Skip to contentSkip to conversation

Troubles doing transparent proxy for virtual machines

DISCUSSION Dan Higgins 1 participant 1 message May 27, 2010

lore
Share & tools
lore
#0 lore raw

Hi iptables gurus. First here is the basic topology:

Internet

     |
  Gateway
     |

Workstation---eth0---virbr0
|
+-----+-----+
| | |
vm1 vm2 vm3

I need to test a traffic analyzer running on my workstation, listening on some port (say 8990) on eth0.

The rule [I think] I want is "any packets leaving virbr0 going anywhere to port 80 must instead go to port 8990 on eth0". My software running on port 8990 does its own check of the NAT packet mangling to push the packets through after it inspects them.

I've been banging my head on this, with different variants of:

iptables -t nat -A PREROUTING -i virbr0 -p tcp --dport 80 -j DNAT \
    --to 10.0.0.10:8990

And I've tried the more generic method of using the mangle table with --set-mark and ip rule add fwmark, but I'm not getting it.

I guess what's confusing me is that everything runs on the same box.

Thanks for any guidance,
Dan