Skip to contentSkip to conversation

Mystique SaTiX-S2 V2 CI Dual & Mystique CI Interface f. Mystique SaTiX-S2 Dual

DISCUSSION Ronald Flou 2 participants 2 messages May 22, 2010 – May 23, 2010 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hallo,

I own the following cards:
Mystique SaTiX-S2 V2 CI Dual
Mystique CI Interface f. Mystique SaTiX-S2 Dual

The Mystique SaTiX-S2 V2 CI Dual is working following the instructions
on http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual
and http://www.vdr-portal.de/board/thread.php?threadid=93616&hilight=Mystique+SaTiX+S2+Dual

The Mystique CI Interface f. Mystique SaTiX-S2 Dual isn't being recognized. Both are connected directly to each other.
I even tested with the ci-interface connected, using the pcie bridge, directly to the motherboard. It only see the nGene pcie bridge but nothing else.

If I can help in some way with testing the hardware, please let me know. I will not be a great help in programming, but I will help in any way I can.

Greetings,
Ronald.

#1 lore raw
Quoted 12 lines · Ronald Flou

Hallo,

I own the following cards:
Mystique SaTiX-S2 V2 CI Dual
Mystique CI Interface f. Mystique SaTiX-S2 Dual

The Mystique SaTiX-S2 V2 CI Dual is working following the instructions
on http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual
and http://www.vdr-portal.de/board/thread.php?threadid=93616&hilight=Mystique+SaTiX+S2+Dual

Quoted 8 lines

The Mystique CI Interface f. Mystique SaTiX-S2 Dual isn't being recognized. Both are connected directly to each other.
I even tested with the ci-interface connected, using the pcie bridge, directly to the motherboard. It only see the nGene pcie bridge but nothing else.

If I can help in some way with testing the hardware, please let me know. I will not be a great help in programming, but I will help in any way I can.

Just to add a "me too", or almost: I want to buy a DVB-S2 with high symbol-rates capabilities for DVB-S2 (up to 45MS/s reliably) AND CI support. SO I guess this one or the single tuner version could be great, and I can help for debugging once I know something is in the works. TIA
Bye
Manu