Skip to contentSkip to conversation

Add ftrace-stress-test to LTP

PATCH Superseded Li Zefan 3 participants 9 messages Aug 24, 2010 – Sep 6, 2010

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Li Zefan

author
#0 lore raw

PATCH 1/1 Add ftrace-stress-test to LTP

We test ftrace by forking processes to simultaneously and constantly read/write different tracing files in debugfs and procfs.

The test will be skipped if the kernel is older than 2.6.34, mainly because it can crash old kernels.

The test will run by default and will run for 90 seconds.

To run this test only:

	# ./runltp -f tracing
---
 runltp                                             |    3 +-
 runtest/tracing                                    |    2 +
 testcases/kernel/Makefile                          |    2 +-
 testcases/kernel/tracing/Makefile                  |    5 +
 .../kernel/tracing/ftrace_stress_test/Makefile     |    7 +
 .../ftrace_stress_test/ftrace_get_page_size.c      |   10 +
 .../tracing/ftrace_stress_test/ftrace_kvercmp.c    |   37 +++
 .../ftrace_stress/ftrace_buffer_size.sh            |   43 ++++
 .../ftrace_stress/ftrace_current_tracer.sh         |   34 +++
 .../ftrace_stress/ftrace_ftrace_enabled.sh         |   39 ++++
 .../ftrace_stress/ftrace_profile_enabled.sh        |   50 ++++
 .../ftrace_stress/ftrace_set_event.sh              |   44 ++++
 .../ftrace_stress/ftrace_set_ftrace_pid.sh         |   44 ++++
 .../ftrace_stress/ftrace_stack_max_size.sh         |   39 ++++
 .../ftrace_stress/ftrace_stack_trace.sh            |   46 ++++
 .../ftrace_stress/ftrace_trace.sh                  |   27 +++
 .../ftrace_stress/ftrace_trace_clock.sh            |   46 ++++
 .../ftrace_stress/ftrace_trace_options.sh          |   42 ++++
 .../ftrace_stress/ftrace_trace_pipe.sh             |   43 ++++
 .../ftrace_stress/ftrace_trace_stat.sh             |   45 ++++
 .../ftrace_stress/ftrace_tracing_enabled.sh        |   39 ++++
 .../ftrace_stress/ftrace_tracing_max_latency.sh    |   38 +++
 .../ftrace_stress/ftrace_tracing_on.sh             |   39 ++++
 .../ftrace_stress_test/ftrace_stress_test.sh       |  237 ++++++++++++++++++++
 24 files changed, 959 insertions(+), 2 deletions(-)
 create mode 100644 runtest/tracing
 create mode 100644 testcases/kernel/tracing/Makefile
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/Makefile
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh
runltp +2 -1
index b385984..89b1717 100755
@@ -593,7 +593,8 @@ main()
                          ${LTPROOT}/runtest/numa                    \
                          ${LTPROOT}/runtest/hugetlb                 \
                          ${LTPROOT}/runtest/commands                \
-                         ${LTPROOT}/runtest/hyperthreading
+                         ${LTPROOT}/runtest/hyperthreading          \
+                         ${LTPROOT}/runtest/tracing
         do
             [ -e "$SCENFILES" ] || \
             {
runtest/tracing new file +2 -0
new file mode 100644
index 0000000..ef3a048
@@ -0,0 +1,2 @@
+#DESCRIPTION:Tracing testing
+ftrace-stress-test	ftrace_stress_test.sh 90
testcases/kernel/Makefile +1 -1
index e2a9d8e..8c50025 100644
@@ -30,7 +30,7 @@ include $(top_srcdir)/include/mk/env_pre.mk
 ifneq ($(UCLINUX),1)
 SUBDIRS		:= containers connectors controllers fs hotplug io ipc mem \
 		   numa performance_counters power_management pty sched \
-		   security syscalls timers
+		   security syscalls timers tracing
 else
 SUBDIRS		:= syscalls
 endif
testcases/kernel/tracing/Makefile new file +5 -0
new file mode 100644
index 0000000..e9f96c3
@@ -0,0 +1,5 @@
+top_srcdir		?= ../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
testcases/kernel/tracing/ftrace_stress_test/Makefile new file +7 -0
new file mode 100644
index 0000000..e4a913a
@@ -0,0 +1,7 @@
+top_srcdir              ?= ../../../..
+
+include $(top_srcdir)/include/mk/testcases.mk
+
+INSTALL_TARGETS         := *.sh ftrace_stress/*
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c new file +10 -0
new file mode 100644
index 0000000..b52a109
@@ -0,0 +1,10 @@
+#include <unistd.h>
+#include <stdio.h>
+
+int main(void)
+{
+	printf("%d\n", getpagesize());
+
+	return 0;
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c new file +37 -0
new file mode 100644
index 0000000..bd67b37
@@ -0,0 +1,37 @@
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/utsname.h>
+
+int main(int argc, char **argv)
+{
+	struct utsname uval;
+	int k1, k2, k3;
+	int a1, a2, a3;
+	unsigned long r1, r2;
+
+	if (argc != 4) {
+		fprintf(stderr, "Wrong arguments!\n");
+		return -1;
+	}
+
+	a1 = strtol(argv[1], NULL, 10);
+	a2 = strtol(argv[2], NULL, 10);
+	a3 = strtol(argv[3], NULL, 10);
+
+	uname(&uval);
+
+	sscanf(uval.release, "%d.%d.%d", &k1, &k2, &k3);
+
+	r1 = (a1 << 16) + (a2 << 8) + a3;
+	r2 = (k1 << 16) + (k2 << 8) + k3;
+
+	if (r1 > r2)
+		return 0;
+	else if (r1 == r2)
+		return 1;
+	else
+		return 2;
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh new file +43 -0

43 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh new file +34 -0
new file mode 100755
index 0000000..1baed96
@@ -0,0 +1,34 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+for ((; ;))
+{
+	for ((i = 0; i < $LOOP; i++))
+	{
+		for tracer in `cat "$TRACING_PATH"/available_tracers`;
+		do
+			if [ "$tracer" == mmiotrace ]; then
+				continue
+			fi
+
+			echo $tracer > "$TRACING_PATH"/current_tracer 2> /dev/null
+		done
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh new file +39 -0
new file mode 100755
index 0000000..20bb234
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+	count=$(( $count + 1 ))
+
+	for ((i = 0; i < $MAX_LOOP; i++))
+	{
+		echo 0 > /proc/sys/kernel/ftrace_enabled
+		echo 1 > /proc/sys/kernel/ftrace_enabled
+	}
+
+	enable=$(( $count % 3 ))
+
+	if [ $enable -eq 0 ]; then
+		echo 1 > /proc/sys/kernel/ftrace_enabled
+	else
+		echo 0 > /proc/sys/kernel/ftrace_enabled
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh new file +50 -0

50 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh new file +44 -0

44 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh new file +44 -0

44 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh new file +39 -0
new file mode 100755
index 0000000..682d05e
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_STACK_SIZE=8192
+
+if [ ! -e /proc/sys/kernel/stack_tracer_enabled ]; then
+	should_skip=1
+else
+	should_skip=0
+fi
+
+for ((; ;))
+{
+	if [ $should_skip -eq 1 ]; then
+		sleep 2
+		continue
+	fi
+
+	for ((i = 0; i < $MAX_STACK_SIZE; i += 70))
+	{
+		echo $i > "$TRACING_PATH"/stack_max_size
+		cat "$TRACING_PATH"/stack_max_size > /dev/null
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh new file +46 -0

46 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh new file +27 -0
new file mode 100755
index 0000000..e36712b
@@ -0,0 +1,27 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+for ((; ;))
+{
+	for ((i = 0; i < $LOOP; i++))
+	{
+		cat "$TRACING_PATH"/trace > /dev/null
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh new file +46 -0

