Skip to contentSkip to conversation

8xx, kup4: add FDT support

PATCH New Heiko Schocher 2 participants 2 messages Jul 19, 2010 – Aug 8, 2010

lore
Share & tools
lore

Heiko Schocher

author
#0 lore raw

PATCH v3 2/2 8xx, kup4: add FDT support

Signed-off-by Heiko Schocher <[email protected]>

---
- changes since v1
- rebased against current mainline
- fix printf output

- changes since v2
added comments from Scott Wood
removed ft_blob_update() complete, because fixups are done in cpu specific code.

 board/kup/kup4k/kup4k.c |   11 +++++++++++
 include/configs/KUP4K.h |    4 ++++
 2 files changed, 15 insertions(+), 0 deletions(-)
board/kup/kup4k/kup4k.c +11 -0
index 7eb36ab..267821c 100644
@@ -24,6 +24,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <libfdt.h>
 #include <mpc8xx.h>
 #include <hwconfig.h>
 #include <i2c.h>

@@ -291,3 +292,13 @@ static unsigned char swapbyte(unsigned char c)
 	}
 	return result;
 }
+
+/*
+ * Device Tree Support
+ */
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
include/configs/KUP4K.h +4 -0
index ab708ae..14d412d 100644
@@ -510,5 +510,9 @@
 #define CONFIG_SYS_DEVICE_NULLDEV	1       /* enble null device            */
 #define CONFIG_VERSION_VARIABLE		1
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */
Signature · 5 lines
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Applied
#1 lore raw

PATCH v3 2/2 8xx, kup4: add FDT support

Dear Heiko Schocher,

Quoted 7 lines · In message <[email protected]> you wrote:
Signed-off-by Heiko Schocher <[email protected]>

---
- changes since v1
- rebased against current mainline
- fix printf output

Quoted 8 lines

- changes since v2
added comments from Scott Wood
removed ft_blob_update() complete, because fixups are done in cpu specific code.

 board/kup/kup4k/kup4k.c |   11 +++++++++++
 include/configs/KUP4K.h |    4 ++++
 2 files changed, 15 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The number you have dialed is imaginary. Please divide by 0  and  try
again.