Media Network Demo: Black Sand and Netbook
I build mediatomb and rygel live atom-pc images from today's poky/master + meta-demo/master. I booted mediatomb on the BlackSand and rygel on the netbook. I had to manually start the rygel renderer on the netbook. I didn't see gupnp-av-cp on the rygel image as I expected and the gupnp-universal-cp command failed to start on the netbook (via a sato terminal) complaining about missing icons. If I tried to stabrt this over an ssh - connection, the gupnp-universal-cp started fine (strange).
I could run gupnp-av-cp from my laptop (Ubuntu 10.10) and play music from mediatomb on the rygel renderer. (YAY)
What I'd like to see is for gupnp-av-cp to start automatically after the sato desktop loads on each renderer. This would make each renderer a standalone player.
So, it's functional (awesome!) and I see these ARs as pending for the demo images:
[ ] add gupnp-av-cp to the rygel image
[ ] start rygel on boot (after networking)
[ ] start gupnp-av-cp after the sato desktop loads on the rygel image [ ] setup networking on each of the non-nas images to dhcp on eth0
With the above, each image should boot to a functional state with no manual interference required.
How much of the above is already planned and how much do we need to get an owner for?
Signature · 2 lines
Darren Hart Embedded Linux Kernel
Quoted 11 lines · Darren Hart
I build mediatomb and rygel live atom-pc images from today's poky/master
+ meta-demo/master. I booted mediatomb on the BlackSand and rygel on the netbook. I had to manually start the rygel renderer on the netbook. I didn't see gupnp-av-cp on the rygel image as I expected and the gupnp-universal-cp command failed to start on the netbook (via a sato terminal) complaining about missing icons. If I tried to stabrt this over an ssh - connection, the gupnp-universal-cp started fine (strange).I could run gupnp-av-cp from my laptop (Ubuntu 10.10) and play music from mediatomb on the rygel renderer. (YAY)
Quoted 8 lines
What I'd like to see is for gupnp-av-cp to start automatically after the sato desktop loads on each renderer. This would make each renderer a standalone player.
So, it's functional (awesome!) and I see these ARs as pending for the demo images:
[ ] add gupnp-av-cp to the rygel image
I think this is already done - I have it on my image and it works for me.
Quoted 4 lines
[ ] start rygel on boot (after networking)
[ ] start gupnp-av-cp after the sato desktop loads on the rygel image [ ] setup networking on each of the non-nas images to dhcp on eth0
eth0 on the rygel image seems to come up ok, it's just the mediatomb image that doesn't afaics. I'll probably look into this tonight.
I also added a small change in tom/demo that allows the mediatomb image to do nfs. After doing that, I was able to mount an nfs share from my laptop on the Black Sand, and have mediatomb add all the media there.
Tom
Quoted 6 lines
With the above, each image should boot to a functional state with no manual interference required.
How much of the above is already planned and how much do we need to get an owner for?
Quoted 7 lines · Darren Hart
I build mediatomb and rygel live atom-pc images from today's poky/master
+ meta-demo/master. I booted mediatomb on the BlackSand and rygel on the netbook. I had to manually start the rygel renderer on the netbook. I didn't see gupnp-av-cp on the rygel image as I expected and the gupnp-universal-cp command failed to start on the netbook (via a sato terminal) complaining about missing icons. If I tried to stabrt this over an ssh - connection, the gupnp-universal-cp started fine (strange).
Hmm, I've commits to fix both of those issues in meta-demo master since at least yesterday morning.b
Quoted 3 lines
I could run gupnp-av-cp from my laptop (Ubuntu 10.10) and play music from mediatomb on the rygel renderer. (YAY)
Cool!
Quoted 9 lines
What I'd like to see is for gupnp-av-cp to start automatically after the sato desktop loads on each renderer. This would make each renderer a standalone player.
So, it's functional (awesome!) and I see these ARs as pending for the demo images:
[ ] add gupnp-av-cp to the rygel image
Already done
Quoted 1 line
[ ] start rygel on boot (after networking)
I'll take this AR
Quoted 1 line
[ ] start gupnp-av-cp after the sato desktop loads on the rygel image
I'll take this AR too
Quoted 8 lines
[ ] setup networking on each of the non-nas images to dhcp on eth0
With the above, each image should boot to a functional state with no manual interference required.
How much of the above is already planned and how much do we need to get an owner for?
I'll handle the Rygel and gupnp-av-cp ones, they where already on my list :-)
Cheers,
Joshua
Signature · 13 lines
Joshua Lock
Intel Open Source Technology Centre
---------------------------------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.Quoted 11 lines · Joshua Lock
Quoted 7 lines · Darren Hart
I build mediatomb and rygel live atom-pc images from today's poky/master
+ meta-demo/master. I booted mediatomb on the BlackSand and rygel on the netbook. I had to manually start the rygel renderer on the netbook. I didn't see gupnp-av-cp on the rygel image as I expected and the gupnp-universal-cp command failed to start on the netbook (via a sato terminal) complaining about missing icons. If I tried to stabrt this over an ssh - connection, the gupnp-universal-cp started fine (strange).Hmm, I've commits to fix both of those issues in meta-demo master since at least yesterday morning.b
I think my build just has some stale data that the various cleans haven't cleared. I'm going to try some clean builds today.
Signature · 2 lines
Darren Hart Embedded Linux Kernel