46 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh new file +42 -0

42 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh new file +43 -0

43 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh new file +45 -0

45 lines not on this page · raw message

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh new file +39 -0
new file mode 100755
index 0000000..69f2ae6
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+	count=$(( $count + 1 ))
+
+	for ((i = 0; i < $MAX_LOOP; i++))
+	{
+		echo 0 > "$TRACING_PATH"/tracing_enabled
+		echo 1 > "$TRACING_PATH"/tracing_enabled
+	}
+
+	enable=$(( $count % 3 ))
+
+	if [ $enable -eq 0 ]; then
+		echo 0 > "$TRACING_PATH"/tracing_enabled
+	else
+		echo 1 > "$TRACING_PATH"/tracing_enabled
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh new file +38 -0
new file mode 100755
index 0000000..f19d734
@@ -0,0 +1,38 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LATENCY=100000
+
+if [ ! -e "$TRACING_PATH"/tracing_max_latency ]; then
+        should_skip=1
+else
+        should_skip=0
+fi
+
+for ((; ;))
+{
+        if [ $should_skip -eq 1 ]; then
+                sleep 2
+                continue
+        fi
+
+	for ((i = 0; i < $MAX_LATENCY; i += 400))
+	{
+		echo $i > "$TRACING_PATH"/tracing_max_latency
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh new file +39 -0
new file mode 100755
index 0000000..672c223
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+	count=$(( $count + 1 ))
+
+	for ((i = 0; i < $MAX_LOOP; i++))
+	{
+		echo 0 > "$TRACING_PATH"/tracing_on
+		echo 1 > "$TRACING_PATH"/tracing_on
+	}
+
+	enable=$(( $count % 3 ))
+
+	if [ $enable -eq 0 ]; then
+		echo 0 > "$TRACING_PATH"/tracing_on
+	else
+		echo 1 > "$TRACING_PATH"/tracing_on
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +237 -0

237 lines not on this page · raw message

Signature · 13 lines
1.6.3


------------------------------------------------------------------------------
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program
Be part of this innovative community and reach millions of netbook users 
worldwide. Take advantage of special opportunities to increase revenue and 
speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
#1 lore raw

Thanks. I need to test this on a suitable kernel. But doubtful if i can add in the default run.

Regards--
Subrata

Quoted 1,168 lines · Li Zefan

We test ftrace by forking processes to simultaneously and constantly read/write different tracing files in debugfs and procfs.

The test will be skipped if the kernel is older than 2.6.34, mainly because it can crash old kernels.

The test will run by default and will run for 90 seconds.

To run this test only:

