Skip to contentSkip to conversation

iio - bmp085 most issues done

PATCH New Matthias Brugger 1 participant 1 message Oct 19, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iio - bmp085 most issues done

This patch handles with most of the issues mentioned.

Hope I did it right, with patch submission like this.

---
 drivers/staging/iio/barometer/baro.h   |    2 +-
 drivers/staging/iio/barometer/bmp085.c |   56
++++++++++---------------------
 drivers/staging/iio/barometer/bmp085.h |   37 ++++++++++++++++++++-
 3 files changed, 55 insertions(+), 40 deletions(-)
(quoted diff) +0 -0

b/drivers/staging/iio/barometer/baro.h
index e3b73a1..a25e4cd 100644

drivers/staging/iio/barometer/baro.h +1 -1
@@ -4,5 +4,5 @@
 /* Barometer types of attribute */
 
 #define IIO_DEV_ATTR_BARO_PRESSURE(_mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(baro_pressure, _mode, _show, NULL, _addr)
+	IIO_DEVICE_ATTR(baro_pressure_input, _mode, _show, NULL, _addr)
 
(quoted diff) +0 -0

b/drivers/staging/iio/barometer/bmp085.c
index 67dac39..580bd57 100644

drivers/staging/iio/barometer/bmp085.c +0 -0
@@ -37,7 +37,7 @@ module_param(oss, int , S_IRUSR);
 MODULE_PARM_DESC(oss, "Oversampling setting [0-3]");
 
 /***********************************************************************=

***
- * Calcualtion of temperature and pressure
+ * Calculation of temperature and pressure

*************************************************************************=
*/
static short bmp085_calc_temperature(struct i2c_client *client,
unsigned long ut)
@@ -90,17 +90,6 @@ static long bmp085_calc_pressure(struct i2c_client *client, unsigned long up)
* Digital interface to sensor

*************************************************************************=
*/

-static ssize_t bmp085_read(struct i2c_client *client, u8 reg, size_t count,
- unsigned char *buffer)
-{
- int rc;
- rc =3D i2c_smbus_read_i2c_block_data(client, reg, count, buffer);
- if (rc < 0)
- return -EIO;
-
- return count;
-}
-
static short bmp085_read_temp(struct i2c_client *client) {
s32 ret;
@@ -117,8 +106,9 @@ static short bmp085_read_temp(struct i2c_client *client)
return ret;
}

- mdelay(5);
- ret =3D bmp085_read(client, BMP085_REG_CONV, 2, data->data);
+ msleep(5);
+ ret =3D i2c_smbus_read_i2c_block_data(client, BMP085_REG_CONV, 2,
+ data->data);
if (ret < 0) {
dev_warn(&client->dev, "reading ut failed, value is %#x\n"
, ret);
@@ -139,7 +129,6 @@ static long bmp085_read_pressure(struct i2c_client *client)
u8 xlsb, ret1, ret2;
long pressure;
u8 reg;
- /* TODO should be 4.5, 7.5, 13.5, 25.5 ms */
int time_delay[4] =3D {5, 8, 14, 26};
struct bmp085_data *data =3D i2c_get_clientdata(client);

@@ -163,7 +152,7 @@ static long bmp085_read_pressure(struct i2c_client *client)
if (ret < 0)
return ret;

- mdelay(time_delay[data->oss]);
+ msleep(time_delay[data->oss]);

mutex_lock(&data->bmp085_lock);
ret1 =3D i2c_smbus_read_byte_data(client, 0xf6);
@@ -176,7 +165,6 @@ static long bmp085_read_pressure(struct i2c_client *client)
data->up =3D up;

pressure =3D bmp085_calc_pressure(client, up);
- data->pressure =3D pressure;

return pressure;
}
@@ -199,13 +187,13 @@ static ssize_t barometer_show_temp(struct device *dev,

data->temp =3D status;

- return sprintf(buf, "%ld\n", data->temp);
+ return sprintf(buf, "%d\n", data->temp);
}
static IIO_DEV_ATTR_TEMP_RAW(barometer_show_temp);

/**
- * In standard mode, the temperature has to be reat every second before the
- * pressure can be reat. We leave this semantics to the userspace, if later
+ * In standard mode, the temperature has to be read every second before the
+ * pressure can be read. We leave this semantics to the userspace, if later
* on a trigger based reading will be implemented, this should be
taken into
* account.
*/
@@ -213,7 +201,7 @@ static ssize_t barometer_show_pressure(struct device *dev,
struct device_attribute *da, char *buf)
{
struct iio_dev *indio_dev =3D dev_get_drvdata(dev);
- struct bmp085_data *data =3D indio_dev->dev_data;
+ struct bmp085_data *data =3D iio_dev_get_devdata(indio_dev);
struct i2c_client *client =3D data->client;
long status;

