Skip to contentSkip to conversation

serial: add support for various Titan PCI cards

PATCH Superseded Yegor Yefremov 2 participants 3 messages Jun 2, 2010 – Jun 4, 2010

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 serial: add support for various Titan PCI cards

serial: add support for various Titan PCI cards

Models: 200I, 400I, 800I, 400EH, 800EH, 800EHB,

        100E, 200E, 400E, 800E, 200EI, 200EISI
drivers/serial/8250_pci.c +59 -0
Index: b/drivers/serial/8250_pci.c
===================================================================
@@ -1541,6 +1541,10 @@
 	pbn_b3_4_115200,
 	pbn_b3_8_115200,
 
+	pbn_b4_bt_2_921600,
+	pbn_b4_bt_4_921600,
+	pbn_b4_bt_8_921600,
+
 	/*
 	 * Board-specific versions.
 	 */
@@ -1995,6 +1999,25 @@
 		.uart_offset	= 8,
 	},
 
+	[pbn_b4_bt_2_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_4_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_8_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
 	/*
 	 * Entries following this are board-specific.
 	 */
@@ -3043,6 +3066,42 @@
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_2_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
 
 	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
include/linux/pci_ids.h +12 -0
Index: b/include/linux/pci_ids.h
===================================================================
@@ -2021,6 +2021,18 @@
 #define PCI_DEVICE_ID_TITAN_200		0xA005
 #define PCI_DEVICE_ID_TITAN_400		0xA003
 #define PCI_DEVICE_ID_TITAN_800B	0xA004
+#define PCI_DEVICE_ID_TITAN_200I	0x8028
+#define PCI_DEVICE_ID_TITAN_400I	0x8048
+#define PCI_DEVICE_ID_TITAN_800I	0x8088
+#define PCI_DEVICE_ID_TITAN_800EH	0xA007
+#define PCI_DEVICE_ID_TITAN_800EHB	0xA008
+#define PCI_DEVICE_ID_TITAN_400EH	0xA009
+#define PCI_DEVICE_ID_TITAN_100E	0xA010
+#define PCI_DEVICE_ID_TITAN_200E	0xA012
+#define PCI_DEVICE_ID_TITAN_400E	0xA013
+#define PCI_DEVICE_ID_TITAN_800E	0xA014
+#define PCI_DEVICE_ID_TITAN_200EI	0xA016
+#define PCI_DEVICE_ID_TITAN_200EISI	0xA017
 
 #define PCI_VENDOR_ID_PANACOM		0x14d4
 #define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
#1 lore raw
Quoted 1 line · Yegor Yefremov

Index: b/include/linux/pci_ids.h

If you look at the top of this file, it says we are not adding new entries to it except for ids that are in more than one file.

So, care to redo this patch without touching this file? I'll be glad to take it that way.

thanks,

greg k-h

#2 lore raw
Quoted 8 lines · Greg KH
Quoted 1 line · Yegor Yefremov

Index: b/include/linux/pci_ids.h

If you look at the top of this file, it says we are not adding new entries to it except for ids that are in more than one file.

So, care to redo this patch without touching this file? I'll be glad to take it that way.

O.K. I've pasted the IDs into 8250_pci.c. I hope the section "This should be in linux/pci_ids.h" is O.K.

Regards,
Yegor