creating RAID-1 - in which direction will the sync be made?
In which direction will the devices be synchronized, if I create a new RAID-1 array with an external bitmap?
Assuming I use this command line:
mdadm --create /dev/md11 --level=1 --bitmap=/mnt/src/bitmap --raid-devices 2 /dev/storage/origin /dev/esata/copy
Should I expect /dev/storage/origin being written to /dev/esata/copy?
Or perhaps, /dev/esata/copy will be written onto /dev/storage/origin?
I couldn't find it explained in the fine manual, so perhaps creating an array with a missing device:
mdadm --create /dev/md11 --level=1 --bitmap=/mnt/src/bitmap --raid-devices 2 /dev/storage/origin missing
and adding a second device later will be safer...
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 11 lines · Tomasz Chmielewski
In which direction will the devices be synchronized, if I create a new RAID-1 array with an external bitmap?
Assuming I use this command line:
mdadm --create
/dev/md11--level=1 --bitmap=/mnt/src/bitmap --raid-devices 2/dev/storage/origin/dev/esata/copyShould I expect
/dev/storage/originbeing written to/dev/esata/copy?
Quoted 8 lines
Or perhaps,
/dev/esata/copywill be written onto/dev/storage/origin?I couldn't find it explained in the fine manual, so perhaps creating an array with a missing device:
mdadm --create
/dev/md11--level=1 --bitmap=/mnt/src/bitmap --raid-devices 2/dev/storage/originmissingand adding a second device later will be safer...
Looks like the first device in the command line will be synced onto the second. However, I'd like someone to confirm this.
And that I should use "build" to sync the devices, otherwise, I'll write a superblock on each of them ;)
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 17 lines · On Wed, 14 Jul 2010 15:48:39 +0200 Tomasz Chmielewski <[email protected]> wrote:
Quoted 16 lines · Tomasz Chmielewski
In which direction will the devices be synchronized, if I create a new RAID-1 array with an external bitmap?
Assuming I use this command line:
mdadm --create
/dev/md11--level=1 --bitmap=/mnt/src/bitmap --raid-devices 2/dev/storage/origin/dev/esata/copyShould I expect
/dev/storage/originbeing written to/dev/esata/copy?Or perhaps,
/dev/esata/copywill be written onto/dev/storage/origin?I couldn't find it explained in the fine manual, so perhaps creating an array with a missing device:
Quoted 7 lines
Quoted 3 lines
mdadm --create
/dev/md11--level=1 --bitmap=/mnt/src/bitmap --raid-devices 2/dev/storage/originmissingand adding a second device later will be safer...
Looks like the first device in the command line will be synced onto the second.
However, I'd like someone to confirm this.
If it matter to you, then you are doing the wrong thing.
If you have data on one device and want to copy it to the other device, then you should - as you suggest - create the array with the 'origin' device and 'missing', then add the 'copy' device as a spare - it will rebuild
Quoted 5 lines
And that I should use "build" to sync the devices, otherwise, I'll write a superblock on each of them ;)
Possibly. But you then need to keep track of which devices is up-to-date, and md has no metadata area to record this information in.
If you were to explain the big picture of what you were trying to do, I/we might be able to be more specific in answers.
NeilBrown