@@ -231,7 +219,7 @@ static ssize_t barometer_show_id_version(struct device *dev,
struct device_attribute *da, char *buf)
{
struct iio_dev *indio_dev =3D dev_get_drvdata(dev);
- struct bmp085_data *data =3D indio_dev->dev_data;
+ struct bmp085_data *data =3D iio_dev_get_devdata(indio_dev);

return sprintf(buf, "%x_%x\n", data->chip_id, data->chip_version);
}
@@ -241,7 +229,7 @@ static ssize_t barometer_show_oss(struct device *dev,
struct device_attribute *da, char *buf)
{
struct iio_dev *indio_dev =3D dev_get_drvdata(dev);
- struct bmp085_data *data =3D indio_dev->dev_data;
+ struct bmp085_data *data =3D iio_dev_get_devdata(indio_dev);

return sprintf(buf, "%d\n", data->oss);
}
@@ -251,7 +239,7 @@ static IIO_CONST_ATTR_TEMP_SCALE("0.1");

static struct attribute *bmp085_attributes[] =3D {
&iio_dev_attr_temp_raw.dev_attr.attr,
- &iio_dev_attr_baro_pressure.dev_attr.attr,
+ &iio_dev_attr_baro_pressure_input.dev_attr.attr,
&iio_dev_attr_revision.dev_attr.attr, &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_const_attr_temp_scale.dev_attr.attr,
@@ -271,15 +259,17 @@ static int bmp085_init_client(struct i2c_client *client)
struct bmp085_data *data =3D i2c_get_clientdata(client); int i;

- i =3D bmp085_read(client, BMP085_REG_CHIP_ID, 1, &data->chip_id);
+ i =3D i2c_smbus_read_i2c_block_data(client, BMP085_REG_CHIP_ID, 1,
+ &data->chip_id);
if (i < 0)
dev_warn(&client->dev, "Chip ID not read\n");

- i =3D bmp085_read(client, BMP085_REG_VERSION, 1, &data->chip_version);
+ i =3D i2c_smbus_read_i2c_block_data(client, BMP085_REG_VERSION, 1,
+ &data->chip_version);
if (i < 0)
dev_warn(&client->dev, "Version not read\n");

- i =3D bmp085_read(client, BMP085_REG_PROM, BMP085_PROM_LENGTH,
+ i =3D i2c_smbus_read_i2c_block_data(client, BMP085_REG_PROM,
BMP085_PROM_LENGTH,
data->data);
if (i < 0)
dev_warn(&client->dev, "Unable to read %d bytes from address "
@@ -300,13 +290,11 @@ static int bmp085_init_client(struct i2c_client *client)
return 0;
}

-static struct i2c_driver bmp085_drv;
static int bmp085_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter =3D to_i2c_adapter(client->dev.parent); struct bmp085_data *data;
- struct bmp085_data *data2;
int status =3D 0;

if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
@@ -326,12 +314,11 @@ static int bmp085_probe(struct i2c_client *client,

data->client =3D client;
i2c_set_clientdata(client, data);
- data2 =3D i2c_get_clientdata(client);

/* Initialize the BMP085 chip */
bmp085_init_client(client);

- __mutex_init(&data->bmp085_lock, "bmp085_lock", NULL);
+ mutex_init(&data->bmp085_lock);

/* Register with IIO */
data->indio_dev =3D iio_allocate_device();
@@ -350,8 +337,6 @@ static int bmp085_probe(struct i2c_client *client,
if (status < 0)
goto err_iio;

- dev_info(&client->dev, "driver enabled\n");
-
return 0;

err_iio:
@@ -365,16 +350,11 @@ static int __devexit bmp085_remove(struct i2c_client *client)
{
struct bmp085_data *data =3D i2c_get_clientdata(client);

- if (mutex_is_locked(&data->bmp085_lock))
- mutex_unlock(&data->bmp085_lock);
-
iio_device_unregister(data->indio_dev);
iio_free_device(data->indio_dev);

kfree(data);

- dev_info(&client->dev, "driver removed\n");
-
return 0;
}

(quoted diff) +0 -0

b/drivers/staging/iio/barometer/bmp085.h
index 5ed2fb1..aec2ee4 100644

drivers/staging/iio/barometer/bmp085.h +36 -1
@@ -35,6 +35,41 @@
 #define BMP085_REG_VERSION	0xD1
 #define BMP085_CHIP_ID		0x55
 
+/*
+ * data structure for every sensor
+ *
+ * @client		i2c client
+ * @ indio_dev		iio device representation
+ *
+ * @bmp085_lock		mutex to synchronize parallel reads and writes
+ *
+ * @oss			oversampling setting, determines how accurate the chip works
+ * @temp		holding actual temperature in 0.1=B0C
+ * @pressure		holding actual pressure in pascal
+ *
+ * @ac1			calibration value read at start-up
+ * @ac2			calibration value read at start-up
+ * @ac3			calibration value read at start-up
+ * @ac4			calibration value read at start-up
+ * @ac5			calibration value read at start-up
+ * @ac6			calibration value read at start-up
+ *
+ * @b1			calibration value read at start-up
+ * @b2			calibration value read at start-up
+ * @b3			calibration value read at start-up
+ *
+ * @mb			calibration value read at start-up
+ * @mc			calibration value read at start-up
+ * @md			calibration value read at start-up
+ *
+ * @ut			raw data to compute temperature
+ * @up			raw data to compute pressure
+ *
+ * @chip_id		id of the chip
+ * @chip_version	version of the chip
+ *
+ * @data		array to read initial calib data as a bulk
+ */
 struct bmp085_data {
 	struct i2c_client *client;
 	struct iio_dev *indio_dev;
@@ -42,7 +77,7 @@ struct bmp085_data {
 	struct mutex bmp085_lock;
 
 	int oss;
-	long temp;
+	s16 temp;
 	long pressure;
 
 	short ac1;

--=20
1.5.6.5