Skip to contentSkip to conversation

- Acer n35 fixes and features

PATCH In review Jiří Pinkava 2 participants 17 messages Oct 4, 2010 – Oct 13, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover - Acer n35 fixes and features

This series fix some minor bugs on Acer n35 and add new features:

* fix invalid key codes (typing error)
* Replace hardcoded numbers by named constants in UART configuration
* Fix MMC power management
* Add touchscreen support
* Add LCD backlight regulation

#1 lore raw

PATCH 1/6 n35: fix key codes and types

---
  arch/arm/mach-s3c2410/mach-n30.c |    5 ++---
  1 files changed, 2 insertions(+), 3 deletions(-)
(quoted diff) +0 -0

b/arch/arm/mach-s3c2410/mach-n30.c
index 41f299d..e732619 100644

arch/arm/mach-s3c2410/mach-n30.c +2 -3
@@ -174,7 +174,6 @@ static struct gpio_keys_button n35_buttons[] = {
  	{
  		.gpio		= S3C2410_GPF(0),
  		.code		= KEY_POWER,
-		.type		= EV_PWR,
  		.desc		= "Power",
  		.active_low	= 0,
  		.wakeup		= 1,
@@ -193,13 +192,13 @@ static struct gpio_keys_button n35_buttons[] = {
  	},
  	{
  		.gpio		= S3C2410_GPG(6),
-		.code		= KEY_DOWN,
+		.code		= KEY_LEFT,
  		.desc		= "Joystick Left",
  		.active_low	= 0,
  	},
  	{
  		.gpio		= S3C2410_GPG(5),
-		.code		= KEY_DOWN,
+		.code		= KEY_RIGHT,
  		.desc		= "Joystick Right",
  		.active_low	= 0,
  	},
Signature · 1 line
1.7.3.1
#2 lore raw

PATCH 2/6 n35: Update GPIO documentation for Acer n35

---
  arch/arm/mach-s3c2410/mach-n30.c |   12 +++++-------
  1 files changed, 5 insertions(+), 7 deletions(-)
(quoted diff) +0 -0

b/arch/arm/mach-s3c2410/mach-n30.c
index e732619..abbb9b5 100644

arch/arm/mach-s3c2410/mach-n30.c +0 -0
@@ -410,13 +410,11 @@ static struct s3c2410_platform_i2c __initdata 

n30_i2ccfg = {
static void __init n30_hwinit(void)
{
/* GPA0-11 special functions -- unknown what they do
- * GPA12 N30 special function -- unknown what it does
- * N35/PiN output -- unknown what it does
- *
- * A12 is nGCS1 on the N30 and an output on the N35/PiN. I
- * don't think it does anything useful on the N30, so I ought
- * to make it an output there too since it always driven to 0
- * as far as I can tell. */
+ * GPA12 N30 special function (nGCS1) -- unknown what it does

+	 *       PiN output -- unknown function
+	 *       N35 output -- turn on/off red led, 0 = normal operation,
+	 *       1 = turn off red led at all. Note: GPD9 must be input or
+	 *       output with value set to 1 before setting GPA12 to 0. */

if (machine_is_n30())
__raw_writel(0x007fffff, S3C2410_GPACON);
if (machine_is_n35())

Signature · 1 line
1.7.3.1
#3 lore raw

PATCH 3/6] n30: Clean up UARTs configuration

---
  arch/arm/mach-s3c2410/mach-n30.c                 |   28 
+++++++++++++++-------
  arch/arm/plat-samsung/include/plat/regs-serial.h |    3 ++
  2 files changed, 22 insertions(+), 9 deletions(-)
(quoted diff) +0 -0

b/arch/arm/mach-s3c2410/mach-n30.c
index abbb9b5..895e1e9a 100644

arch/arm/mach-s3c2410/mach-n30.c +19 -9
@@ -55,32 +55,42 @@ static struct map_desc n30_iodesc[] __initdata = {
  	/* nothing here yet */
  };
 
+#define UCON	(S3C2410_UCON_DEFAULT | \
+		 S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON	(S3C2410_LCON_CS8 | \
+		 S3C2410_LCON_PNONE)
+
+#define UFCON	(S3C2410_UFCON_FIFOMODE | \
+		 S3C2410_UFCON_RXTRIG8 | \
+		 S3C2410_UFCON_TXTRIG4)
+
  static struct s3c2410_uartcfg n30_uartcfgs[] = {
  	/* Normal serial port */
  	[0] = {
  		.hwport	     = 0,
  		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
  	},
  	/* IR port */
  	[1] = {
  		.hwport	     = 1,
  		.flags	     = 0,
  		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON | S3C2410_LCON_IRM,
+		.ufcon	     = UFCON,
  	},
  	/* On the N30 the bluetooth controller is connected here.
  	 * On the N35 and variants the GPS receiver is connected here. */
  	[2] = {
  		.hwport	     = 2,
  		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
  	},
  };
 
(quoted diff) +0 -0

b/arch/arm/plat-samsung/include/plat/regs-serial.h index 788837e..c64beca 100644

arch/arm/plat-samsung/include/plat/regs-serial.h +3 -0
@@ -114,6 +114,9 @@
 
  #define S3C2410_UFCON_FIFOMODE	  (1<<0)
  #define S3C2410_UFCON_TXTRIG0	  (0<<6)
+#define S3C2410_UFCON_TXTRIG4	  (1<<6)
+#define S3C2410_UFCON_TXTRIG8	  (2<<6)
+#define S3C2410_UFCON_TXTRIG12	  (3<<6)
  #define S3C2410_UFCON_RXTRIG8	  (1<<4)
  #define S3C2410_UFCON_RXTRIG12	  (2<<4)
 
Signature · 1 line
1.7.3.1
#4 lore raw

PATCH 4/6 n30: Fix MMC power management

MMC "works" in both on or off state, but when operate in off causes serious data corruptions.

---
  arch/arm/mach-s3c2410/mach-n30.c |    4 ++--
  1 files changed, 2 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/arch/arm/mach-s3c2410/mach-n30.c
index 895e1e9a..ecc039a 100644

arch/arm/mach-s3c2410/mach-n30.c +0 -0
@@ -366,11 +366,11 @@ static void n30_sdi_set_power(unsigned char 

power_mode, unsigned short vdd)
switch (power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- gpio_set_value(S3C2410_GPG(4), 1);
+ gpio_set_value(S3C2410_GPG(4), 0);
break;
case MMC_POWER_OFF:
default:
- gpio_set_value(S3C2410_GPG(4), 0);
+ gpio_set_value(S3C2410_GPG(4), 1);
break;
}
}

Signature · 1 line
1.7.3.1
#5 lore raw

PATCH 5/6 n30: Add touchscreen support for Ace n35

---
  arch/arm/mach-s3c2410/Kconfig    |    1 +
  arch/arm/mach-s3c2410/mach-n30.c |   13 +++++++++++++
  2 files changed, 14 insertions(+), 0 deletions(-)
arch/arm/mach-s3c2410/Kconfig +1 -0
index 7245a55..1d55349 100644
@@ -100,6 +100,7 @@ config MACH_N30
  	select MACH_N35
  	select S3C_DEV_USB_HOST
  	select S3C_DEV_NAND
+	select S3C2410_SETUP_TS
  	help
  	  Say Y here if you want suppt for the Acer N30, Acer N35,
  	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
(quoted diff) +0 -0

b/arch/arm/mach-s3c2410/mach-n30.c
index ecc039a..be5235d 100644

arch/arm/mach-s3c2410/mach-n30.c +1 -0
@@ -49,6 +49,7 @@
  #include <plat/devs.h>
  #include <plat/mci.h>
  #include <plat/s3c2410.h>
+#include <plat/ts.h>
  #include <plat/udc.h>
 
  static struct map_desc n30_iodesc[] __initdata = {
@@ -116,6 +117,13 @@ static struct s3c2410_udc_mach_info n30_udc_cfg 

__initdata = {
.vbus_pin_inverted = 0,
};

+static struct s3c2410_ts_mach_info n30_ts_cfg __initdata = {
+ .delay = 16383,
+ .presc = 49,
+ .oversampling_shift = 3,
+ .cfg_gpio = s3c24xx_ts_cfg_gpio,
+};
+
static struct gpio_keys_button n30_buttons[] = {
{
.gpio = S3C2410_GPF(0),
@@ -391,6 +399,8 @@ static struct platform_device *n30_devices[] __initdata = {
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
&n30_button_device,
&n30_blue_led,
&n30_warning_led,
@@ -404,6 +414,8 @@ static struct platform_device *n35_devices[] __initdata = {
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
&n35_button_device,
&n35_blue_led,
&n35_warning_led,
@@ -566,6 +578,7 @@ static void __init n30_init(void)
WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));

s3c24xx_fb_set_platdata(&n30_fb_info);
+ s3c24xx_ts_set_platdata(&n30_ts_cfg);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
s3c24xx_mci_set_platdata(&n30_mci_cfg);
s3c_i2c0_set_platdata(&n30_i2ccfg);

Signature · 1 line
1.7.3.1
#6 lore raw

PATCH 6/6 n35: Add LCD backlight regulation

---
  arch/arm/mach-s3c2410/mach-n30.c |   71 
++++++++++++++++++++++++++++++++++++++
  1 files changed, 71 insertions(+), 0 deletions(-)
(quoted diff) +0 -0

b/arch/arm/mach-s3c2410/mach-n30.c
index be5235d..4199143 100644

arch/arm/mach-s3c2410/mach-n30.c +1 -0
@@ -23,6 +23,7 @@
  #include <linux/input.h>
  #include <linux/interrupt.h>
  #include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
  #include <linux/serial_core.h>
  #include <linux/timer.h>
  #include <linux/io.h>
@@ -369,6 +370,74 @@ static struct s3c2410fb_mach_info n30_fb_info 

__initdata = {
.lpcsel = 0x06,
};

+static int n35_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(S3C2410_GPB(0), "Backlight PWM output");
+ if (ret)
+ goto request_gpb0_fail;
+ ret = gpio_request(S3C2410_GPB(1), "Backlight power");
+ if (ret)
+ goto request_gpb1_fail;
+
+ /* set GPB0 as output of PWM timer */
+ gpio_set_value(S3C2410_GPB(0), 0);
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_DOWN);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+ /* backlight power */
+ ret = gpio_direction_output(S3C2410_GPB(1), 1);
+ if (ret)
+ goto direction_gpb1_fail;
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+
+ return 0;
+
+direction_gpb1_fail:
+ gpio_free(S3C2410_GPB(1));
+request_gpb1_fail:
+ gpio_free(S3C2410_GPB(0));
+request_gpb0_fail:
+ return ret;
+}
+
+static int n35_backlight_notify(struct device *dev, int brightness) +{
+ /* power off backlight, values less than 14 are useless */
+ gpio_set_value(S3C2410_GPB(1), brightness > 14 ? 1 : 0);
+ return (brightness > 14 ? brightness : 0);
+}
+
+static void n35_backlight_exit(struct device *dev)
+{
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ gpio_free(S3C2410_GPB(0));
+
+ gpio_set_value(S3C2410_GPB(1), 0);
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+ gpio_free(S3C2410_GPB(1));
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 50,

+	.pwm_period_ns  = 3*1000*1000,
+	.init           = n35_backlight_init,
+	.notify         = n35_backlight_notify,
+	.exit           = n35_backlight_exit,

+};
+
+static struct platform_device n35_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &backlight_data,
+ },
+ .id = -1,
+};
+
static void n30_sdi_set_power(unsigned char power_mode, unsigned short
vdd)
{
switch (power_mode) {
@@ -416,6 +485,8 @@ static struct platform_device *n35_devices[] __initdata = {
&s3c_device_sdi,
&s3c_device_adc,
&s3c_device_ts,
+ &s3c_device_timer[0],
+ &n35_backlight,
&n35_button_device,
&n35_blue_led,
&n35_warning_led,

Signature · 1 line
1.7.3.1
#9 lore raw

cover - Acer n35 fixes and features

In reply to Jiří Pinkava
Quoted 7 lines · Ji?? Pinkava

This series fix some minor bugs on Acer n35 and add new features:

* fix invalid key codes (typing error)
* Replace hardcoded numbers by named constants in UART configuration
* Fix MMC power management
* Add touchscreen support
* Add LCD backlight regulation

first pass looks ok, will try and ensure they're in a branch in the next day or so.

#10 lore raw

cover - Acer n35 fixes and features

In reply to Jiří Pinkava
Quoted 7 lines · Ji?? Pinkava

This series fix some minor bugs on Acer n35 and add new features:

* fix invalid key codes (typing error)
* Replace hardcoded numbers by named constants in UART configuration
* Fix MMC power management
* Add touchscreen support
* Add LCD backlight regulation

Hi, could you repost with some more informative patch descriptions please, and give pointers to any pre-requisities.

#8 lore raw

PATCH 1/6 n35: fix key codes and types

In reply to Ben Dooks

Dne 11.10.2010 01:38, Ben Dooks napsal(a):

Quoted 7 lines · Ji?? Pinkava

A non-empty description would be helpful.

Quoted 1 line

Hi, this doesn't apply to latest linux git.

It is against latest linux git no extra pre-requisities, may be something messed up by my email client, resending with more comments and with git sedn-email.

Quoted 3 lines

Is there something this depends on, or does it need to be re-done?

#11 lore raw

PATCH 1/6 n35: fix key codes

In reply to Jiří Pinkava

Power is ordinary button, marking as type EV_POWER is incorrect.

About KEY_DOWN, someone just copied the code and forgot to asociate proper keycodes. (Descriptions are correct, keycodes are not.)

---
 arch/arm/mach-s3c2410/mach-n30.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)
arch/arm/mach-s3c2410/mach-n30.c +2 -3
index 41f299d..e732619 100644
@@ -174,7 +174,6 @@ static struct gpio_keys_button n35_buttons[] = {
 	{
 		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
-		.type		= EV_PWR,
 		.desc		= "Power",
 		.active_low	= 0,
 		.wakeup		= 1,
@@ -193,13 +192,13 @@ static struct gpio_keys_button n35_buttons[] = {
 	},
 	{
 		.gpio		= S3C2410_GPG(6),
-		.code		= KEY_DOWN,
+		.code		= KEY_LEFT,
 		.desc		= "Joystick Left",
 		.active_low	= 0,
 	},
 	{
 		.gpio		= S3C2410_GPG(5),
-		.code		= KEY_DOWN,
+		.code		= KEY_RIGHT,
 		.desc		= "Joystick Right",
 		.active_low	= 0,
 	},
Signature · 1 line
1.7.3.1
#12 lore raw

PATCH 2/6 n35: Update GPIO documentation for Acer n35

In reply to Jiří Pinkava

More precise and detailed information about GPA12 on Acer n35.

---
 arch/arm/mach-s3c2410/mach-n30.c |   12 +++++-------
 1 files changed, 5 insertions(+), 7 deletions(-)
arch/arm/mach-s3c2410/mach-n30.c +5 -7
index e732619..abbb9b5 100644
@@ -410,13 +410,11 @@ static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
 static void __init n30_hwinit(void)
 {
 	/* GPA0-11 special functions -- unknown what they do
-	 * GPA12 N30 special function -- unknown what it does
-	 *       N35/PiN output -- unknown what it does
-	 *
-	 * A12 is nGCS1 on the N30 and an output on the N35/PiN.  I
-	 * don't think it does anything useful on the N30, so I ought
-	 * to make it an output there too since it always driven to 0
-	 * as far as I can tell. */
+	 * GPA12 N30 special function (nGCS1) -- unknown what it does
+	 *       PiN output -- unknown function
+	 *       N35 output -- turn on/off red led, 0 = normal operation,
+	 *       1 = turn off red led at all. Note: GPD9 must be input or
+	 *       output with value set to 1 before setting GPA12 to 0. */
 	if (machine_is_n30())
 		__raw_writel(0x007fffff, S3C2410_GPACON);
 	if (machine_is_n35())
Signature · 1 line
1.7.3.1
#13 lore raw

PATCH 3/6 n30: Clean up UARTs configuration

In reply to Jiří Pinkava

Just replace numeric constatns with macros in style used in other platforms. Define missing macros for UART register configuration.

---
 arch/arm/mach-s3c2410/mach-n30.c                 |   28 +++++++++++++++-------
 arch/arm/plat-samsung/include/plat/regs-serial.h |    3 ++
 2 files changed, 22 insertions(+), 9 deletions(-)
arch/arm/mach-s3c2410/mach-n30.c +19 -9
index abbb9b5..895e1e9a 100644
@@ -55,32 +55,42 @@ static struct map_desc n30_iodesc[] __initdata = {
 	/* nothing here yet */
 };
 
+#define UCON	(S3C2410_UCON_DEFAULT | \
+		 S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON	(S3C2410_LCON_CS8 | \
+		 S3C2410_LCON_PNONE)
+
+#define UFCON	(S3C2410_UFCON_FIFOMODE | \
+		 S3C2410_UFCON_RXTRIG8 | \
+		 S3C2410_UFCON_TXTRIG4)
+
 static struct s3c2410_uartcfg n30_uartcfgs[] = {
 	/* Normal serial port */
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 	/* IR port */
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
 		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON | S3C2410_LCON_IRM,
+		.ufcon	     = UFCON,
 	},
 	/* On the N30 the bluetooth controller is connected here.
 	 * On the N35 and variants the GPS receiver is connected here. */
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 };
 
arch/arm/plat-samsung/include/plat/regs-serial.h +3 -0
index 788837e..c64beca 100644
@@ -114,6 +114,9 @@
 
 #define S3C2410_UFCON_FIFOMODE	  (1<<0)
 #define S3C2410_UFCON_TXTRIG0	  (0<<6)
+#define S3C2410_UFCON_TXTRIG4	  (1<<6)
+#define S3C2410_UFCON_TXTRIG8	  (2<<6)
+#define S3C2410_UFCON_TXTRIG12	  (3<<6)
 #define S3C2410_UFCON_RXTRIG8	  (1<<4)
 #define S3C2410_UFCON_RXTRIG12	  (2<<4)
 
Signature · 1 line
1.7.3.1
#14 lore raw

PATCH 4/6 n30: Fix MMC power management on Acer n30 / n35

In reply to Jiří Pinkava

Someone (me) messed this up. MMC works even in off state, but causes serious data corruptions during write.

---
 arch/arm/mach-s3c2410/mach-n30.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-s3c2410/mach-n30.c +2 -2
index 895e1e9a..ecc039a 100644
@@ -366,11 +366,11 @@ static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
 	switch (power_mode) {
 	case MMC_POWER_ON:
 	case MMC_POWER_UP:
-		gpio_set_value(S3C2410_GPG(4), 1);
+		gpio_set_value(S3C2410_GPG(4), 0);
 		break;
 	case MMC_POWER_OFF:
 	default:
-		gpio_set_value(S3C2410_GPG(4), 0);
+		gpio_set_value(S3C2410_GPG(4), 1);
 		break;
 	}
 }
Signature · 1 line
1.7.3.1
#15 lore raw

PATCH 5/6 n30: Add touchscreen support for Acer n30 / n35

In reply to Jiří Pinkava
---
 arch/arm/mach-s3c2410/Kconfig    |    1 +
 arch/arm/mach-s3c2410/mach-n30.c |   13 +++++++++++++
 2 files changed, 14 insertions(+), 0 deletions(-)
arch/arm/mach-s3c2410/Kconfig +1 -0
index 7245a55..1d55349 100644
@@ -100,6 +100,7 @@ config MACH_N30
 	select MACH_N35
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C2410_SETUP_TS
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
arch/arm/mach-s3c2410/mach-n30.c +13 -0
index ecc039a..be5235d 100644
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/mci.h>
 #include <plat/s3c2410.h>
+#include <plat/ts.h>
 #include <plat/udc.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
@@ -116,6 +117,13 @@ static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
 	.vbus_pin_inverted	= 0,
 };
 