	# ./runltp -f tracing
---
 runltp                                             |    3 +-
 runtest/tracing                                    |    2 +
 testcases/kernel/Makefile                          |    2 +-
 testcases/kernel/tracing/Makefile                  |    5 +
 .../kernel/tracing/ftrace_stress_test/Makefile     |    7 +
 .../ftrace_stress_test/ftrace_get_page_size.c      |   10 +
 .../tracing/ftrace_stress_test/ftrace_kvercmp.c    |   37 +++
 .../ftrace_stress/ftrace_buffer_size.sh            |   43 ++++
 .../ftrace_stress/ftrace_current_tracer.sh         |   34 +++
 .../ftrace_stress/ftrace_ftrace_enabled.sh         |   39 ++++
 .../ftrace_stress/ftrace_profile_enabled.sh        |   50 ++++
 .../ftrace_stress/ftrace_set_event.sh              |   44 ++++
 .../ftrace_stress/ftrace_set_ftrace_pid.sh         |   44 ++++
 .../ftrace_stress/ftrace_stack_max_size.sh         |   39 ++++
 .../ftrace_stress/ftrace_stack_trace.sh            |   46 ++++
 .../ftrace_stress/ftrace_trace.sh                  |   27 +++
 .../ftrace_stress/ftrace_trace_clock.sh            |   46 ++++
 .../ftrace_stress/ftrace_trace_options.sh          |   42 ++++
 .../ftrace_stress/ftrace_trace_pipe.sh             |   43 ++++
 .../ftrace_stress/ftrace_trace_stat.sh             |   45 ++++
 .../ftrace_stress/ftrace_tracing_enabled.sh        |   39 ++++
 .../ftrace_stress/ftrace_tracing_max_latency.sh    |   38 +++
 .../ftrace_stress/ftrace_tracing_on.sh             |   39 ++++
 .../ftrace_stress_test/ftrace_stress_test.sh       |  237 ++++++++++++++++++++
 24 files changed, 959 insertions(+), 2 deletions(-)
 create mode 100644 runtest/tracing
 create mode 100644 testcases/kernel/tracing/Makefile
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/Makefile
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh
runltp +2 -1
index b385984..89b1717 100755
@@ -593,7 +593,8 @@ main()
                          ${LTPROOT}/runtest/numa                    \
                          ${LTPROOT}/runtest/hugetlb                 \
                          ${LTPROOT}/runtest/commands                \
-                         ${LTPROOT}/runtest/hyperthreading
+                         ${LTPROOT}/runtest/hyperthreading          \
+                         ${LTPROOT}/runtest/tracing
         do
             [ -e "$SCENFILES" ] || \
             {
runtest/tracing new file +2 -0
new file mode 100644
index 0000000..ef3a048
@@ -0,0 +1,2 @@
+#DESCRIPTION:Tracing testing
+ftrace-stress-test	ftrace_stress_test.sh 90
testcases/kernel/Makefile +1 -1
index e2a9d8e..8c50025 100644
@@ -30,7 +30,7 @@ include $(top_srcdir)/include/mk/env_pre.mk
 ifneq ($(UCLINUX),1)
 SUBDIRS		:= containers connectors controllers fs hotplug io ipc mem \
 		   numa performance_counters power_management pty sched \
-		   security syscalls timers
+		   security syscalls timers tracing
 else
 SUBDIRS		:= syscalls
 endif
testcases/kernel/tracing/Makefile new file +5 -0
new file mode 100644
index 0000000..e9f96c3
@@ -0,0 +1,5 @@
+top_srcdir		?= ../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
testcases/kernel/tracing/ftrace_stress_test/Makefile new file +7 -0
new file mode 100644
index 0000000..e4a913a
@@ -0,0 +1,7 @@
+top_srcdir              ?= ../../../..
+
+include $(top_srcdir)/include/mk/testcases.mk
+
+INSTALL_TARGETS         := *.sh ftrace_stress/*
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c new file +10 -0
new file mode 100644
index 0000000..b52a109
@@ -0,0 +1,10 @@
+#include <unistd.h>
+#include <stdio.h>
+
+int main(void)
+{
+	printf("%d\n", getpagesize());
+
+	return 0;
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c new file +37 -0
new file mode 100644
index 0000000..bd67b37
@@ -0,0 +1,37 @@
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/utsname.h>
+
+int main(int argc, char **argv)
+{
+	struct utsname uval;
+	int k1, k2, k3;
+	int a1, a2, a3;
+	unsigned long r1, r2;
+
+	if (argc != 4) {
+		fprintf(stderr, "Wrong arguments!\n");
+		return -1;
+	}
+
+	a1 = strtol(argv[1], NULL, 10);
+	a2 = strtol(argv[2], NULL, 10);
+	a3 = strtol(argv[3], NULL, 10);
+
+	uname(&uval);
+
+	sscanf(uval.release, "%d.%d.%d", &k1, &k2, &k3);
+
+	r1 = (a1 << 16) + (a2 << 8) + a3;
+	r2 = (k1 << 16) + (k2 << 8) + k3;
+
+	if (r1 > r2)
+		return 0;
+	else if (r1 == r2)
+		return 1;
+	else
+		return 2;
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh new file +43 -0
new file mode 100755
index 0000000..af5a98e
@@ -0,0 +1,43 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+# Use up to 10% of free memory
+free_mem=`cat /proc/meminfo | grep '^MemFree' | awk '{ print $2 }'`
+step=$(( $free_mem / 10 / $LOOP ))
+if [ $step -eq 0 ]; then
+	$step=1
+	LOOP=50
+fi
+
+for ((; ;))
+{
+	new_size=1
+	for ((i = 0; i < $LOOP; i++))
+	{
+		echo $new_size > "$TRACING_PATH"/buffer_size_kb
+		new_size=$(( $new_size + $step ))
+	}
+
+	for ((i = 0; i < $LOOP; i++))
+	{
+		new_size=$(( $new_size - $step ))
+		echo $new_size > "$TRACING_PATH"/buffer_size_kb
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh new file +34 -0
new file mode 100755
index 0000000..1baed96
@@ -0,0 +1,34 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+for ((; ;))
+{
+	for ((i = 0; i < $LOOP; i++))
+	{
+		for tracer in `cat "$TRACING_PATH"/available_tracers`;
+		do
+			if [ "$tracer" == mmiotrace ]; then
+				continue
+			fi
+
+			echo $tracer > "$TRACING_PATH"/current_tracer 2> /dev/null
+		done
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh new file +39 -0
new file mode 100755
index 0000000..20bb234
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+	count=$(( $count + 1 ))
+
+	for ((i = 0; i < $MAX_LOOP; i++))
+	{
+		echo 0 > /proc/sys/kernel/ftrace_enabled
+		echo 1 > /proc/sys/kernel/ftrace_enabled
+	}
+
+	enable=$(( $count % 3 ))
+
+	if [ $enable -eq 0 ]; then
+		echo 1 > /proc/sys/kernel/ftrace_enabled
+	else
+		echo 0 > /proc/sys/kernel/ftrace_enabled
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh new file +50 -0
new file mode 100755
index 0000000..9c6162a
@@ -0,0 +1,50 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+if [ ! -e "$TRACING_PATH"/function_profile_enabled ]; then
+	should_skip=1
+else
+	should_skip=0
+fi
+
+for ((; ;))
+{
+	if [ $should_skip -eq 1 ]; then
+		sleep 2
+		continue
+	fi
+
+	count=$(( $count + 1 ))
+
+	for ((i = 0; i < $MAX_LOOP; i++))
+	{
+		echo 0 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+		echo 1 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+	}
+
+	enable=$(( $count % 3 ))
+
+	if [ $enable -eq 0 ]; then
+		echo 1 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+	else
+		echo 0 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh new file +44 -0
new file mode 100755
index 0000000..f876414
@@ -0,0 +1,44 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+for ((; ;))
+{
+	for ((i = 0; i < 100; i++))
+	{
+		echo 1 > "$TRACING_PATH"/events/enable
+		echo 0 > "$TRACING_PATH"/events/enable
+	}
+
+	for dir in `ls $TRACING_PATH/events/`;
+	do
+		if [ ! -d $dir -o "$dir" == ftrace ]; then
+			continue;
+		fi
+
+		for ((i = 0; i < 20; i++))
+		{
+			echo 1 > "$TRACING_PATH"/events/$dir/enable
+			echo 0 > "$TRACING_PATH"/events/$dir/enable
+		}
+	done
+
+	for event in `cat $TRACING_PATH/available_events`;
+	do
+		echo $event >> "$TRACING_PATH"/set_event
+	done
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh new file +44 -0
new file mode 100755
index 0000000..541215c
@@ -0,0 +1,44 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=300
+
+if [ ! -e "$TRACING_PATH"/set_ftrace_pid ]; then
+	should_skip=1
+else
+	should_skip=0
+fi
+
+for ((; ; ))
+{
+	if [ $should_skip -eq 1 ]; then
+		sleep 2
+		continue
+	fi
+
+	for ((j = 0; j < $LOOP; j++))
+	{
+		for ((k = 1; k <= NR_PIDS; k++))
+		{
+			str="\$pid$k"
+			eval echo $str >> "$TRACING_PATH"/set_ftrace_pid
+		}
+
+		echo > "$TRACING_PATH"/set_ftrace_pid
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh new file +39 -0
new file mode 100755
index 0000000..682d05e
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_STACK_SIZE=8192
+
+if [ ! -e /proc/sys/kernel/stack_tracer_enabled ]; then
+	should_skip=1
+else
+	should_skip=0
+fi
+
+for ((; ;))
+{
+	if [ $should_skip -eq 1 ]; then
+		sleep 2
+		continue
+	fi
+
+	for ((i = 0; i < $MAX_STACK_SIZE; i += 70))
+	{
+		echo $i > "$TRACING_PATH"/stack_max_size
+		cat "$TRACING_PATH"/stack_max_size > /dev/null
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh new file +46 -0
new file mode 100755
index 0000000..a406c51
@@ -0,0 +1,46 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=400
+
+if [ ! -e /proc/sys/kernel/stack_tracer_enabled ]; then
+	should_skip=1
+else
+	should_skip=0
+fi
+
+for ((; ;))
+{
+	if [ $should_skip -eq 1 ]; then
+		sleep 2
+		continue
+	fi
+
+	for ((i = 0; i < $LOOP; i++))
+	{
+		cat "$TRACING_PATH"/stack_trace > /dev/null
+	}
+
+	sleep 1
+
+	for ((i = 0; i < $LOOP; i++))
+	{
+		echo 0 > /proc/sys/kernel/stack_tracer_enabled
+		echo 1 > /proc/sys/kernel/stack_tracer_enabled
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh new file +27 -0
new file mode 100755
index 0000000..e36712b
@@ -0,0 +1,27 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+for ((; ;))
+{
+	for ((i = 0; i < $LOOP; i++))
+	{
+		cat "$TRACING_PATH"/trace > /dev/null
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh new file +46 -0
new file mode 100755
index 0000000..51f2507
@@ -0,0 +1,46 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=400
+
+# In kernel which is older than 2.6.32, we set global clock
+# via trace_options.
+./ftrace_kvercmp 2 6 32
+if [ $? -eq 0 ]; then
+        old_kernel=1
+else
+        old_kernel=0
+fi
+
+for ((; ;))
+{
+	if [ $old_kernel -eq 1 ];
+	then
+		for ((i = 0; i < $LOOP; i++))
+		{
+			echo 1 > "$TRACING_PATH"/options/global-clock
+			echo 0 > "$TRACING_PATH"/options/global-clock
+		}
+	else
+		for ((i = 0; i < $LOOP; i++))
+		{
+			echo local > "$TRACING_PATH"/trace_clock
+			echo global > "$TRACING_PATH"/trace_clock
+		}
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh new file +42 -0
new file mode 100755
index 0000000..47d2a62
@@ -0,0 +1,42 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+trace_options=(print-parent sym-offset sym-addr verbose raw hex bin block trace_printk ftrace_preempt branch annotate userstacktrace sym-userobj printk-msg-only context-info latency-format sleep-time graph-time)
+
+NR_TRACE_OPTIONS=19
+
+for ((; ; ))
+{
+	for ((j = 0; j < $LOOP; j++))
+	{
+		num=`date +%N`
+		num=`printf 1%s $num`
+
+		for ((i = 0; i < $NR_TRACE_OPTIONS; i++))
+		{
+			n=$(( ( $num >> $i ) % 2 ))
+			if [ $n -eq 0 ]; then
+				echo 0 > "$TRACING_PATH"/options/${trace_options[$i]}
+			else
+				echo 1 > "$TRACING_PATH"/options/${trace_options[$i]}
+			fi
+		}
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh new file +43 -0
new file mode 100755
index 0000000..cccb7ae
@@ -0,0 +1,43 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+kill_this_pid()
+{
+	/bin/kill -SIGKILL $this_pid
+	wait $this_pid
+	exit 0
+}
+
+trap kill_this_pid SIGUSR1
+
+LOOP=20
+
+for ((; ;))
+{
+	for ((i = 0; i < $LOOP; i++))
+	{
+		cat "$TRACING_PATH"/trace_pipe > /dev/null &
+
+		this_pid=$!
+		usleep 200000
+		/bin/kill -SIGINT $this_pid
+		wait $this_pid
+		this_pid=0
+		usleep 200000
+	}
+
+	sleep 2
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh new file +45 -0
new file mode 100755
index 0000000..ad6859f
@@ -0,0 +1,45 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+should_skip=0
+
+if [ ! -e "$TRACING_PATH"/function_profile_enabled ]; then
+        should_skip=1
+fi
+
+# For kernels older than 2.6.36, this testcase can result in 
+# divide-by-zero kernel bug
+"$TPATH"/ftrace_kvercmp 2 6 36
+if [ $? -eq 0 ]; then
+	should_skip=1
+fi
+
+for ((; ;))
+{
+	if [ $should_skip -eq 1 ]; then
+		sleep 2
+		continue
+	fi
+
+	for ((i = 0; i < $LOOP; i++))
+	{
+		cat "$TRACING_PATH"/trace_stat/function0 > /dev/null 2>&1
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh new file +39 -0
new file mode 100755
index 0000000..69f2ae6
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+	count=$(( $count + 1 ))
+
+	for ((i = 0; i < $MAX_LOOP; i++))
+	{
+		echo 0 > "$TRACING_PATH"/tracing_enabled
+		echo 1 > "$TRACING_PATH"/tracing_enabled
+	}
+
+	enable=$(( $count % 3 ))
+
+	if [ $enable -eq 0 ]; then
+		echo 0 > "$TRACING_PATH"/tracing_enabled
+	else
+		echo 1 > "$TRACING_PATH"/tracing_enabled
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh new file +38 -0
new file mode 100755
index 0000000..f19d734
@@ -0,0 +1,38 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LATENCY=100000
+
+if [ ! -e "$TRACING_PATH"/tracing_max_latency ]; then
+        should_skip=1
+else
+        should_skip=0
+fi
+
+for ((; ;))
+{
+        if [ $should_skip -eq 1 ]; then
+                sleep 2
+                continue
+        fi
+
+	for ((i = 0; i < $MAX_LATENCY; i += 400))
+	{
+		echo $i > "$TRACING_PATH"/tracing_max_latency
+	}
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh new file +39 -0
new file mode 100755
index 0000000..672c223
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+	count=$(( $count + 1 ))
+
+	for ((i = 0; i < $MAX_LOOP; i++))
+	{
+		echo 0 > "$TRACING_PATH"/tracing_on
+		echo 1 > "$TRACING_PATH"/tracing_on
+	}
+
+	enable=$(( $count % 3 ))
+
+	if [ $enable -eq 0 ]; then
+		echo 0 > "$TRACING_PATH"/tracing_on
+	else
+		echo 1 > "$TRACING_PATH"/tracing_on
+	fi
+
+	sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +227 -0
new file mode 100755
index 0000000..3e6c4b7
@@ -0,0 +1,237 @@
+#! /bin/sh
+
+################################################################################
+##                                                                            ##
+## Copyright (c) 2010 FUJITSU LIMITED                                         ##
+##                                                                            ##
+## This program is free software;  you can redistribute it and#or modify      ##
+## it under the terms of the GNU General Public License as published by       ##
+## the Free Software Foundation; either version 2 of the License, or          ##
+## (at your option) any later version.                                        ##
+##                                                                            ##
+## This program is distributed in the hope that it will be useful, but        ##
+## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
+## or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License   ##
+## for more details.                                                          ##
+##                                                                            ##
+## You should have received a copy of the GNU General Public License          ##
+## along with this program;  if not, write to the Free Software               ##
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA    ##
+##                                                                            ##
+## Author: Li Zefan <[email protected]>                                     ##
+##                                                                            ##
+################################################################################
+
+cd $LTPROOT/testcases/bin
+
+export TCID="ftrace-stress-test"
+export TST_TOTAL=1
+export TST_COUNT=1
+
+export TPATH="$PWD"
+export DEBUGFS_PATH="$PWD/debugfs"
+export TRACING_PATH="$PWD/debugfs/tracing"
+export SPATH="$TPATH/ftrace_stress"
+
+test_interval=$1
+
+save_old_setting()
+{
+	cd $TRACING_PATH
+
+	old_trace_options=( `cat trace_options` )
+	old_tracing_on=`cat tracing_on`
+	old_tracing_enabled=`cat tracing_enabled`
+	old_buffer_size=`cat buffer_size_kb`
+
+	if [ -e stack_max_size ]; then
+		old_stack_tracer_enabled=`cat /proc/sys/kernel/stack_tracer_enabled`
+	fi
+
+	if [ -e "/proc/sys/kernel/ftrace_enabled" ]; then
+		old_ftrace_enabled=`cat /proc/sys/kernel/ftrace_enabled`
+	fi
+
+	if [ -e "function_profile_enabled" ]; then
+		old_profile_enabled=`cat function_profile_enabled`
+	fi
+
+	cd - > /dev/null
+}
+
+restore_old_setting()
+{
+	cd $TRACING_PATH
+
+	echo nop > current_tracer
+	echo 0 > events/enable
+	echo 0 > tracing_max_latency 2> /dev/null
+
+	if [ -e trace_clock ]; then
+		echo local > trace_clock
+	fi
+
+	if [ -e "function_pofile_enabled" ]; then
+		echo $old_profile_enabled > function_profile_enabled
+	fi
+
+	if [ -e "/proc/sys/kernel/ftrace_enabled" ]; then
+		echo $old_ftrace_enabled > /proc/sys/kernel/ftrace_enabled
+	fi
+
+	if [ -e stack_max_size ]; then
+		echo $old_stack_tracer_enabled > /proc/sys/kernel/stack_tracer_enabled
+		echo 0 > stack_max_size
+	fi
+
+	echo $old_buffer_size > buffer_size_kb
+	echo $old_tracing_on > tracing_on
+	echo $old_tracing_enabled > tracing_enabled
+
+	for option in ${old_trace_options[*]};
+	do
+		echo $option > trace_options 2> /dev/null
+	done
+
+	echo > trace
+
+	cd - > /dev/null
+}
+
+clean_up()
+{
+	/bin/kill -SIGKILL $pid1
+	/bin/kill -SIGKILL $pid2
+	/bin/kill -SIGKILL $pid3
+	/bin/kill -SIGKILL $pid4
+	/bin/kill -SIGKILL $pid5
+	/bin/kill -SIGKILL $pid6
+	/bin/kill -SIGKILL $pid7
+	/bin/kill -SIGKILL $pid8
+	/bin/kill -SIGKILL $pid9
+	/bin/kill -SIGKILL $pid10
+	/bin/kill -SIGKILL $pid11
+	/bin/kill -SIGUSR1 $pid12
+	/bin/kill -SIGKILL $pid13
+	/bin/kill -SIGKILL $pid14
+	/bin/kill -SIGKILL $pid15
+	/bin/kill -SIGKILL $pid16
+
+	sleep 2
+	restore_old_setting
+
+	umount $DEBUGFS_PATH
+	rmdir $DEBUGFS_PATH
+}
+
+clean_up_exit()
+{
+	clean_up
+	exit 1
+}
+
+export_pids()
+{
+	export pid1 pid2 pid3 pid4 pid5 pid6 pid7 pid8 pid9 pid10 pid11 pid12 \
+		pid13 pid14 pid15 pid16
+
+	export NR_PIDS=16
+}
+
+test_begin()
+{
+	start_time=`date +%s`
+}
+
+test_wait()
+{
+	for ((; ;))
+	{
+		sleep 2
+
+		cur_time=`date +%s`
+		elapsed=$(( $cur_time - $start_time ))
+
+		# run the stress test for $test_interval secs
+		if [ $elapsed -ge $test_interval ]; then
+			break
+		fi
+	}
+}
+
+trap clean_up_exit SIGINT
+
+# Should be run by root user
+if [ "`whoami`" != "root" ]; then
+	tst_brkm TCONF ignored "The test should be run by root user. Skip the test..."
+	exit 0
+fi
+
+# Don't run the test on kernels older than 2.6.34, otherwise
+# it can crash the system if the kernel is not latest-stable
+./ftrace_kvercmp 2 6 34
+if [ $? -eq 0 ]; then
+	tst_brkm TCONF ignored "The test should be run in kernels >= 2.6.34. Skip the test..."
+	exit 0
+fi
+
+mkdir $DEBUGFS_PATH
+mount -t debugfs xxx $DEBUGFS_PATH
+
+# Check to see tracing feature is supported or not
+if [ ! -d $TRACING_PATH ]; then
+	tst_brkm TCONF ignored "Tracing is not supported. Skip the test..."
+	umount $DEBUGFS_PATH
+	rmdir $DEBUGFS_PATH
+	exit 0
+fi
+
+echo "Ftrace Stress Test Begin"
+
+save_old_setting
+
+test_begin
+
+$SPATH/ftrace_trace_clock.sh &
+pid1=$!
+$SPATH/ftrace_current_tracer.sh &
+pid2=$!
+$SPATH/ftrace_trace_options.sh &
+pid3=$!
+$SPATH/ftrace_tracing_max_latency.sh &
+pid4=$!
+$SPATH/ftrace_stack_trace.sh &
+pid5=$!
+$SPATH/ftrace_stack_max_size.sh &
+pid6=$!
+$SPATH/ftrace_tracing_on.sh &
+pid7=$!
+$SPATH/ftrace_tracing_enabled.sh &
+pid8=$!
+$SPATH/ftrace_set_event.sh &
+pid9=$!
+$SPATH/ftrace_buffer_size.sh &
+pid10=$!
+$SPATH/ftrace_trace.sh &
+pid11=$!
+$SPATH/ftrace_trace_pipe.sh &
+pid12=$!
+$SPATH/ftrace_ftrace_enabled.sh &
+pid13=$!
+$SPATH/ftrace_set_ftrace_pid.sh &
+pid14=$!
+$SPATH/ftrace_profile_enabled.sh &
+pid15=$!
+$SPATH/ftrace_trace_stat.sh &
+pid16=$!
+

