Skip to contentSkip to conversation

ARM: Warning with current master

U-Boot Matthias Weißer 3 participants 7 messages Oct 20, 2010 – Oct 21, 2010

lore
Share & tools
lore
#0 lore raw

Hi

after pulling the latest changes I get the following warning during linking of arm boards (I tested jadecpu and tx25).

arm-unknown-eabi-ld: warning: creating a DT_TEXTREL in object.

Must have something to do with the latest ELF based relocation changes but I am not an expert in these tool chain related issues to dig a bit deeper into this issue.

I didn't test if the image runs on the target.

gcc version is 4.3.4

Matthias

#1 lore raw

Le 20/10/2010 09:22, Matthias Wei?er a ?crit :

Quoted 6 lines

Hi

after pulling the latest changes I get the following warning during linking of arm boards (I tested jadecpu and tx25).

arm-unknown-eabi-ld: warning: creating a DT_TEXTREL in object.

Hmm... Which toolchain do you use?

Amicalement,

Signature · 1 line
Albert.
#2 lore raw

Am 20.10.2010 09:44, schrieb Albert ARIBAUD:

Quoted 9 lines

Le 20/10/2010 09:22, Matthias Wei?er a ?crit :

Quoted 6 lines

Hi

after pulling the latest changes I get the following warning during linking of arm boards (I tested jadecpu and tx25).

arm-unknown-eabi-ld: warning: creating a DT_TEXTREL in object.

Hmm... Which toolchain do you use?

I build it myself using crosstools-ng

$ arm-unknown-eabi-gcc -v
Using built-in specs.
Target: arm-unknown-eabi
Configured with: ~/ctdev/targets/src/gcc-4.3.4/configure 
--build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu 
--target=arm-unknown-eabi --prefix=~/x-tools/arm-unknown-eabi 
--with-local-prefix=~/x-tools/arm-unknown-eabi/arm-unknown-eabi//sys-root --disable-multilib 
--disable-libmudflap 
--with-sysroot=~/x-tools/arm-unknown-eabi/arm-unknown-eabi//sys-root 
--with-newlib --enable-threads=no --disable-shared 
--with-pkgversion=crosstool-NG-1.8.0 --disable-__cxa_atexit 
--with-gmp=~/ctdev/targets/arm-unknown-eabi/build/static 
--with-mpfr=~/ctdev/targets/arm-unknown-eabi/build/static 
--enable-target-optspace --disable-nls --enable-symvers=gnu 
--enable-languages=c,c++
Thread model: single
gcc version 4.3.4 (crosstool-NG-1.8.0)

Hope this helps.

Matthias

#6 lore raw
In reply to Matthias Weißer

Dear =?ISO-8859-15?Q?Matthias_Wei=DFer?=,

Quoted 5 lines · In message <[email protected]> you wrote:

after pulling the latest changes I get the following warning during linking of arm boards (I tested jadecpu and tx25).

arm-unknown-eabi-ld: warning: creating a DT_TEXTREL in object.

Which exact tool chain is this?

Quoted 3 lines

Must have something to do with the latest ELF based relocation changes but I am not an expert in these tool chain related issues to dig a bit deeper into this issue.

Building with ELDK 4.2 works fine:

-> ./MAKEALL jadecpu tx25
Configuring for jadecpu board...
text data bss dec hex filename
197763 19360 266416 483539 760d3 ./u-boot
Configuring for tx25 board...
text data bss dec hex filename
158718 8668 37120 204506 31eda ./u-boot

--------------------- SUMMARY ---------------------------- Boards compiled: 2
----------------------------------------------------------

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The world is no nursery.                              - Sigmund Freud
#3 lore raw
In reply to Matthias Weißer

Le 20/10/2010 09:59, Matthias Wei?er a ?crit :

Quoted 31 lines

Am 20.10.2010 09:44, schrieb Albert ARIBAUD:

Quoted 9 lines

Le 20/10/2010 09:22, Matthias Wei?er a ?crit :

Quoted 6 lines

Hi

after pulling the latest changes I get the following warning during linking of arm boards (I tested jadecpu and tx25).

arm-unknown-eabi-ld: warning: creating a DT_TEXTREL in object.

Hmm... Which toolchain do you use?

I build it myself using crosstools-ng

$ arm-unknown-eabi-gcc -v
Using built-in specs.
Target: arm-unknown-eabi
Configured with: ~/ctdev/targets/src/gcc-4.3.4/configure
--build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu
--target=arm-unknown-eabi --prefix=~/x-tools/arm-unknown-eabi
--with-local-prefix=~/x-tools/arm-unknown-eabi/arm-unknown-eabi//sys-root --disable-multilib
--disable-libmudflap
--with-sysroot=~/x-tools/arm-unknown-eabi/arm-unknown-eabi//sys-root
--with-newlib --enable-threads=no --disable-shared
--with-pkgversion=crosstool-NG-1.8.0 --disable-__cxa_atexit
--with-gmp=~/ctdev/targets/arm-unknown-eabi/build/static
--with-mpfr=~/ctdev/targets/arm-unknown-eabi/build/static
--enable-target-optspace --disable-nls --enable-symvers=gnu
--enable-languages=c,c++
Thread model: single
gcc version 4.3.4 (crosstool-NG-1.8.0)
Quoted 3 lines

Hope this helps.

Matthias

This is an ld, not gcc, issue. What does arm-unknown-eabi-ld -V produce?

Amicalement,

Signature · 1 line
Albert.
#4 lore raw

Am 20.10.2010 22:38, schrieb Albert ARIBAUD:

Quoted 1 line

This is an ld, not gcc, issue. What does arm-unknown-eabi-ld -V produce?

$ arm-unknown-eabi-ld -V
GNU ld (GNU Binutils) 2.19.1
   Supported emulations:
    armelf

Thanks for your time
Matthias

#5 lore raw

Le 21/10/2010 08:03, Matthias Wei?er a ?crit :

Quoted 10 lines

Am 20.10.2010 22:38, schrieb Albert ARIBAUD:

Quoted 1 line

This is an ld, not gcc, issue. What does arm-unknown-eabi-ld -V produce?

$ arm-unknown-eabi-ld -V
GNU ld (GNU Binutils) 2.19.1
    Supported emulations:
     armelf

Thanks for your time
Matthias

Hmm... I use the ELDK toolchain and it says:

GNU ld (GNU Binutils) 2.17.90.20070806
Supported emulations:
armelf_linux_eabi
armelfb_linux_eabi

Maybe you need to look up your build documentation on how to add these emulations, at least armelf_linux_eabi (the armelfb should be useless for u-boot).

Amicalement,

Signature · 1 line
Albert.