Source code of SMB2 Kernel module
Subsystems (2)
Dear.
Now, I try to use mount.smb2, which was posted at
http://archives.free.net.ph/message/20100507.172615.fda263bc.en.html
However, mount.smb2 was failed with error message.
mount error: smb2 filesystem not supported by the system
So, I need a source code of smb2 kernel module. (Test or experimental branch will do, because I know smb2
is not in mainline kernels.)
I tried to do
"git clone
http://www.kernel.org/home/ftp/pub/scm/linux/kernel/git/sfrench/smb2.git"
to find it failed.
Are there another git repository (or any patch) ?
Thanks.
Signature · 2 lines
------------------------------------- Shinnosuke Yagi
A message that is not in the archive (sent off-list or not yet received): 4CC65859.7040100-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 13 lines · Shinnosuke Yagi
Dear.
Now, I try to use mount.smb2, which was posted at
http://archives.free.net.ph/message/20100507.172615.fda263bc.en.htmlHowever, mount.smb2 was failed with error message.
mount error: smb2 filesystem not supported by the system
So, I need a source code of smb2 kernel module. (Test or experimental branch will do, because I know smb2
is not in mainline kernels.)
Quoted 7 lines
I tried to do
"git clone
http://www.kernel.org/home/ftp/pub/scm/linux/kernel/git/sfrench/smb2.git"
to find it failed.Are there another git repository (or any patch) ?
Try doing:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/smb2.git
Signature · 1 line
Suresh Jayaraman
A message that is not in the archive (sent off-list or not yet received): [email protected]
Thank you, Suresh.
I could get kernel source.
Then, I try to build with following SMB2 options.
==========================================
$ grep SMB2 .config CONFIG_SMB2_FS=y # CONFIG_SMB2_STATS is not set # CONFIG_SMB2_DEBUG2 is not set ==========================================
However, I failed to build and got a following error.
====================================================
$ make CHK include/linux/version.h CHK include/generated/utsrelease.h CALL scripts/checksyscalls.sh CHK include/generated/compile.h VDSOSYM arch/x86/vdso/vdso32-int80-syms.lds VDSOSYM arch/x86/vdso/vdso32-sysenter-syms.lds VDSOSYM arch/x86/vdso/vdso32-syms.lds LD arch/x86/vdso/built-in.o LD arch/x86/built-in.o LD fs/built-in.o ld: fs/cifs_common/built-in.o: No such file: No such file or directory make[1]: *** [fs/built-in.o] Error 1 make: *** [fs] Error 2 =====================================================
It seems that files in fs/cifs_common/ are lost.
In fact, fs/cifs_common is empty.
================================================================
$ ls -al fs/cifs_common/ 合計 16 drwxr-xr-x 2 xxxx xxxx 4096 2010-10-29 15:33 . drwxr-xr-x 74 xxxx xxxx 12288 2010-10-29 15:42 .. -rw-r--r-- 1 xxxx xxxx 0 2010-10-27 11:00 Makefile -rw-r--r-- 1 xxxx xxxx 0 2010-10-29 15:42 modules.order ================================================================
I also failed to bulid with no SMB2 options.
What should I do?
Thanks.
Quoted 27 lines · Suresh Jayaraman
Quoted 13 lines · Shinnosuke Yagi
Dear.
Now, I try to use mount.smb2, which was posted at
http://archives.free.net.ph/message/20100507.172615.fda263bc.en.htmlHowever, mount.smb2 was failed with error message.
mount error: smb2 filesystem not supported by the system
So, I need a source code of smb2 kernel module. (Test or experimental branch will do, because I know smb2
is not in mainline kernels.)Quoted 7 lines
I tried to do
"git clone
http://www.kernel.org/home/ftp/pub/scm/linux/kernel/git/sfrench/smb2.git"
to find it failed.Are there another git repository (or any patch) ?
Try doing:
git clone
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/smb2.git
Signature · 6 lines
------------------------------------- 八木 清之介 (ヤギ シンノスケ) NTTコムウェア株式会社 ネットワーク・ソリューション事業本部 yagi.shinnosuke-o7dWnD6vFTHqq2nvvmkE/[email protected] -------------------------------------
A message that is not in the archive (sent off-list or not yet received): 4CCA6FD3.4060907-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 16 lines · Shinnosuke Yagi
Thank you, Suresh.
I could get kernel source.
Then, I try to build with following SMB2 options.==========================================
$ grep SMB2 .config CONFIG_SMB2_FS=y # CONFIG_SMB2_STATS is not set # CONFIG_SMB2_DEBUG2 is not set ==========================================However, I failed to build and got a following error.
====================================================
Quoted 16 lines
$ make CHK include/linux/version.h CHK include/generated/utsrelease.h CALL scripts/checksyscalls.sh CHK include/generated/compile.h VDSOSYM arch/x86/vdso/vdso32-int80-syms.lds VDSOSYM arch/x86/vdso/vdso32-sysenter-syms.lds VDSOSYM arch/x86/vdso/vdso32-syms.lds LD arch/x86/vdso/built-in.o LD arch/x86/built-in.o LD fs/built-in.o ld: fs/cifs_common/built-in.o: No such file: No such file or directory make[1]: *** [fs/built-in.o] Error 1 make: *** [fs] Error 2 =====================================================
Just comment out the line
obj-$(CONFIG_CIFS_COMMON) += cifs_common/
in fs/Makefile and try. Seems Steve's fix is still missing in the smb2.git.