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh line 237

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +10 -0
+export_pids
+
+test_wait
+
+clean_up
+
+echo "Ftrace Stress Test End"
+
+tst_resm TPASS "finished running the test. Run dmesg to double-check for bugs"
+

------------------------------------------------------------------------------
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

author
#2 lore raw
Quoted 3 lines · Subrata Modak

Thanks. I need to test this on a suitable kernel. But doubtful if i can add in the default run.

Why? Because it costs 90 secs? This is configurable, and some other test suites like cpuctl cost more time.

If a test suite is not run by default, I guess people won't know its existence, probably.

Quoted 18 lines

Regards--
Subrata

Quoted 14 lines · Li Zefan

We test ftrace by forking processes to simultaneously and constantly read/write different tracing files in debugfs and procfs.

The test will be skipped if the kernel is older than 2.6.34, mainly because it can crash old kernels.

The test will run by default and will run for 90 seconds.

To run this test only:

	# ./runltp -f tracing

------------------------------------------------------------------------------
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#3 lore raw
Quoted 10 lines · Li Zefan
Quoted 3 lines · Subrata Modak

Thanks. I need to test this on a suitable kernel. But doubtful if i can add in the default run.

Why? Because it costs 90 secs? This is configurable, and some other test suites like cpuctl cost more time.

If a test suite is not run by default, I guess people won't know its existence, probably.

I think that more of the concern stems from the fact that it's a performance test, and a lot of people complain if and when their test machines slow down to a halt (take hackbench, proc01, for example).

There are issues with the code, but it's dealing with the fact that it's not really written in a portable way. Give me a bit of time and I'll comment on what needs to be changed.

Thanks,
-Garrett

------------------------------------------------------------------------------
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

author
#4 lore raw
Quoted 8 lines · Garrett Cooper
Quoted 7 lines · Li Zefan
Quoted 3 lines · Subrata Modak

Thanks. I need to test this on a suitable kernel. But doubtful if i can add in the default run.

Why? Because it costs 90 secs? This is configurable, and some other test suites like cpuctl cost more time.

Quoted 7 lines
Quoted 2 lines

If a test suite is not run by default, I guess people won't know its existence, probably.

I think that more of the concern stems from the fact that it's a performance test, and a lot of people complain if and when their test machines slow down to a halt (take hackbench, proc01, for example).

It's not a performance test, but a stress test, which aims at revealing racy corners in ftrace. Though it will slow down the machine, it won't halt the machine, unless we hit a serious kernel bug.

Quoted 4 lines

There are issues with the code, but it's dealing with the fact that it's not really written in a portable way. Give me a bit of time and I'll comment on what needs to be changed.

Thanks for reviewing the code. I'm not good at writing protable bash scripts..

------------------------------------------------------------------------------
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#7 lore raw
In reply to Li Zefan
Quoted 170 lines · Li Zefan

We test ftrace by forking processes to simultaneously and constantly read/write different tracing files in debugfs and procfs.

The test will be skipped if the kernel is older than 2.6.34, mainly because it can crash old kernels.

The test will run by default and will run for 90 seconds.

To run this test only:

       # ./runltp -f tracing

---
 runltp                                             |    3 +- runtest/tracing                                    |    2 + testcases/kernel/Makefile                          |    2 +- testcases/kernel/tracing/Makefile                  |    5 + .../kernel/tracing/ftrace_stress_test/Makefile     |    7 + .../ftrace_stress_test/ftrace_get_page_size.c      |   10 + .../tracing/ftrace_stress_test/ftrace_kvercmp.c    |   37 +++ .../ftrace_stress/ftrace_buffer_size.sh            |   43 ++++

 .../ftrace_stress/ftrace_current_tracer.sh         |   34 +++
 .../ftrace_stress/ftrace_ftrace_enabled.sh         |   39 ++++
 .../ftrace_stress/ftrace_profile_enabled.sh        |   50 ++++

 .../ftrace_stress/ftrace_set_event.sh              |   44 ++++ .../ftrace_stress/ftrace_set_ftrace_pid.sh         |   44 ++++ .../ftrace_stress/ftrace_stack_max_size.sh         |   39 ++++ .../ftrace_stress/ftrace_stack_trace.sh            |   46 ++++ .../ftrace_stress/ftrace_trace.sh                  |   27 +++ .../ftrace_stress/ftrace_trace_clock.sh            |   46 ++++ .../ftrace_stress/ftrace_trace_options.sh          |   42 ++++ .../ftrace_stress/ftrace_trace_pipe.sh             |   43 ++++ .../ftrace_stress/ftrace_trace_stat.sh             |   45 ++++ .../ftrace_stress/ftrace_tracing_enabled.sh        |   39 ++++ .../ftrace_stress/ftrace_tracing_max_latency.sh    |   38 +++ .../ftrace_stress/ftrace_tracing_on.sh             |   39 ++++ .../ftrace_stress_test/ftrace_stress_test.sh       |  237 ++++++++++++++++++++

 24 files changed, 959 insertions(+), 2 deletions(-)

 create mode 100644 runtest/tracing
 create mode 100644 testcases/kernel/tracing/Makefile
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/Makefile
 create mode 100644 testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c create mode 100644 testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c
 create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh create mode 100755 testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh

runltp +2 -1
index b385984..89b1717 100755
@@ -593,7 +593,8 @@ main()
                          ${LTPROOT}/runtest/numa                    \
                          ${LTPROOT}/runtest/hugetlb                 \
                          ${LTPROOT}/runtest/commands                \
-                         ${LTPROOT}/runtest/hyperthreading
+                         ${LTPROOT}/runtest/hyperthreading          \
+                         ${LTPROOT}/runtest/tracing

        do
            [ -e "$SCENFILES" ] || \
            {

runtest/tracing new file +2 -0
new file mode 100644
index 0000000..ef3a048
@@ -0,0 +1,2 @@
+#DESCRIPTION:Tracing testing
+ftrace-stress-test     ftrace_stress_test.sh 90
testcases/kernel/Makefile +1 -1
index e2a9d8e..8c50025 100644
@@ -30,7 +30,7 @@ include $(top_srcdir)/include/mk/env_pre.mk
  ifneq ($(UCLINUX),1)
  SUBDIRS                := containers connectors controllers fs hotplug io ipc mem \
                   numa performance_counters power_management pty sched \
-                  security syscalls timers
+                  security syscalls timers tracing

 else
 SUBDIRS                := syscalls
 endif

testcases/kernel/tracing/Makefile new file +5 -0
new file mode 100644
index 0000000..e9f96c3
@@ -0,0 +1,5 @@
+top_srcdir             ?= ../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
testcases/kernel/tracing/ftrace_stress_test/Makefile new file +7 -0
new file mode 100644
index 0000000..e4a913a
@@ -0,0 +1,7 @@
+top_srcdir              ?= ../../../..
+
+include $(top_srcdir)/include/mk/testcases.mk
+
+INSTALL_TARGETS         := *.sh ftrace_stress/*
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/kernel/tracing/ftrace_stress_test/ftrace_get_page_size.c new file +10 -0
new file mode 100644
index 0000000..b52a109
@@ -0,0 +1,10 @@
+#include <unistd.h>
+#include <stdio.h>
+
+int main(void)
+{
+       printf("%d\n", getpagesize());
+
+       return 0;
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c new file +26 -0
new file mode 100644
index 0000000..bd67b37
@@ -0,0 +1,37 @@
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/utsname.h>
+
+int main(int argc, char **argv)
+{
+       struct utsname uval;
+       int k1, k2, k3;
+       int a1, a2, a3;
+       unsigned long r1, r2;
+
+       if (argc != 4) {
+               fprintf(stderr, "Wrong arguments!\n");
+               return -1;
+       }
+
+       a1 = strtol(argv[1], NULL, 10);
+       a2 = strtol(argv[2], NULL, 10);
+       a3 = strtol(argv[3], NULL, 10);
+
+       uname(&uval);
+
+       sscanf(uval.release, "%d.%d.%d", &k1, &k2, &k3);
+

testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c line 36

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c new file +10 -0
+       r1 = (a1 << 16) + (a2 << 8) + a3;
+       r2 = (k1 << 16) + (k2 << 8) + k3;
+
+       if (r1 > r2)
+               return 0;
+       else if (r1 == r2)
+               return 1;
+       else
+               return 2;
+}

This application could be replaced with tst_kvercmp out of the box; there's no reason why another program needs to be created for this.

