Skip to contentSkip to conversation

Pull Request for imx

U-Boot Applied Stefano Babic 2 participants 2 messages May 19, 2010 – May 21, 2010

lore
Share & tools
lore
#0 lore raw

Wolfgang,

could you pull u-boot-imx in the time Tom is not available ? Tom has already merged most of the patches in u-boot-arm, I resend you the pull-request for completeness:

The following changes since commit ab92d0fd9abd0d4726878a80c6baf3a0f94770b8:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

are available in the git repository at:

git://git.denx.de/u-boot-imx master

Anatolij Gustschin (1):
tx25: fix crash while booting Linux

Fabio Estevam (1):
MX51: Fix MX51 CPU detect message

Magnus Lilja (1):
i.MX31: Activate NAND support for i.MX31 Litekit board.

Stefano Babic (8):
MX51evk: Removed warnings
MX: Added Freescale Power Management Driver
MX: RTC13783 uses general function to access PMIC
MX31: Add support for PMIC to the QONG module
SPI: added support for MX51 to mxc_spi
MX: Added definition file for MC13892
Add SPI support to mx51evk board
MX31: Added support for the Casio COM57H5M10XRC to QONG

 arch/arm/cpu/arm_cortexa8/mx51/soc.c |    2 +-
 board/davedenx/qong/qong.c           |   20 +++
 board/freescale/mx51evk/mx51evk.c    |  143 +++++++++++++++++++++-
 board/karo/tx25/tx25.c               |    3 +
 drivers/misc/Makefile                |    1 +
 drivers/misc/fsl_pmic.c              |  200 +++++++++++++++++++++++++++++
 drivers/rtc/mc13783-rtc.c            |   72 +++---------
 drivers/spi/mxc_spi.c                |  231
+++++++++++++++++++++++++++++++---
 drivers/video/mx3fb.c                |   47 +++++---
 include/configs/imx31_litekit.h      |   19 +++-
 include/configs/mx31ads.h            |    8 +-
 include/configs/mx31pdk.h            |    9 +-
 include/configs/mx51evk.h            |   15 +++
 include/configs/qong.h               |   16 +++-
 include/fsl_pmic.h                   |  128 +++++++++++++++++++
 include/mc13892.h                    |  160 +++++++++++++++++++++++
 16 files changed, 967 insertions(+), 107 deletions(-)
 create mode 100644 drivers/misc/fsl_pmic.c
 create mode 100644 include/fsl_pmic.h
 create mode 100644 include/mc13892.h

Thanks,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#1 lore raw

Dear Stefano Babic,

Quoted 46 lines · In message <[email protected]> you wrote:

Wolfgang,

could you pull u-boot-imx in the time Tom is not available ? Tom has already merged most of the patches in u-boot-arm, I resend you the pull-request for completeness:

The following changes since commit ab92d0fd9abd0d4726878a80c6baf3a0f94770b8:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

are available in the git repository at:

git://git.denx.de/u-boot-imx master

Anatolij Gustschin (1):
tx25: fix crash while booting Linux

Fabio Estevam (1):
MX51: Fix MX51 CPU detect message

Magnus Lilja (1):
i.MX31: Activate NAND support for i.MX31 Litekit board.

Stefano Babic (8):
MX51evk: Removed warnings
MX: Added Freescale Power Management Driver
MX: RTC13783 uses general function to access PMIC
MX31: Add support for PMIC to the QONG module
SPI: added support for MX51 to mxc_spi
MX: Added definition file for MC13892
Add SPI support to mx51evk board
MX31: Added support for the Casio COM57H5M10XRC to QONG

 arch/arm/cpu/arm_cortexa8/mx51/soc.c |    2 +-
 board/davedenx/qong/qong.c           |   20 +++
 board/freescale/mx51evk/mx51evk.c    |  143 +++++++++++++++++++++-
 board/karo/tx25/tx25.c               |    3 +
 drivers/misc/Makefile                |    1 +
 drivers/misc/fsl_pmic.c              |  200 +++++++++++++++++++++++++++++
 drivers/rtc/mc13783-rtc.c            |   72 +++---------
 drivers/spi/mxc_spi.c                |  231
+++++++++++++++++++++++++++++++---
 drivers/video/mx3fb.c                |   47 +++++---
 include/configs/imx31_litekit.h      |   19 +++-
 include/configs/mx31ads.h            |    8 +-
 include/configs/mx31pdk.h            |    9 +-
Quoted 8 lines
 include/configs/mx51evk.h            |   15 +++
 include/configs/qong.h               |   16 +++-
 include/fsl_pmic.h                   |  128 +++++++++++++++++++
 include/mc13892.h                    |  160 +++++++++++++++++++++++
 16 files changed, 967 insertions(+), 107 deletions(-)
 create mode 100644 drivers/misc/fsl_pmic.c
 create mode 100644 include/fsl_pmic.h
 create mode 100644 include/mc13892.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Writing a book is like washing an elephant: there's no good place  to
begin  or  end,  and  it's  hard to keep track of what you've already
covered.