Skip to contentSkip to conversation

MIPS 24Kc

DISCUSSION Ireneusz Szcześniak 2 participants 3 messages Jun 1, 2010 – Jun 2, 2010 MIPS

lore
Share & tools
lore

Ireneusz Szcześniak

author
#0 lore raw

Hi,

I'm writing to inquire about the status of the support for MIPS 24Kc.

I have a RouterBOARD 433 that has the Atheros AR7130 processor with the MIPS 24Kc core. I would like to compile my kernel with the KGDB enabled, so that I can debug the kernel on the live hardware.

Thanks,
Irek

Signature · 2 lines
Ireneusz (Irek) Szczesniak
http://www.irkos.org
#1 lore raw

Hi,

Quoted 7 lines · Ireneusz Szcześniak

Hi,

I'm writing to inquire about the status of the support for MIPS 24Kc.

I have a RouterBOARD 433 that has the Atheros AR7130 processor with the MIPS 24Kc core. I would like to compile my kernel with the KGDB enabled, so that I can debug the kernel on the live hardware.

I would recommend checking OpenWr's ar71xx port[1] which supports RB433.

[1]: https://dev.openwrt.org/browser/trunk/target/linux/ar71xx
--
Florian

author
#2 lore raw

Hi,

Quoted 3 lines

I would recommend checking OpenWr's ar71xx port[1] which supports RB433.

[1]: https://dev.openwrt.org/browser/trunk/target/linux/ar71xx

Thanks for the information. A few weeks ago I downloaded the most recent Kamikaze release (8.09.2), and I didn't get the option of KGDB for ar71xx, and so I didn't use it. But now that I checked out the trunk, that you point out, I was able to built OpenWRT with the KGDB support! That's cool!

Best,
Irek

Signature · 2 lines
Ireneusz (Irek) Szczesniak
http://www.irkos.org