Quoted 67 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_buffer_size.sh new file +43 -0
new file mode 100755
index 0000000..af5a98e
@@ -0,0 +1,43 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+# Use up to 10% of free memory
+free_mem=`cat /proc/meminfo | grep '^MemFree' | awk '{ print $2 }'`
+step=$(( $free_mem / 10 / $LOOP ))
+if [ $step -eq 0 ]; then
+       $step=1
+       LOOP=50
+fi
+
+for ((; ;))
+{
+       new_size=1
+       for ((i = 0; i < $LOOP; i++))
+       {
+               echo $new_size > "$TRACING_PATH"/buffer_size_kb
+               new_size=$(( $new_size + $step ))
+       }
+
+       for ((i = 0; i < $LOOP; i++))
+       {
+               new_size=$(( $new_size - $step ))
+               echo $new_size > "$TRACING_PATH"/buffer_size_kb
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh new file +12 -0
new file mode 100755
index 0000000..1baed96
@@ -0,0 +1,34 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh line 22

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh new file +10 -0
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+for ((; ;))
+{
+       for ((i = 0; i < $LOOP; i++))
+       {
+               for tracer in `cat "$TRACING_PATH"/available_tracers`;

If you're going to split the for section of the loop from the do section, there's no need to use a semicolon.

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh line 24

Quoted 2 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh new file +2 -0
+               do
+                       if [ "$tracer" == mmiotrace ]; then

Bashism. Replace == with = .

Quoted 455 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_current_tracer.sh new file +10 -0
+                               continue
+                       fi
+
+                       echo $tracer > "$TRACING_PATH"/current_tracer 2> /dev/null
+               done
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_ftrace_enabled.sh new file +39 -0
new file mode 100755
index 0000000..20bb234
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+       count=$(( $count + 1 ))
+
+       for ((i = 0; i < $MAX_LOOP; i++))
+       {
+               echo 0 > /proc/sys/kernel/ftrace_enabled
+               echo 1 > /proc/sys/kernel/ftrace_enabled
+       }
+
+       enable=$(( $count % 3 ))
+
+       if [ $enable -eq 0 ]; then
+               echo 1 > /proc/sys/kernel/ftrace_enabled
+       else
+               echo 0 > /proc/sys/kernel/ftrace_enabled
+       fi
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_profile_enabled.sh new file +50 -0
new file mode 100755
index 0000000..9c6162a
@@ -0,0 +1,50 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+if [ ! -e "$TRACING_PATH"/function_profile_enabled ]; then
+       should_skip=1
+else
+       should_skip=0
+fi
+
+for ((; ;))
+{
+       if [ $should_skip -eq 1 ]; then
+               sleep 2
+               continue
+       fi
+
+       count=$(( $count + 1 ))
+
+       for ((i = 0; i < $MAX_LOOP; i++))
+       {
+               echo 0 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+               echo 1 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+       }
+
+       enable=$(( $count % 3 ))
+
+       if [ $enable -eq 0 ]; then
+               echo 1 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+       else
+               echo 0 > "$TRACING_PATH"/function_profile_enabled 2> /dev/null
+       fi
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_event.sh new file +44 -0
new file mode 100755
index 0000000..f876414
@@ -0,0 +1,44 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+for ((; ;))
+{
+       for ((i = 0; i < 100; i++))
+       {
+               echo 1 > "$TRACING_PATH"/events/enable
+               echo 0 > "$TRACING_PATH"/events/enable
+       }
+
+       for dir in `ls $TRACING_PATH/events/`;
+       do
+               if [ ! -d $dir -o "$dir" == ftrace ]; then
+                       continue;
+               fi
+
+               for ((i = 0; i < 20; i++))
+               {
+                       echo 1 > "$TRACING_PATH"/events/$dir/enable
+                       echo 0 > "$TRACING_PATH"/events/$dir/enable
+               }
+       done
+
+       for event in `cat $TRACING_PATH/available_events`;
+       do
+               echo $event >> "$TRACING_PATH"/set_event
+       done
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_set_ftrace_pid.sh new file +44 -0
new file mode 100755
index 0000000..541215c
@@ -0,0 +1,44 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=300
+
+if [ ! -e "$TRACING_PATH"/set_ftrace_pid ]; then
+       should_skip=1
+else
+       should_skip=0
+fi
+
+for ((; ; ))
+{
+       if [ $should_skip -eq 1 ]; then
+               sleep 2
+               continue
+       fi
+
+       for ((j = 0; j < $LOOP; j++))
+       {
+               for ((k = 1; k <= NR_PIDS; k++))
+               {
+                       str="\$pid$k"
+                       eval echo $str >> "$TRACING_PATH"/set_ftrace_pid
+               }
+
+               echo > "$TRACING_PATH"/set_ftrace_pid
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_max_size.sh new file +39 -0
new file mode 100755
index 0000000..682d05e
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_STACK_SIZE=8192
+
+if [ ! -e /proc/sys/kernel/stack_tracer_enabled ]; then
+       should_skip=1
+else
+       should_skip=0
+fi
+
+for ((; ;))
+{
+       if [ $should_skip -eq 1 ]; then
+               sleep 2
+               continue
+       fi
+
+       for ((i = 0; i < $MAX_STACK_SIZE; i += 70))
+       {
+               echo $i > "$TRACING_PATH"/stack_max_size
+               cat "$TRACING_PATH"/stack_max_size > /dev/null
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_stack_trace.sh new file +46 -0
new file mode 100755
index 0000000..a406c51
@@ -0,0 +1,46 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=400
+
+if [ ! -e /proc/sys/kernel/stack_tracer_enabled ]; then
+       should_skip=1
+else
+       should_skip=0
+fi
+
+for ((; ;))
+{
+       if [ $should_skip -eq 1 ]; then
+               sleep 2
+               continue
+       fi
+
+       for ((i = 0; i < $LOOP; i++))
+       {
+               cat "$TRACING_PATH"/stack_trace > /dev/null
+       }
+
+       sleep 1
+
+       for ((i = 0; i < $LOOP; i++))
+       {
+               echo 0 > /proc/sys/kernel/stack_tracer_enabled
+               echo 1 > /proc/sys/kernel/stack_tracer_enabled
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace.sh new file +27 -0
new file mode 100755
index 0000000..e36712b
@@ -0,0 +1,27 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+for ((; ;))
+{
+       for ((i = 0; i < $LOOP; i++))
+       {
+               cat "$TRACING_PATH"/trace > /dev/null
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_clock.sh new file +46 -0
new file mode 100755
index 0000000..51f2507
@@ -0,0 +1,46 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=400
+
+# In kernel which is older than 2.6.32, we set global clock
+# via trace_options.
+./ftrace_kvercmp 2 6 32
+if [ $? -eq 0 ]; then
+        old_kernel=1
+else
+        old_kernel=0
+fi
+
+for ((; ;))
+{
+       if [ $old_kernel -eq 1 ];
+       then
+               for ((i = 0; i < $LOOP; i++))
+               {
+                       echo 1 > "$TRACING_PATH"/options/global-clock
+                       echo 0 > "$TRACING_PATH"/options/global-clock
+               }
+       else
+               for ((i = 0; i < $LOOP; i++))
+               {
+                       echo local > "$TRACING_PATH"/trace_clock
+                       echo global > "$TRACING_PATH"/trace_clock
+               }
+       fi
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_options.sh new file +42 -0
new file mode 100755
index 0000000..47d2a62
@@ -0,0 +1,42 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+trace_options=(print-parent sym-offset sym-addr verbose raw hex bin block trace_printk ftrace_preempt branch annotate userstacktrace sym-userobj printk-msg-only context-info latency-format sleep-time graph-time)
+
+NR_TRACE_OPTIONS=19
+
+for ((; ; ))
+{
+       for ((j = 0; j < $LOOP; j++))
+       {
+               num=`date +%N`
+               num=`printf 1%s $num`
+
+               for ((i = 0; i < $NR_TRACE_OPTIONS; i++))
+               {
+                       n=$(( ( $num >> $i ) % 2 ))
+                       if [ $n -eq 0 ]; then
+                               echo 0 > "$TRACING_PATH"/options/${trace_options[$i]}
+                       else
+                               echo 1 > "$TRACING_PATH"/options/${trace_options[$i]}
+                       fi
+               }
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh new file +8 -0
new file mode 100755
index 0000000..cccb7ae
@@ -0,0 +1,43 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh line 18

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh new file +10 -0
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+kill_this_pid()
+{
+       /bin/kill -SIGKILL $this_pid

kill shouldn't be explicitly called out as /bin/kill. IIRC there are some distros out there that place this elsewhere.

Quoted 6 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh new file +6 -0
+       wait $this_pid
+       exit 0
+}
+
+trap kill_this_pid SIGUSR1
+

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh line 34

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh new file +10 -0
+LOOP=20
+
+for ((; ;))
+{
+       for ((i = 0; i < $LOOP; i++))
+       {
+               cat "$TRACING_PATH"/trace_pipe > /dev/null &
+
+               this_pid=$!
+               usleep 200000

Is usleep a standard linux command (I didn't think so, but I could be wrong..)?

Quoted 281 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_pipe.sh new file +9 -0
+               /bin/kill -SIGINT $this_pid
+               wait $this_pid
+               this_pid=0
+               usleep 200000
+       }
+
+       sleep 2
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_trace_stat.sh new file +45 -0
new file mode 100755
index 0000000..ad6859f
@@ -0,0 +1,45 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+LOOP=200
+
+should_skip=0
+
+if [ ! -e "$TRACING_PATH"/function_profile_enabled ]; then
+        should_skip=1
+fi
+
+# For kernels older than 2.6.36, this testcase can result in
+# divide-by-zero kernel bug
+"$TPATH"/ftrace_kvercmp 2 6 36
+if [ $? -eq 0 ]; then
+       should_skip=1
+fi
+
+for ((; ;))
+{
+       if [ $should_skip -eq 1 ]; then
+               sleep 2
+               continue
+       fi
+
+       for ((i = 0; i < $LOOP; i++))
+       {
+               cat "$TRACING_PATH"/trace_stat/function0 > /dev/null 2>&1
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_enabled.sh new file +39 -0
new file mode 100755
index 0000000..69f2ae6
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+       count=$(( $count + 1 ))
+
+       for ((i = 0; i < $MAX_LOOP; i++))
+       {
+               echo 0 > "$TRACING_PATH"/tracing_enabled
+               echo 1 > "$TRACING_PATH"/tracing_enabled
+       }
+
+       enable=$(( $count % 3 ))
+
+       if [ $enable -eq 0 ]; then
+               echo 0 > "$TRACING_PATH"/tracing_enabled
+       else
+               echo 1 > "$TRACING_PATH"/tracing_enabled
+       fi
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_max_latency.sh new file +38 -0
new file mode 100755
index 0000000..f19d734
@@ -0,0 +1,38 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LATENCY=100000
+
+if [ ! -e "$TRACING_PATH"/tracing_max_latency ]; then
+        should_skip=1
+else
+        should_skip=0
+fi
+
+for ((; ;))
+{
+        if [ $should_skip -eq 1 ]; then
+                sleep 2
+                continue
+        fi
+
+       for ((i = 0; i < $MAX_LATENCY; i += 400))
+       {
+               echo $i > "$TRACING_PATH"/tracing_max_latency
+       }
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress/ftrace_tracing_on.sh new file +39 -0
new file mode 100755
index 0000000..672c223
@@ -0,0 +1,39 @@
+#! /bin/sh
+
+###############################################################################
+#                                                                             #
+# Copyright (c) 2010 FUJITSU LIMITED                                          #
+#                                                                             #
+# This program is free software; you can redistribute it and/or modify it     #
+# under the terms of the GNU General Public License as published by the Free  #
+# Software Foundation; either version 2 of the License, or (at your option)   #
+# any later version.                                                          #
+#                                                                             #
+# Author: Li Zefan <[email protected]>                                      #
+#                                                                             #
+###############################################################################
+
+MAX_LOOP=1500
+count=0
+
+for ((; ;))
+{
+       count=$(( $count + 1 ))
+
+       for ((i = 0; i < $MAX_LOOP; i++))
+       {
+               echo 0 > "$TRACING_PATH"/tracing_on
+               echo 1 > "$TRACING_PATH"/tracing_on
+       }
+
+       enable=$(( $count % 3 ))
+
+       if [ $enable -eq 0 ]; then
+               echo 0 > "$TRACING_PATH"/tracing_on
+       else
+               echo 1 > "$TRACING_PATH"/tracing_on
+       fi
+
+       sleep 1
+}
+
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +81 -0
new file mode 100755
index 0000000..3e6c4b7
@@ -0,0 +1,237 @@
+#! /bin/sh
+
+################################################################################
+##                                                                            ##
+## Copyright (c) 2010 FUJITSU LIMITED                                         ##
+##                                                                            ##
+## This program is free software;  you can redistribute it and#or modify      ##
+## it under the terms of the GNU General Public License as published by       ##
+## the Free Software Foundation; either version 2 of the License, or          ##
+## (at your option) any later version.                                        ##
+##                                                                            ##
+## This program is distributed in the hope that it will be useful, but        ##
+## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
+## or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License   ##
+## for more details.                                                          ##
+##                                                                            ##
+## You should have received a copy of the GNU General Public License          ##
+## along with this program;  if not, write to the Free Software               ##
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA    ##
+##                                                                            ##
+## Author: Li Zefan <[email protected]>                                     ##
+##                                                                            ##
+################################################################################
+
+cd $LTPROOT/testcases/bin
+
+export TCID="ftrace-stress-test"
+export TST_TOTAL=1
+export TST_COUNT=1
+
+export TPATH="$PWD"
+export DEBUGFS_PATH="$PWD/debugfs"
+export TRACING_PATH="$PWD/debugfs/tracing"
+export SPATH="$TPATH/ftrace_stress"
+
+test_interval=$1
+
+save_old_setting()
+{
+       cd $TRACING_PATH
+
+       old_trace_options=( `cat trace_options` )
+       old_tracing_on=`cat tracing_on`
+       old_tracing_enabled=`cat tracing_enabled`
+       old_buffer_size=`cat buffer_size_kb`
+
+       if [ -e stack_max_size ]; then
+               old_stack_tracer_enabled=`cat /proc/sys/kernel/stack_tracer_enabled`
+       fi
+
+       if [ -e "/proc/sys/kernel/ftrace_enabled" ]; then
+               old_ftrace_enabled=`cat /proc/sys/kernel/ftrace_enabled`
+       fi
+
+       if [ -e "function_profile_enabled" ]; then
+               old_profile_enabled=`cat function_profile_enabled`
+       fi
+
+       cd - > /dev/null
+}
+
+restore_old_setting()
+{
+       cd $TRACING_PATH
+
+       echo nop > current_tracer
+       echo 0 > events/enable
+       echo 0 > tracing_max_latency 2> /dev/null
+
+       if [ -e trace_clock ]; then
+               echo local > trace_clock
+       fi
+
+       if [ -e "function_pofile_enabled" ]; then
+               echo $old_profile_enabled > function_profile_enabled
+       fi
+
+       if [ -e "/proc/sys/kernel/ftrace_enabled" ]; then
+               echo $old_ftrace_enabled > /proc/sys/kernel/ftrace_enabled
+       fi
+

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh line 91

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +10 -0
+       if [ -e stack_max_size ]; then
+               echo $old_stack_tracer_enabled > /proc/sys/kernel/stack_tracer_enabled
+               echo 0 > stack_max_size
+       fi
+
+       echo $old_buffer_size > buffer_size_kb
+       echo $old_tracing_on > tracing_on
+       echo $old_tracing_enabled > tracing_enabled
+
+       for option in ${old_trace_options[*]};

Arrays don't exist in portable shell; just do something like:

for option in $old_trace_options

Will the options contain spaces (and hence, be split by accident)?

