Problem with configuring xorg to be static
I have a problem with My xorg.conf. For couple days I am trying to configure it to work without monitor. I have Ubuntu Server 10.04 and I need to install Gnome on it, and work via vnc. When I have plugged monitor to station and reboot my computer everything is ok but when i have unplugged monitor and reboot server i have errors and my Gnome didn start. Can you tell me what I am doing wrong? Here is my xconf.org <http://xconf.org>:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"EndSection
Section "Module"
Load "dri"
Load "dri2"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Modes"
Identifier "Cimarron"
Modeline "800x600@60" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
UseModes "Cimarron"EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82G33/G31 Express Integrated Graphics Controller"
BusID "PCI:0:2:0" Option "NoDDC" "true"
Option "ModeDebug" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0" DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600" "800x600@60" "Cimarron"
Viewport 0 0
EndSubSection
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
UseModes "Cimarron"EndSection
And log when monitor is disconnected:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
Current Operating System: Linux Serafin 2.6.32-21-server #32-Ubuntu SMP Fri Apr 16 09:17:34 UTC 2010 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-server root=UUID=75ff4634-9c63-4064-ba20-7a0d9a3689ea ro quiet Build Date: 16 June 2010 09:34:29AM
xorg-server 2:1.7.6-2ubuntu7.2 (For technical support please see http://www.ubuntu.com/support <http://www.ubuntu.com/support>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 15 20:06:25 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7ca300
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:29c2:8086:5044 Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0x88300000/524288, 0x80000000/134217728, 0x88200000/1048576, I/O @ 0x00003130/8 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "ModeDebug" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33 (--) intel(0): Chipset: "G33"
(II) intel(0): Output VGA1 using monitor section Monitor0 (II) intel(0): EDID for output VGA1
(II) intel(0): Output VGA1 disconnected
(WW) intel(0): No outputs definitely connected, trying again... (II) intel(0): Output VGA1 disconnected
(WW) intel(0): Unable to find initial modes
(==) intel(0): video overlay key set to 0x83e
(EE) intel(0): No modes.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
ddxSigGiveUp: Closing log
Signature · 5 lines
*Pozdrawiam,* *Andrzej Bańczak* [email protected] <mailto:[email protected]> <http://www.goldenline.pl/620536> <http://forum.ubuntu.pl/member.php?u=60443>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi Andrzej,
Quoted 1 line · Andrzej Bańczak
I have a problem with My xorg.conf. For couple days I am trying to configure
Have you tried removing the xorg.conf alltogether. These days, the X server is pretty good at auto-configuring itself and most distros ship without it.
Quoted 1 line
it to work without monitor. I have Ubuntu Server 10.04 and I need to install Gnome on it, and work via vnc. When I have plugged monitor to station and
If you plan to ssh in to the box and start a vnc server, then there's no need to have X start up automatically.
Even with I terminal server (graphical login), IIRC you won't be using the hardware's display. You still have to start a virtual display. So starting an X server using your video card is more or less a waste of resources.
-gabriel
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
When I install xorg server the xorg.conf isn`t in /etc/X11/ so I make it by X -configure and i was trying to reconfigureit. I need Gnome install on my Server because an application to automaticly download file (jDownloader) need it. This is home-server with ftp, software to download file, www server ect. It is cheaper to me when I have an jDownloader installed on server to download file at night, rather then have another machine to do it.
Quoted 8 lines
Hi Andrzej,
Quoted 1 line · Andrzej Bańczak
I have a problem with My xorg.conf. For couple days I am trying to configure
Have you tried removing the xorg.conf alltogether. These days, the X server is pretty good at auto-configuring itself and most distros ship without it.
Quoted 7 lines
Quoted 1 line
it to work without monitor. I have Ubuntu Server 10.04 and I need to install Gnome on it, and work via vnc. When I have plugged monitor to station and
If you plan to ssh in to the box and start a vnc server, then there's no need to have X start up automatically.
Even with I terminal server (graphical login), IIRC you won't be using the hardware's display. You still have to start a virtual display. So starting an X server using your video card is more or less a waste of resources.
-gabriel
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 2 lines · Andrzej Bańczak
When I install xorg server the xorg.conf isn`t in
/etc/X11/so I make it by X -configure and i was trying to reconfigureit. I need Gnome install on my
What happens when you delete /etc/X11/xorg.conf and reboot?
-gabriel
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx