sdhci-s3c: support clock enable/disable (clock-gating)
Subsystems (3)
Jaehoon Chung
maintainerRFC 1/1 sdhci-s3c: support clock enable/disable (clock-gating)
Hi all,
This is a RFC patch that support clock-gating for saving power consumption. I found mmc_host_enable/mmc_host_disable function in core.c
(using MMC_CAP_DSIABLE. i think that use when host enable/disable) So, i used that functions and implemented some functions in sdhci-s3c.c & sdhci.c
Expect any feedback.
Thank you all
Signed-off-by Jaehoon Chung <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
--- drivers/mmc/host/sdhci-s3c.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci.c | 30 ++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci.h | 4 ++++ 3 files changed, 70 insertions(+), 0 deletions(-)
drivers/mmc/host/sdhci-s3c.c +36 -0
@@ -47,6 +47,7 @@ struct sdhci_s3c {unsigned int cur_clk;int ext_cd_irq;int ext_cd_gpio; +int flag;struct clk *clk_io;struct clk *clk_bus[MAX_BUS_CLK ];
@@ -232,10 +233,45 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)return min; } +static int sdhci_s3c_enable_clk (struct sdhci_host *host) +{ +struct sdhci_s3c *sc =to_s3c (host); + +if (sc->flag !=1 ) { +clk_disable (sc->clk_io); +clk_disable (sc->clk_bus[sc->cur_clk]); + } + +if (sc->host->clk_cnt ==0 ) { +clk_enable (sc->clk_io); +clk_enable (sc->clk_bus[sc->cur_clk]); + sc->host->clk_cnt++; + sc->flag =1 ; + } + +return 0 ; +} + +static int sdhci_s3c_disable_clk (struct sdhci_host *host,int lazy) +{ +struct sdhci_s3c *sc =to_s3c (host); + +if (sc->host->clk_cnt) { +clk_disable (sc->clk_io); +clk_disable (sc->clk_bus[sc->cur_clk]); +if (sc->host->clk_cnt) + sc->host->clk_cnt--; + } + +return 0 ; +} +static struct sdhci_ops sdhci_s3c_ops = { .get_max_clock = sdhci_s3c_get_max_clk, .set_clock = sdhci_s3c_set_clock, .get_min_clock = sdhci_s3c_get_min_clock, + .enable = sdhci_s3c_enable_clk, + .disable = sdhci_s3c_disable_clk, };static void sdhci_s3c_notify_change (struct platform_device *dev,int state)
drivers/mmc/host/sdhci.c +30 -0
@@ -1245,7 +1245,37 @@ out:spin_unlock_irqrestore (&host->lock, flags); } +static int sdhci_enable_clk (struct mmc_host *mmc) +{ +struct sdhci_host *host =mmc_priv (mmc); +int ret =0 ; + +if (host->old_clock !=0 && host->clock ==0 ) { +if (host->ops->enable) + ret = host->ops->enable (host); +sdhci_set_clock (host, host->old_clock); + } + +return ret; +} + +static int sdhci_disable_clk (struct mmc_host *mmc,int lazy) +{ +struct sdhci_host *host =mmc_priv (mmc); +int ret =0 ; + +if (host->clock !=0 ) { + host->old_clock = host->clock; +sdhci_set_clock (host,0 ); +if (host->ops->disable) + ret = host->ops->disable (host, lazy); + } +return ret; +} +static const struct mmc_host_ops sdhci_ops = { + .enable = sdhci_enable_clk, + .disable = sdhci_disable_clk, .request = sdhci_request, .set_ios = sdhci_set_ios, .get_ro = sdhci_get_ro,
drivers/mmc/host/sdhci.h +4 -0
@@ -278,6 +278,8 @@ struct sdhci_host {unsigned int timeout_clk;/* Timeout freq (KHz) */ unsigned int clock;/* Current clock (MHz) */ +unsigned int old_clock;/* Old clock (MHz) */ +unsigned int clk_cnt;/* Clock user count */ u8 pwr;/* Current voltage */ struct mmc_request *mrq;/* Current request */
@@ -323,6 +325,8 @@ struct sdhci_ops {unsigned int (*get_max_clock)(struct sdhci_host *host);unsigned int (*get_min_clock)(struct sdhci_host *host);unsigned int (*get_timeout_clock)(struct sdhci_host *host); +int (*enable)(struct sdhci_host *host); +int (*disable)(struct sdhci_host *host,int lazy); };#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
Signature · 1 line
1.6.0.4