) | ((packet[3 ] &0x30 ) >>4 ); -input_report_abs (dev,ABS_TOOL_WIDTH , width); -input_report_abs (dev,ABS_X , - ((packet[1 ] &0x07 ) <<8 ) | packet[2 ]); + x1 = ((packet[1 ] &0x07 ) <<8 ) | packet[2 ];/* * byte 4: . . . . . . y9 y8 * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ -input_report_abs (dev,ABS_Y , -ETP_YMAX_V2 - (((packet[4 ] &0x03 ) <<8 ) | packet[5 ])); + y1 =ETP_YMAX_V2 - (((packet[4 ] &0x03 ) <<8 ) | packet[5 ]); +/* Multitouch */ +input_report_abs (dev,ABS_MT_POSITION_X , x1); +input_report_abs (dev,ABS_MT_POSITION_Y , y1); +input_mt_sync (dev); + +input_report_abs (dev,ABS_TOOL_WIDTH , width); +input_report_abs (dev,ABS_X , x1); +input_report_abs (dev,ABS_Y , y1);break ;case 2 :
@@ -299,6 +304,13 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse) x2 = ((packet[3 ] &0x10 ) <<4 ) | packet[4 ];/* byte 5: by7 by6 by5 by4 by3 by2 by1 by0 */ y2 =ETP_2FT_YMAX - (((packet[3 ] &0x20 ) <<3 ) | packet[5 ]); +/* Multitouch */ +input_report_abs (dev,ABS_MT_POSITION_X , x1 <<2 ); +input_report_abs (dev,ABS_MT_POSITION_Y , y1 <<2 ); +input_mt_sync (dev); +input_report_abs (dev,ABS_MT_POSITION_X , x2 <<2 ); +input_report_abs (dev,ABS_MT_POSITION_Y , y2 <<2 ); +input_mt_sync (dev);/* * For compatibility with the X Synaptics driver scale up * one coordinate and report as ordinary mouse movent
@@ -483,6 +495,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)input_set_abs_params (dev,ABS_TOOL_WIDTH ,ETP_WMIN_V2 ,ETP_WMAX_V2 ,0 ,0 );input_set_abs_params (dev,ABS_X ,ETP_XMIN_V2 ,ETP_XMAX_V2 ,0 ,0 );input_set_abs_params (dev,ABS_Y ,ETP_YMIN_V2 ,ETP_YMAX_V2 ,0 ,0 ); +input_set_abs_params (dev,ABS_MT_POSITION_X ,ETP_XMIN_V2 ,ETP_XMAX_V2 ,0 ,0 ); +input_set_abs_params (dev,ABS_MT_POSITION_Y ,ETP_YMIN_V2 ,ETP_YMAX_V2 ,0 ,0 );input_set_abs_params (dev,ABS_HAT0X ,ETP_2FT_XMIN ,ETP_2FT_XMAX ,0 ,0 );input_set_abs_params (dev,ABS_HAT0Y ,ETP_2FT_YMIN ,ETP_2FT_YMAX ,0 ,0 );input_set_abs_params (dev,ABS_HAT1X ,ETP_2FT_XMIN ,ETP_2FT_XMAX ,0 ,0 );
Signature · 7 lines
1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi again Éric,
thanks for your changes, the first patch looks better now. However, both patches still have style problems. Also, the second patch now makes unrelated changes to the ABS_X etc, so it is difficult to even know what was tested, and whether the first patch really works as claimed.
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Op 10-05-10 22:53, Henrik Rydberg schreef:
Quoted 6 lines
Hi again Éric,
thanks for your changes, the first patch looks better now. However, both patches still have style problems. Also, the second patch now makes unrelated changes to the
ABS_Xetc, so it is difficult to even know what was tested, and whether the first patch really works as claimed.
What are the style problems of the first patch? I tried to fix all of them.
Concerning the second patch, it's necessary to change the lines with ABS_X, because otherwise the computation would be duplicated for the MT part and it would make everything look more complicated. Honestly, I think this change is still very limited and can easily be reviewed for not changing the semantic. Well, I think it would be a bit overkill, but if really considered necessary, I can do a third intermediary patch... Dmitry let me know if you can merge the patch as is.
Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 8 lines · Éric Piel
Op 10-05-10 22:53, Henrik Rydberg schreef:
Quoted 6 lines
Hi again Éric,
thanks for your changes, the first patch looks better now. However, both patches still have style problems. Also, the second patch now makes unrelated changes to the
ABS_Xetc, so it is difficult to even know what was tested, and whether the first patch really works as claimed.What are the style problems of the first patch? I tried to fix all of them.
WARNING: line over 80 characters
#212: FILE: drivers/input/mouse/elantech.c:483:
+ input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0);
WARNING: line over 80 characters
#119: FILE: drivers/input/mouse/elantech.c:498:
+ input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
WARNING: line over 80 characters
#120: FILE: drivers/input/mouse/elantech.c:499:
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
Quoted 6 lines
Concerning the second patch, it's necessary to change the lines with
ABS_X, because otherwise the computation would be duplicated for the MT part and it would make everything look more complicated. Honestly, I think this change is still very limited and can easily be reviewed for not changing the semantic.
Yes, you are right about x1 and y1. The patch patch touches the width variable for no apparent reason, and I stopped reading there.
If this process seems trivial and tedious to you, consider how it must appear to those who deal with patches every day. Most people will not even look at a patch with style problems, so the real review _starts_ when those issues are fixed.
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Dmitry Torokhov
maintainerQuoted 21 lines · Henrik Rydberg
Quoted 8 lines · Éric Piel
Op 10-05-10 22:53, Henrik Rydberg schreef:
Quoted 6 lines
Hi again Éric,
thanks for your changes, the first patch looks better now. However, both patches still have style problems. Also, the second patch now makes unrelated changes to the
ABS_Xetc, so it is difficult to even know what was tested, and whether the first patch really works as claimed.What are the style problems of the first patch? I tried to fix all of them.
WARNING: line over 80 characters
#212: FILE:drivers/input/mouse/elantech.c:483:(quoted diff) +1
-0+ input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0);WARNING: line over 80 characters
#119: FILE:drivers/input/mouse/elantech.c:498:drivers/input/mouse/elantech.c +1
-0+input_set_abs_params (dev,ABS_MT_POSITION_X ,ETP_XMIN_V2 ,ETP_XMAX_V2 ,0 ,0 );WARNING: line over 80 characters
#120: FILE:drivers/input/mouse/elantech.c:499:
drivers/input/mouse/elantech.c static void elantech_set_input_params(struct psmouse *psmouse) · line 499
Quoted 1 line
drivers/input/mouse/elantech.c +1
-0+input_set_abs_params (dev,ABS_MT_POSITION_Y ,ETP_YMIN_V2 ,ETP_YMAX_V2 ,0 ,0 );
Do not worry about the 80 char limit that much, especially if it produces less readable code due to wierd line splits. The code above could be broken cleanly, but it's not a big deal.
The rest of the checkpatch warnirngs (if any) I prefer to have addressed though.
Quoted 15 lines
Quoted 6 lines
Concerning the second patch, it's necessary to change the lines with
ABS_X, because otherwise the computation would be duplicated for the MT part and it would make everything look more complicated. Honestly, I think this change is still very limited and can easily be reviewed for not changing the semantic.Yes, you are right about x1 and y1. The patch patch touches the width variable for no apparent reason, and I stopped reading there.
If this process seems trivial and tedious to you, consider how it must appear to those who deal with patches every day. Most people will not even look at a patch with style problems, so the real review _starts_ when those issues are fixed.
Henrik
Signature · 5 lines
Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 6 lines · Dmitry Torokhov
Do not worry about the 80 char limit that much, especially if it produces less readable code due to wierd line splits. The code above could be broken cleanly, but it's not a big deal.
The rest of the checkpatch warnirngs (if any) I prefer to have addressed though.
Fair enough, ACK on the content of both patches, and thanks Eric for your patience.
Henrik