hda_intel: too quiet sound (regression)
Hi,
after I upgraded from 2.6.34-rc5-mm1 to 2.6.35-rc5-mm1 (there were other issues in between them), the sound from my soundcard is very very quiet.
alsa-info:
http://www.alsa-project.org/db/?f=dcadb29a2d5d047ecf5545792ac3239dc0c8c7f0
Any ideas?
thanks,
Signature · 1 line
js
Quoted 9 lines · Jiri Slaby
Hi,
after I upgraded from 2.6.34-rc5-mm1 to 2.6.35-rc5-mm1 (there were other issues in between them), the sound from my soundcard is very very quiet.
alsa-info:
http://www.alsa-project.org/db/?f=dcadb29a2d5d047ecf5545792ac3239dc0c8c7f0Any ideas?
I've just find out that whatever value 1-64 is set the Master control to via amixer, it plays still the same. So the mixer (Master volume) is somehow screwed up.
These two are the same volumes:
# amixer -D hw sset Master,0 64 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 64 Mono: Playback 64 [100%] [0.00dB] [on] # amixer -D hw sset Master,0 1 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 64 Mono: Playback 1 [2%] [-47.25dB] [on]
This turns sound off, indeed:
amixer -D hw sset Master,0 0
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 0 [0%] [-48.00dB] [on]
regards,
Signature · 1 line
js
At Mon, 26 Jul 2010 16:42:34 +0200,
Quoted 10 lines · Jiri Slaby
Hi,
after I upgraded from 2.6.34-rc5-mm1 to 2.6.35-rc5-mm1 (there were other issues in between them), the sound from my soundcard is very very quiet.
alsa-info:
http://www.alsa-project.org/db/?f=dcadb29a2d5d047ecf5545792ac3239dc0c8c7f0Any ideas?
Looks like a regression by the amp max value check. The following patch should fix the problem.
thanks,
Takashi
---
Quoted 1 line
From
7ccc3eface57b6e1773fce009dac8a3da081b8b1Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Mon, 26 Jul 2010 17:00:15 +0200
Subject: [PATCH] ALSA: hda - Fix max amp cap calculation for IDT/STAC codecs
The commit afbd9b8448f4b7d15673c6858012f384f18d28b8
ALSA: hda - Limit the amp value to write
introduced a regression for codec setups with amp offsets like IDT/STAC codecs. The limit value should be a raw value without offset calculation.
--- sound/pci/hda/hda_codec.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
sound/pci/hda/hda_codec.c +2 -1
@@ -1629,7 +1629,8 @@ update_amp_value(struct hda_codec *codec, hda_nid_t nid,if (val >0 ) val += ofs; - maxval =get_amp_max_value (codec, nid, dir, ofs); +/* ofs = 0: raw max value */ + maxval =get_amp_max_value (codec, nid, dir,0 );if (val > maxval) val = maxval; return snd_hda_codec_amp_update(codec, nid, ch, dir, idx,
Signature · 1 line
1.7.2
Jiri Slaby
Tested-byQuoted 2 lines · Takashi Iwai
Looks like a regression by the amp max value check. The following patch should fix the problem.
Works for me.
Quoted 6 lines
---
From7ccc3eface57b6e1773fce009dac8a3da081b8b1Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Mon, 26 Jul 2010 17:00:15 +0200
Subject: [PATCH] ALSA: hda - Fix max amp cap calculation for IDT/STAC codecs
Quoted 6 lines
The commit
afbd9b8448f4b7d15673c6858012f384f18d28b8
ALSA: hda - Limit the amp value to write
introduced a regression for codec setups with amp offsets like IDT/STAC codecs. The limit value should be a raw value without offset calculation.Signed-off-by Takashi Iwai <[email protected]>
thanks,
Signature · 1 line
js
Quoted 9 lines · Takashi Iwai
Quoted 7 lines · Jiri Slaby
after I upgraded from 2.6.34-rc5-mm1 to 2.6.35-rc5-mm1 (there were other issues in between them), the sound from my soundcard is very very quiet.
alsa-info:
http://www.alsa-project.org/db/?f=dcadb29a2d5d047ecf5545792ac3239dc0c8c7f0Any ideas?
Quoted 8 lines
Looks like a regression by the amp max value check. The following patch should fix the problem.
---
From7ccc3eface57b6e1773fce009dac8a3da081b8b1Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Mon, 26 Jul 2010 17:00:15 +0200
Subject: [PATCH] ALSA: hda - Fix max amp cap calculation for IDT/STAC codecs
Confirming - I saw the same issue but didn't get a chance to track it down. This patch fixes it. Feel free to stick a Tested-By: on it on its way upstream...
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel