Skip to contentSkip to conversation

Topcliff: Update PCH_GPIO driver to 2.6.35

PATCH In review Tomoya MORINAGA 3 participants 4 messages Oct 22, 2010 GPIO

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 Topcliff: Update PCH_GPIO driver to 2.6.35

Hi Andrew Morton,

We want a GPIO maintainer to merge to 2.6.37.
We got "Reviewed-by" for this patch.
But I heard gpio tree is pretty much orphaned at the minute. Could you merge this patch to 2.6.37 ?

Thanks, Tomoya(OKI SEMICONDUCTOR CO., LTD.)
---
GPIO driver of Topcliff PCH

Topcliff PCH is the platform controller hub that is going to be used in
Intel's upcoming general embedded platform. All IO peripherals in
Topcliff PCH are actually devices sitting on AMBA bus. Topcliff PCH has GPIO I/F. Using this I/F, it is able to access system devices connected to GPIO.

---
 drivers/gpio/Kconfig    |    8 ++
 drivers/gpio/Makefile   |    1 +
 drivers/gpio/pch_gpio.c |  312 
+++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 321 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpio/pch_gpio.c
drivers/gpio/Kconfig +7 -0
index 7face91..f0876b1 100644
@@ -298,6 +298,14 @@ config GPIO_RDC321X
 	  Support for the RDC R321x SoC GPIOs over southbridge
 	  PCI configuration space.
 +config GPIO_PCH
+	tristate "PCH GPIO of Intel Topcliff"
+	depends on PCI
+	help
+	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
+	  which is an IOH(Input/Output Hub) for x86 embedded processor.
+	  This driver can access PCH GPIO device.
+
 comment "SPI GPIO expanders:"
  config GPIO_MAX7301
drivers/gpio/Makefile +1 -0
index e53dcff..a2ef754 100644
@@ -35,3 +35,4 @@ obj-$(CONFIG_GPIO_WM8994)	+= wm8994-gpio.o
 obj-$(CONFIG_GPIO_SCH)		+= sch_gpio.o
 obj-$(CONFIG_GPIO_RDC321X)	+= rdc321x-gpio.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= janz-ttl.o
+obj-$(CONFIG_GPIO_PCH)		+= pch_gpio.o
drivers/gpio/pch_gpio.c new file +312 -0

312 lines not on this page · raw message

Signature · 1 line
1.6.0.6
#1 lore raw

On Fri, 2010-10-22 at 14:51 +0900, Tomoya MORINAGA wrote:

Just trivia:

drivers/gpio/pch_gpio.c

Quoted 1 line
drivers/gpio/pch_gpio.c +0 -0

[]

drivers/gpio/pch_gpio.c line 288

Quoted 4 lines
drivers/gpio/pch_gpio.c +4 -0
+static const struct pci_device_id pch_gpio_pcidev_id[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803)},
+	{0,}
+};

DEFINE_PCI_DEVICE_TABLE

#2 lore raw
In reply to Tomoya MORINAGA
Quoted 4 lines · On Fri, 22 Oct 2010 14:51:57 +0900 Tomoya MORINAGA…

We want a GPIO maintainer to merge to 2.6.37.
We got "Reviewed-by" for this patch.
But I heard gpio tree is pretty much orphaned at the minute. Could you merge this patch to 2.6.37 ?

Sure. The patch was rather nastily space-stuffed and word-wrapped by your email client. I fixed that up. It otherwise looks OK to me.

#3 lore raw

Hi Andrew Morton,

Quoted 2 lines · Andrew Morton

Sure. The patch was rather nastily space-stuffed and word-wrapped by your email client. I fixed that up. It otherwise looks OK to me.

Thank you for your quick response and your fixing.

Thanks, Tomoya(OKI SEMICONDUCTOR CO., LTD.)