Skip to contentSkip to conversation

stuck in 1024x768

i845G Felix Miata 2 participants 3 messages Jun 13, 2010 – Jun 14, 2010 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Using openSUSE 11.3M7 (1.8.0 server/2.11.0 AFAICT) I've been unable to figure out how to get the server to obey xorg.conf entries for NoDDC, NoRandr, PreferredMode or DisplaySize. Is it no longer possible to get my choice of resolution and DPI without reverting to one of the older X/driver versions that was perfectly happy to do 2048x1536 on whatever size display (IOW, whatever DPI I desire) I set it to use (and without _any_ modeline entries in xorg.conf)?

Must I use /etc/X11/xorg.conf.d entries instead? If so, where are the HOWTO and valid entries catalog located?

xorg.conf.new created by 'X -configure':
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.conf.new-t2240-os113-20100613a

xorg.conf as last modified by me:
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.conf-t2240-s113-20100613a

Xorg.0.log from last use of above xorg.conf:
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-t2240-s113-20100613a

Note: My display produces neither valid EDID nor valid DDC.

Signature · 6 lines
"The wise are known for their understanding, and pleasant
words are persuasive." Proverbs 16:21 (New Living Translation)

 Team OS/2 ** Reg. Linux User #211409

Felix Miata  ***  http://fm.no-ip.com/
#2 lore raw
In reply to a message not in the archive

On 2010/06/13 23:10 (GMT+0100) Andy Lutomirski composed:

Quoted 25 lines · Felix Miata
Quoted 23 lines

Using openSUSE 11.3M7 (1.8.0 server/2.11.0 AFAICT) I've been unable to figure
out how to get the server to obey xorg.conf entries for NoDDC, NoRandr,
PreferredMode or DisplaySize. Is it no longer possible to get my choice of
resolution and DPI without reverting to one of the older X/driver versions
that was perfectly happy to do 2048x1536 on whatever size display (IOW,
whatever DPI I desire) I set it to use (and without _any_ modeline entries in
xorg.conf)?

Must I use /etc/X11/xorg.conf.d entries instead? If so, where are the HOWTO and valid entries catalog located?

xorg.conf.new created by 'X -configure':
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.conf.new-t2240-os113-20100613a

xorg.conf as last modified by me:
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.conf-t2240-s113-20100613a

Quoted 6 lines
Quoted 4 lines

Xorg.0.log from last use of above xorg.conf:
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-t2240-s113-20100613a

Note: My display produces neither valid EDID nor valid DDC.

Do xrandr --newmode and xrandr --addmode not work?

Not so far. 'xrandr' & 'xrandr -q' can't open display. xrandr --help scrolls off the screen. 'xrandr --newmode cvt 1600 1200' produces syntax message.
http://linux.die.net/man/1/xrandr shows only terse syntax with no examples. Google produced its usual zillion unhelpful hits, mostly about configuring multiple displays. This and more is why I inquired here.

With xorg.conf as recently as last fall, no command line understanding was required, only following any of many widely available instruction examples, from which when correctly followed, X simply obeyed, _starting_up_ in the desired mode, doing automatically whatever it is that now requires output from gtf or cvt run separately beforehand.

Just as importantly, I've not yet figured out why anyone should have to do manually (presuming they can even figure out how) what used to work automatically. For years, no modelines were in xorg.conf were required, and X just used the first usable entry on the applicable modes line in 'Section "Screen"'. Later someone decided a PreferredMode entry in 'Section "Monitor"' was required to perform the same function, but now it no longer works.

Supposedly the overhaul of X begun two years ago was to make operation/startup/configuration (?more?) automatic, not less, but I, always using Trinitron CRTs, have only observed quite the contrary so far. X for me has regressed from the jet age back to piston engined biplanes without electric starters.

Signature · 6 lines
"The wise are known for their understanding, and pleasant
words are persuasive." Proverbs 16:21 (New Living Translation)

 Team OS/2 ** Reg. Linux User #211409

Felix Miata  ***  http://fm.no-ip.com/
#3 lore raw
Quoted 9 lines · On 2010-06-13 19:13-0400 Felix Miata wrote:

On 2010/06/13 23:10 (GMT+0100) Andy Lutomirski composed:

Quoted 7 lines · Felix Miata
Quoted 6 lines

Using openSUSE 11.3M7 (1.8.0 server/2.11.0 AFAICT) I've been unable to figure
out how to get the server to obey xorg.conf entries for NoDDC, NoRandr,
PreferredMode or DisplaySize.

[...]

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

xorg.conf as last modified by me:
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.conf-t2240-s113-20100613a

Hi Felix:

Here is how I configured PreferredMode _for an old server_ (Debian Lenny) in the Monitor section:

#gtf 1024 768 85
# 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync + Vsync Option "PreferredMode" "1024x768_85.00"

I found in the past that PreferredMode would not work with Intel if you used a standard modeline name such as "PreferredMode" "1600x1200" like you do in your xorg.conf. Instead, I suggest you use gtf to calculate a 1600x1200 modeline, and use the generated non-standard modeline name with a suffix corresponding to the vertical refresh rate. No guarantees, but specifying a special modeline like above with a non-standard modeline name was the only way I could get PreferredMode to work in the past, and it is possible those constraints on PreferredMode still apply for modern X servers. Anyhow, it is worth a try.

Quoted 7 lines

Just as importantly, I've not yet figured out why anyone should have to do manually (presuming they can even figure out how) what used to work automatically. For years, no modelines were in xorg.conf were required, and X just used the first usable entry on the applicable modes line in 'Section "Screen"'. Later someone decided a PreferredMode entry in 'Section "Monitor"' was required to perform the same function, but now it no longer works.

Quoted 5 lines

Supposedly the overhaul of X begun two years ago was to make operation/startup/configuration (?more?) automatic, not less, but I, always using Trinitron CRTs, have only observed quite the contrary so far. X for me has regressed from the jet age back to piston engined biplanes without electric starters.

Like you, I hope the Intel jet age comes back soon.

By the way, my 15-year old Trinitron finally gave up the ghost earlier this year and I replaced it with an LED-backlit ASUS LCD for $130. That was a superb deal, and I can say that new monitor is better in all respects (brightness, colours, resolution, and size) except for width of viewing angle. However, I doubt very much it will last as long as Trinitrons do; the Trinitrons are not that much worse in quality; and "use it up, wear it out" philosophy helps the environment (and the bank balance). Thus, I am hanging on to my remaining 10-yr old Trinitron monitor until it also dies. That particular monitor is attached to a computer with SIS video chipset (ugh), but when that computer fails I won't replace it with Intel unless PreferredMode works properly. So I hope my suggestion above works for you, but if not, I hope the Intel developers get PreferredMode working properly again.

Alan
__________________________
Alan W. Irwin

Astronomical research affiliation with Department of Physics and Astronomy, University of Victoria (astrowww.phys.uvic.ca).

Programming affiliations with the FreeEOS equation-of-state implementation for stellar interiors (freeeos.sf.net); PLplot scientific plotting software package (plplot.org); the libLASi project (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project (lbproject.sf.net).
__________________________

Linux-powered Science
__________________________