Skip to contentSkip to conversation

Define CROSS_COMPILE in .config (kernel 2.6.35)

DISCUSSION Yegor Yefremov 3 participants 3 messages Aug 4, 2010

lore
Share & tools
lore
#0 lore raw

Has anyone tried this option? If I define my CROSS_COMPILE prefix in .config and then call

make ARCH=arm

then I get following errors:

CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: ?include/generated/mach-types.h? ist bereits aktualisiert.
CC kernel/bounds.s
cc1: error: unrecognized command line option "-mlittle-endian"
cc1: error: unrecognized command line option "-mabi=aapcs-linux"
cc1: error: unrecognized command line option "-mno-thumb-interwork" kernel/bounds.c:1: error: bad value (armv4t) for -march= switch kernel/bounds.c:1: error: bad value (arm9tdmi) for -mtune= switch

the CROSS_COMPILE seems to be ignored. But if I comment the empty CROSS_COMPILE entry in Makefile

#CROSS_COMPILE ?=
CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)

everything is working like a charm. Am I missing something?

Regards,
Yegor

#1 lore raw

Hi:
##Linux-src/Makefile:
ARCH := arm

CROSS_COMPILE   := $(shell if [ -f .cross_compile ]; then \
                                cat .cross_compile; \
                                fi)

#.cross_compile
arm-poky-linux-gnueabi-

B.R
Tommy
--

our psychological growth is the movement from dependence to independence to interdependence!

Quoted 23 lines · At 2010-08-04?"Yegor Yefremov" <[email protected]> wrote:

Has anyone tried this option? If I define my CROSS_COMPILE prefix in .config and then call

make ARCH=arm

then I get following errors:

CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: ?include/generated/mach-types.h? ist bereits aktualisiert.
CC kernel/bounds.s
cc1: error: unrecognized command line option "-mlittle-endian"
cc1: error: unrecognized command line option "-mabi=aapcs-linux"
cc1: error: unrecognized command line option "-mno-thumb-interwork" kernel/bounds.c:1: error: bad value (armv4t) for -march= switch kernel/bounds.c:1: error: bad value (arm9tdmi) for -mtune= switch

the CROSS_COMPILE seems to be ignored. But if I comment the empty CROSS_COMPILE entry in Makefile

#CROSS_COMPILE ?=
CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)

everything is working like a charm. Am I missing something?

Quoted 7 lines

Regards,
Yegor

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100804/48297454/attachment-0001.html>