Skip to contentSkip to conversation

NAND write issue is DM355

U-Boot Mohamed Thalib H 1 participant 1 message May 21, 2010

lore
Share & tools
lore
#0 lore raw

Hi all,

I am porting u-boot to TI DM355 based board.

When I write to nand using nand write command upto offset of 0x60000 it is working fine. but If I write above 0x70000 it is writing to 0x0 address. Can some one give me suggestion how to correct this issue.

NAND size 64M

Signature · 2 lines
Best Regards,
Mohamed Thalib H