Skip to contentSkip to conversation

Pull request - net

U-Boot Applied Ben Warren 2 participants 2 messages Oct 12, 2010

lore
Share & tools
lore

Ben Warren

author
#0 lore raw

Wolfgang,

The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-x86

are available in the git repository at:

git://git.denx.de/u-boot-net.git master

Andreas Bie?mann (2):
drivers/net/at91_emac.c: increase timeout for autonegotiation drivers/net/at91_emac.c: change return values

Ben Gardiner (1):

       davinci_emac: davinci_eth_set_mac_addr to ->write_hwaddr

Ben Warren (1):
Net: Remove redundant CONFIG_NET_MULTI directives

Ilya Yanok (1):
mpc5xxx_fec: add call to reset_phy() after PHY initialization

Joakim Tjernlund (4):
net: Fix faulty definition of uec_initialize()
UEC: Don't udelay needlessly
UEC PHY: Remove strange 0.5 sec delay UEC PHY: Speed up initial PHY neg.

Michal Simek (2):
net: Fix emaclite driver to support little-endian microblaze
net: Move Emaclite to NET_MULTI

Peter Tyser (1):
rarp: Condtionally compile rarp support

Reinhard Meyer (1):
NET: add ENC28J60 driver using SPI framework

Reinhard Meyer (-VC) (1):

       NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c

Thomas Chou (1):

       smc91111: add write_hwaddr
  arch/arm/include/asm/arch-davinci/emac_defs.h |    1 -
  arch/arm/lib/board.c                          |   19 -
  board/davinci/common/misc.c                   |   41 +-
  board/davinci/common/misc.h                   |    2 +-
  board/davinci/da8xxevm/da830evm.c             |   12 +-
  board/davinci/dm365evm/dm365evm.c             |    2 +-
  board/davinci/dvevm/dvevm.c                   |    2 +-
  board/davinci/sffsdr/sffsdr.c                 |    2 +-
  board/davinci/sonata/sonata.c                 |    2 +-
  common/cmd_net.c                              |    2 +
  drivers/net/Makefile                          |    1 +
  drivers/net/at91_emac.c                       |   20 +-
  drivers/net/davinci_emac.c                    |   80 +-
  drivers/net/enc28j60.c                        | 1548 ++++++++++++-------------
  drivers/net/enc28j60.h                        |  251 ++++
  drivers/net/enc28j60_lpc2292.c                |  983 ++++++++++++++++
  drivers/net/mpc5xxx_fec.c                     |    7 +
  drivers/net/smc91111.c                        |   40 +-
  drivers/net/xilinx_emaclite.c                 |   88 +-
  drivers/qe/uec.c                              |    4 +-
  drivers/qe/uec_phy.c                          |   10 +-
  include/config_cmd_all.h                      |    1 +
  include/configs/SMN42.h                       |    2 +-
  include/configs/lpc2292sodimm.h               |    2 +-
  include/netdev.h                              |    4 +-
  net/Makefile                                  |    2 +-
  net/eth.c                                     |   16 +-
  net/net.c                                     |   11 +-
  28 files changed, 2192 insertions(+), 963 deletions(-)

create mode 100644 drivers/net/enc28j60.h create mode 100644 drivers/net/enc28j60_lpc2292.c

#1 lore raw

Dear Ben Warren,

Quoted 76 lines · In message <[email protected]> you wrote:

Wolfgang,

The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-x86

are available in the git repository at:

git://git.denx.de/u-boot-net.git master

Andreas Bie?mann (2):
drivers/net/at91_emac.c: increase timeout for autonegotiation drivers/net/at91_emac.c: change return values

Ben Gardiner (1):

       davinci_emac: davinci_eth_set_mac_addr to ->write_hwaddr

Ben Warren (1):
Net: Remove redundant CONFIG_NET_MULTI directives

Ilya Yanok (1):
mpc5xxx_fec: add call to reset_phy() after PHY initialization

Joakim Tjernlund (4):
net: Fix faulty definition of uec_initialize()
UEC: Don't udelay needlessly
UEC PHY: Remove strange 0.5 sec delay UEC PHY: Speed up initial PHY neg.

Michal Simek (2):
net: Fix emaclite driver to support little-endian microblaze
net: Move Emaclite to NET_MULTI

Peter Tyser (1):
rarp: Condtionally compile rarp support

Reinhard Meyer (1):
NET: add ENC28J60 driver using SPI framework

Reinhard Meyer (-VC) (1):

       NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c

Thomas Chou (1):

       smc91111: add write_hwaddr
  arch/arm/include/asm/arch-davinci/emac_defs.h |    1 -
  arch/arm/lib/board.c                          |   19 -
  board/davinci/common/misc.c                   |   41 +-
  board/davinci/common/misc.h                   |    2 +-
  board/davinci/da8xxevm/da830evm.c             |   12 +-
  board/davinci/dm365evm/dm365evm.c             |    2 +-
  board/davinci/dvevm/dvevm.c                   |    2 +-
  board/davinci/sffsdr/sffsdr.c                 |    2 +-
  board/davinci/sonata/sonata.c                 |    2 +-
  common/cmd_net.c                              |    2 +
  drivers/net/Makefile                          |    1 +
  drivers/net/at91_emac.c                       |   20 +-
  drivers/net/davinci_emac.c                    |   80 +-
  drivers/net/enc28j60.c                        | 1548 ++++++++++++-------------
  drivers/net/enc28j60.h                        |  251 ++++
  drivers/net/enc28j60_lpc2292.c                |  983 ++++++++++++++++
  drivers/net/mpc5xxx_fec.c                     |    7 +
  drivers/net/smc91111.c                        |   40 +-
  drivers/net/xilinx_emaclite.c                 |   88 +-
  drivers/qe/uec.c                              |    4 +-
  drivers/qe/uec_phy.c                          |   10 +-
  include/config_cmd_all.h                      |    1 +
  include/configs/SMN42.h                       |    2 +-
  include/configs/lpc2292sodimm.h               |    2 +-
  include/netdev.h                              |    4 +-
  net/Makefile                                  |    2 +-
  net/eth.c                                     |   16 +-
  net/net.c                                     |   11 +-
  28 files changed, 2192 insertions(+), 963 deletions(-)
Quoted 2 lines

create mode 100644 drivers/net/enc28j60.h create mode 100644 drivers/net/enc28j60_lpc2292.c

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Too many people are ready to carry the stool when the piano needs  to
be moved.