Quoted 64 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +64 -0
+       do
+               echo $option > trace_options 2> /dev/null
+       done
+
+       echo > trace
+
+       cd - > /dev/null
+}
+
+clean_up()
+{
+       /bin/kill -SIGKILL $pid1
+       /bin/kill -SIGKILL $pid2
+       /bin/kill -SIGKILL $pid3
+       /bin/kill -SIGKILL $pid4
+       /bin/kill -SIGKILL $pid5
+       /bin/kill -SIGKILL $pid6
+       /bin/kill -SIGKILL $pid7
+       /bin/kill -SIGKILL $pid8
+       /bin/kill -SIGKILL $pid9
+       /bin/kill -SIGKILL $pid10
+       /bin/kill -SIGKILL $pid11
+       /bin/kill -SIGUSR1 $pid12
+       /bin/kill -SIGKILL $pid13
+       /bin/kill -SIGKILL $pid14
+       /bin/kill -SIGKILL $pid15
+       /bin/kill -SIGKILL $pid16
+
+       sleep 2
+       restore_old_setting
+
+       umount $DEBUGFS_PATH
+       rmdir $DEBUGFS_PATH
+}
+
+clean_up_exit()
+{
+       clean_up
+       exit 1
+}
+
+export_pids()
+{
+       export pid1 pid2 pid3 pid4 pid5 pid6 pid7 pid8 pid9 pid10 pid11 pid12 \
+               pid13 pid14 pid15 pid16
+
+       export NR_PIDS=16
+}
+
+test_begin()
+{
+       start_time=`date +%s`
+}
+
+test_wait()
+{
+       for ((; ;))
+       {
+               sleep 2
+
+               cur_time=`date +%s`
+               elapsed=$(( $cur_time - $start_time ))
+
+               # run the stress test for $test_interval secs

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh line 165

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +10 -0
+               if [ $elapsed -ge $test_interval ]; then
+                       break
+               fi
+       }
+}
+
+trap clean_up_exit SIGINT
+
+# Should be run by root user
+if [ "`whoami`" != "root" ]; then

id -ru = 0 is better.

Quoted 61 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +61 -0
+       tst_brkm TCONF ignored "The test should be run by root user. Skip the test..."
+       exit 0
+fi
+
+# Don't run the test on kernels older than 2.6.34, otherwise
+# it can crash the system if the kernel is not latest-stable
+./ftrace_kvercmp 2 6 34
+if [ $? -eq 0 ]; then
+       tst_brkm TCONF ignored "The test should be run in kernels >= 2.6.34. Skip the test..."
+       exit 0
+fi
+
+mkdir $DEBUGFS_PATH
+mount -t debugfs xxx $DEBUGFS_PATH
+
+# Check to see tracing feature is supported or not
+if [ ! -d $TRACING_PATH ]; then
+       tst_brkm TCONF ignored "Tracing is not supported. Skip the test..."
+       umount $DEBUGFS_PATH
+       rmdir $DEBUGFS_PATH
+       exit 0
+fi
+
+echo "Ftrace Stress Test Begin"
+
+save_old_setting
+
+test_begin
+
+$SPATH/ftrace_trace_clock.sh &
+pid1=$!
+$SPATH/ftrace_current_tracer.sh &
+pid2=$!
+$SPATH/ftrace_trace_options.sh &
+pid3=$!
+$SPATH/ftrace_tracing_max_latency.sh &
+pid4=$!
+$SPATH/ftrace_stack_trace.sh &
+pid5=$!
+$SPATH/ftrace_stack_max_size.sh &
+pid6=$!
+$SPATH/ftrace_tracing_on.sh &
+pid7=$!
+$SPATH/ftrace_tracing_enabled.sh &
+pid8=$!
+$SPATH/ftrace_set_event.sh &
+pid9=$!
+$SPATH/ftrace_buffer_size.sh &
+pid10=$!
+$SPATH/ftrace_trace.sh &
+pid11=$!
+$SPATH/ftrace_trace_pipe.sh &
+pid12=$!
+$SPATH/ftrace_ftrace_enabled.sh &
+pid13=$!
+$SPATH/ftrace_set_ftrace_pid.sh &
+pid14=$!
+$SPATH/ftrace_profile_enabled.sh &
+pid15=$!
+$SPATH/ftrace_trace_stat.sh &
+pid16=$!

testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh line 236

Quoted 10 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_stress_test.sh new file +10 -0
+
+export_pids
+
+test_wait
+
+clean_up
+
+echo "Ftrace Stress Test End"
+
+tst_resm TPASS "finished running the test. Run dmesg to double-check for bugs"

------------------------------------------------------------------------------
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

author
#8 lore raw
Quoted 34 lines
Quoted 34 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c new file +31 -0
@@ -0,0 +1,37 @@
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/utsname.h>
+
+int main(int argc, char **argv)
+{
+       struct utsname uval;
+       int k1, k2, k3;
+       int a1, a2, a3;
+       unsigned long r1, r2;
+
+       if (argc != 4) {
+               fprintf(stderr, "Wrong arguments!\n");
+               return -1;
+       }
+
+       a1 = strtol(argv[1], NULL, 10);
+       a2 = strtol(argv[2], NULL, 10);
+       a3 = strtol(argv[3], NULL, 10);
+
+       uname(&uval);
+
+       sscanf(uval.release, "%d.%d.%d", &k1, &k2, &k3);
+
+       r1 = (a1 << 16) + (a2 << 8) + a3;
+       r2 = (k1 << 16) + (k2 << 8) + k3;
+
+       if (r1 > r2)
+               return 0;
Quoted 9 lines

testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c line 36

Quoted 5 lines
testcases/kernel/tracing/ftrace_stress_test/ftrace_kvercmp.c new file +5 -0
+       else if (r1 == r2)
+               return 1;
+       else
+               return 2;
+}

This application could be replaced with tst_kvercmp out of the box; there's no reason why another program needs to be created for this.

This stress test was not written for LTP originally, so I had to write this ftrace_kvercmp.

But I do have a reason to keep this. That is, using tst_kvercmp will make it harder to run this test without LTP.

Anyway I'll remove it.

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#5 lore raw
In reply to Garrett Cooper

Garret,

Did you get a chance to review these tests further ?

Regards--
Subrata

Quoted 16 lines · Garrett Cooper
Quoted 10 lines · Li Zefan
Quoted 3 lines · Subrata Modak

Thanks. I need to test this on a suitable kernel. But doubtful if i can add in the default run.

Why? Because it costs 90 secs? This is configurable, and some other test suites like cpuctl cost more time.

If a test suite is not run by default, I guess people won't know its existence, probably.

I think that more of the concern stems from the fact that it's a performance test, and a lot of people complain if and when their test machines slow down to a halt (take hackbench, proc01, for example).

Quoted 6 lines

There are issues with the code, but it's dealing with the fact that it's not really written in a portable way. Give me a bit of time and I'll comment on what needs to be changed.

Thanks,
-Garrett

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#6 lore raw
Quoted 3 lines · Subrata Modak

Garret,

Did you get a chance to review these tests further?

(see below for bottom post)

Quoted 13 lines · Garrett Cooper
Quoted 12 lines · Li Zefan
Quoted 10 lines
Quoted 3 lines · Subrata Modak

Thanks. I need to test this on a suitable kernel. But doubtful if i can add in the default run.

Why? Because it costs 90 secs? This is configurable, and some other test suites like cpuctl cost more time.

If a test suite is not run by default, I guess people won't know its existence, probably.

Quoted 7 lines
Quoted 7 lines

I think that more of the concern stems from the fact that it's a performance test, and a lot of people complain if and when their test machines slow down to a halt (take hackbench, proc01, for example).

There are issues with the code, but it's dealing with the fact that it's not really written in a portable way. Give me a bit of time and I'll comment on what needs to be changed.

Li needs to fix some of my concerns which are valid (shell portability by removing bashisms). Once that's done, then we can move on to the next stage of review and potentially commit.

Thanks,
-Garrett

PS I still think that tst_kvercmp should be used because it's a lot more versatile than what's added here, and will result in less bitrotted code in the future.

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list