problems with "ip xfrm" on 32-bit userspace with 64-bit kernel
Subsystems (2)
We've run into a 32/64 compatibility problem with iproute2. The "ip xfrm monitor acquire" command doesn't work properly due to struct size mismatches between kernel and userspace.
If I modify include/linux/xfrm.h to pack all the structures and rebuild the kernel and userspace, this message is displayed properly. However, this shouldn't be necessary and might not work on all architectures.
Anyone got any ideas that are less drastic?
Thanks,
Chris
Details:
iproute2-2.6.35.tar.bz2 package (the "ip" binary reports a version of iproute2-ss100804)
2.6.27.18 kernel, ARCH is x86, kernel is 64-bit, userspace is 32-bit.
To reproduce:
1. Find a src and dst IP address that normally passes a ping test
ping -I 172.25.0.4 172.25.132.1
2. Setup a single outgoing IPsec policy that will require an IPsec SA on the next ping packet.
setkey -c << EOF
spdadd 172.24.132.4/32[any] 172.24.136.0/32[any] any -P out ipsec esp/transport//unique:1;
EOF
3. In a separate window/terminal, launch the following command to monitor Netlink messages from the kernel
ip xfrm monitor acquire
4. Send a ping packet (this command will block, or fail depending on your kernel config)
ping -I 172.25.0.4 172.25.132.1
5. The "ip xfrm monitor acquire" command displays something similar to this:
!!!Deficit 72, rta_len=1
acquire proto esp
sel src 172.25.0.4/32 dst 172.25.132.1/32 proto udp sport 44136 dport 1025 policy src 172.25.0.4/32 dst 172.25.132.1/32
dir out priority 2147483648 ptype main
6. The "!!!Deficit 72, rta_len=1" string at the beginning of the message is complaining about mismatches between the total reported
length of the Netlink message and the useable length detected. Also,
the ACQUIRE message is incomplete as shown--there are attributes such as the reqId value that are not displayed.
7. Now clean up after yourself and take down the ipsec policy:
setkey -c << EOF
spddelete 172.24.132.4/32[any] 172.24.136.0/32[any] any -P out ipsec esp/transport//unique:1;
EOF
Signature · 5 lines
Chris Friesen Software Developer GENBAND [email protected] www.genband.com
Quoted 3 lines · Chris Friesen
We've run into a 32/64 compatibility problem with iproute2. The "ip xfrm monitor acquire" command doesn't work properly due to struct size mismatches between kernel and userspace.
Yes. See archives for 'xfrm: add x86 CONFIG_COMPAT support'
(http://marc.info/?t=127050655600003&r=1&w=2)
for a discussion on why the patch set to fix this was rejected.
Quoted 9 lines · Florian Westphal
Quoted 3 lines · Chris Friesen
We've run into a 32/64 compatibility problem with iproute2. The "ip xfrm monitor acquire" command doesn't work properly due to struct size mismatches between kernel and userspace.
Yes. See archives for 'xfrm: add x86
CONFIG_COMPATsupport'
(http://marc.info/?t=127050655600003&r=1&w=2)for a discussion on why the patch set to fix this was rejected.
Interesting discussion. Kind of sucks for people trying to use it though.
How do distros resolve this? Do they build iproute2 as a 64-bit package or something?
Chris
Signature · 5 lines
Chris Friesen Software Developer GENBAND [email protected] www.genband.com