+static struct s3c2410_ts_mach_info n30_ts_cfg __initdata = {
+	.delay = 16383,
+	.presc = 49,
+	.oversampling_shift = 3,
+	.cfg_gpio = s3c24xx_ts_cfg_gpio,
+};
+
 static struct gpio_keys_button n30_buttons[] = {
 	{
 		.gpio		= S3C2410_GPF(0),
@@ -391,6 +399,8 @@ static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,
+	&s3c_device_adc,
+	&s3c_device_ts,
 	&n30_button_device,
 	&n30_blue_led,
 	&n30_warning_led,
@@ -404,6 +414,8 @@ static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,
+	&s3c_device_adc,
+	&s3c_device_ts,
 	&n35_button_device,
 	&n35_blue_led,
 	&n35_warning_led,
@@ -566,6 +578,7 @@ static void __init n30_init(void)
 	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
 
 	s3c24xx_fb_set_platdata(&n30_fb_info);
+	s3c24xx_ts_set_platdata(&n30_ts_cfg);
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
 	s3c24xx_mci_set_platdata(&n30_mci_cfg);
 	s3c_i2c0_set_platdata(&n30_i2ccfg);
Signature · 1 line
1.7.3.1
#16 lore raw

PATCH 6/6 n35: Add LCD backlight regulation on Acer n35

In reply to Jiří Pinkava
---
 arch/arm/mach-s3c2410/mach-n30.c |   71 ++++++++++++++++++++++++++++++++++++++
 1 files changed, 71 insertions(+), 0 deletions(-)
arch/arm/mach-s3c2410/mach-n30.c +71 -0
index be5235d..4199143 100644
@@ -23,6 +23,7 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 #include <linux/io.h>
@@ -369,6 +370,74 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
 	.lpcsel		= 0x06,
 };
 
+static int n35_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C2410_GPB(0), "Backlight PWM output");
+	if (ret)
+		goto request_gpb0_fail;
+	ret = gpio_request(S3C2410_GPB(1), "Backlight power");
+	if (ret)
+		goto request_gpb1_fail;
+
+	/* set GPB0 as output of PWM timer */
+	gpio_set_value(S3C2410_GPB(0), 0);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_DOWN);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+	/* backlight power */
+	ret = gpio_direction_output(S3C2410_GPB(1), 1);
+	if (ret)
+		goto direction_gpb1_fail;
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+
+	return 0;
+
+direction_gpb1_fail:
+	gpio_free(S3C2410_GPB(1));
+request_gpb1_fail:
+	gpio_free(S3C2410_GPB(0));
+request_gpb0_fail:
+	return ret;
+}
+
+static int n35_backlight_notify(struct device *dev, int brightness)
+{
+	/* power off backlight, values less than 14 are useless */
+	gpio_set_value(S3C2410_GPB(1), brightness > 14 ? 1 : 0);
+	return (brightness > 14 ? brightness : 0);
+}
+
+static void n35_backlight_exit(struct device *dev)
+{
+	gpio_direction_output(S3C2410_GPB(0), 0);
+	gpio_free(S3C2410_GPB(0));
+
+	gpio_set_value(S3C2410_GPB(1), 0);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+	gpio_free(S3C2410_GPB(1));
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 100,
+	.dft_brightness = 50,
+	.pwm_period_ns  = 3*1000*1000,
+	.init           = n35_backlight_init,
+	.notify         = n35_backlight_notify,
+	.exit           = n35_backlight_exit,
+};
+
+static struct platform_device n35_backlight = {
+	.name = "pwm-backlight",
+	.dev  = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &backlight_data,
+	},
+	.id   = -1,
+};
+
 static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
 {
 	switch (power_mode) {
@@ -416,6 +485,8 @@ static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_sdi,
 	&s3c_device_adc,
 	&s3c_device_ts,
+	&s3c_device_timer[0],
+	&n35_backlight,
 	&n35_button_device,
 	&n35_blue_led,
 	&n35_warning_led,
Signature · 1 line
1.7.3.1