Skip to contentSkip to conversation

Observation: GCC-4.3.5 and U-Boot (arm, reloc) not working

U-Boot Reinhard Meyer 1 participant 2 messages Oct 11, 2010

lore
Share & tools
lore
#0 lore raw

Hello,

I just have built gcc-4.3.5 for arm-eabi. When I compile u-boot with it, it stops after the DRAM: 64 MiB. I _assume_ that relocation does not work.

I do not have time right now to further investigate this issue, but if someone else finds the same problem, this might be an issue worth investigating.

Reinhard

#1 lore raw

[U-Boot] Followup: GCC-4.3.5 and U-Boot (arm, reloc) not working

Quoted 8 lines · Reinhard Meyer

Hello,

I just have built gcc-4.3.5 for arm-eabi. When I compile u-boot with it, it stops after the DRAM: 64 MiB. I _assume_ that relocation does not work.

I do not have time right now to further investigate this issue, but if someone else finds the same problem, this might be an issue worth investigating.

Followup:
Kernel compiles and works with gcc 4.3.5

Linux version 2.6.36-rc7+ (reinhard at sieb) (gcc version 4.3.5 (Buildroot 2010.11-git) ) #1 Mon Oct 11 10:37:52 CEST 2010

That _could_ indicate that the ARM u-boot relocation method is toolchain sensitive.

Reinhard