Detect if phy is a/b/g/n?
Is there a way to determine what a/b/g/n modes a particular phy supports? I tried 'iw phy', but I didn't see anything obvious.
Thanks,
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
Quoted 3 lines · Ben Greear
Is there a way to determine what a/b/g/n modes a particular phy supports? I tried 'iw phy', but I didn't see anything obvious.
'iw list' Rates?
Luis
Quoted 6 lines · Luis R. Rodriguez
Quoted 3 lines · Ben Greear
Is there a way to determine what a/b/g/n modes a particular phy supports? I tried 'iw phy', but I didn't see anything obvious.
'iw list' Rates?
Both a/b/g (ath5k) and /n (ath9k) show top speed of 54Mbps on my systems.
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
There should also be a "HT TX/RX MCS rate indexes supported:" for n rates.
Mike
Quoted 25 lines · Ben Greear
Quoted 9 lines · Luis R. Rodriguez
Quoted 4 lines · Ben Greear
Is there a way to determine what a/b/g/n modes a particular phy supports? I tried 'iw phy', but I didn't see anything obvious.
'iw list' Rates?
Both a/b/g (ath5k) and /n (ath9k) show top speed of 54Mbps on my systems.
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 1 line · Michael Griepentrog
There should also be a "HT TX/RX MCS rate indexes supported:" for n rates.
That is unique, so I can use that.
Next time someone is hacking on this, though, it would be nice for a simple print-out of the various a/b/g/n modes supported!
Thanks,
Ben
Quoted 29 lines
Mike
Quoted 25 lines · Ben Greear
Quoted 9 lines · Luis R. Rodriguez
Quoted 4 lines · Ben Greear
Is there a way to determine what a/b/g/n modes a particular phy supports? I tried 'iw phy', but I didn't see anything obvious.
'iw list' Rates?
Both a/b/g (ath5k) and /n (ath9k) show top speed of 54Mbps on my systems.
Ben
--
Ben Greear<[email protected]>
Candela Technologies Inc http://www.candelatech.com--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com