Signature · 1 line
Suresh Jayaraman
A message that is not in the archive (sent off-list or not yet received): [email protected]
Thank you, Suresh.
I succeeded in building kernel and mount SAMBA share with mount.smb2.
However, it seems that mount.smb2 works as cifs client (NOT works as SMB2 client).
Mount.smb2 doesn't offer to use SMB2 in it's SMB Negotiation Request. (Payload is the same as that of mount.cifs .)
From Windows Vista client, SMB2 works well, so server setting is valid.
Are there any mandatory settings (such as environment variables)
to run mount.smb2 as SMB2 client?
"cifs" is displayed in File system type field of mount output.
===================================================================
# mount.smb2 //server/share /mnt/smb2/ -o user=xxxx,pass=yyyy # mount ... //server/share on /mnt/smb2 type cifs (rw,mand) ===================================================================
Packet dump of SMB Negotioation packet of mount.smb2 is follow.
========================================================================
IP6 Client.57486 > Server.445: Flags [P.], seq 1:83, ack 1, win 90, options [nop,nop,TS val 5376161 ecr 758578309], length 82SMB PACKET: SMBnegprot (REQUEST)
0x0000: 6000 0000 0072 0640 2002 0192 0168 0001 `[email protected].. 0x0010: f6ce 46ff fe31 e4ca 2002 0192 0168 0001 ..F..1.......h.. 0x0020: 1aa9 05ff fec0 4fd1 e08e 01bd 2987 d46a ......O.....)..j 0x0030: 5e7d 0568 8018 005a d677 0000 0101 080a ^}.h...Z.w...... 0x0040: 0052 08a1 2d36 fc85 0000 004e ff53 4d42 .R..-6.....N.SMB 0x0050: 7200 0000 0000 01c0 0000 0000 0000 0000 r............... 0x0060: 0000 0000 0000 6d5b 0000 0100 002b 0002 ......m[.....+.. 0x0070: 4c4d 312e 3258 3030 3200 024c 414e 4d41 LM1.2X002..LANMA 0x0080: 4e32 2e31 0002 4e54 204c 4d20 302e 3132 N2.1..NT.LM.0.12 0x0090: 0002 504f 5349 5820 3200 ..POSIX.2.
========================================================================
Thanks.
Quoted 8 lines · Suresh Jayaraman
Just comment out the line
obj-$(CONFIG_CIFS_COMMON) += cifs_common/
in fs/Makefile and try. Seems Steve's fix is still missing in the smb2.git.
Signature · 6 lines
------------------------------------- 八木 清之介 (ヤギ シンノスケ) NTTコムウェア株式会社 ネットワーク・ソリューション事業本部 yagi.shinnosuke-o7dWnD6vFTHqq2nvvmkE/[email protected] -------------------------------------
A message that is not in the archive (sent off-list or not yet received): 4CCF5DF8.9030809-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 18 lines · Shinnosuke Yagi
Thank you, Suresh.
I succeeded in building kernel and mount SAMBA share with mount.smb2.
However, it seems that mount.smb2 works as cifs client (NOT works as SMB2 client).
Mount.smb2 doesn't offer to use SMB2 in it's SMB Negotiation Request. (Payload is the same as that of mount.cifs .)
From Windows Vista client, SMB2 works well, so server setting is valid.
Are there any mandatory settings (such as environment variables)
to run mount.smb2 as SMB2 client?
Quoted 8 lines
"cifs" is displayed in File system type field of mount output.
===================================================================# mount.smb2 //server/share /mnt/smb2/ -o user=xxxx,pass=yyyy # mount ... //server/share on /mnt/smb2 type cifs (rw,mand) ===================================================================
I'm assuming you are using the recent cifs-utils package which supports smb2.
Quoted 1 line
From where did you get mount.smb2? Is it a symlink to mount.cifs by any
chance?
Could you try
mount -t smb2 //server/share /mnt/point -o user=user1
--
Suresh Jayaraman
A message that is not in the archive (sent off-list or not yet received): [email protected]
Thank you, Suresh.
Quoted 2 lines
I'm assuming you are using the recent cifs-utils package which supports smb2.
Sorry, I didn't use newest one.
So, I updated cifs-util to version 4.7
===================================================
# mount.cifs -V mount.cifs version: 4.7 # mount.smb2 -V mount.cifs version: 4.7 ===================================================
Quoted 1 line
From where did you get mount.smb2? Is it a symlink to mount.cifs by any chance?
Yes, it is. I made symbolic link to mount.cifs manually.
===================================================
# ls -l /sbin/mount.smb2 lrwxrwxrwx 1 root root 10 2010-10-18 10:23 /sbin/mount.smb2 -> mount.cifs* ===================================================
Quoted 3 lines
Could you try
mount -t smb2 //server/share
/mnt/point-o user=user1
I tried and got another error.
Error massage is follow.
===================================================
# mount -t smb2 //server/share /mnt/point -o user=xxxx,pass=yyyy mount error: smb2 filesystem not supported by the system mount error(19): No such device Refer to the mount.smb2(8) manual page (e.g. man mount.smb2) ===================================================
I didn't got this message before I updated to cifs-util 4.7
I think this means that Kernel of my box is not support SMB2, is it right?
I built my kernel from git.kernel.org/pub/scm/linux/kernel/git/sfrench/smb2.git
Kernel parametrs about SMB2 are
===================================================
# grep SMB2 .config CONFIG_SMB2_FS=y CONFIG_SMB2_STATS=y CONFIG_SMB2_STATS2=y CONFIG_SMB2_DEBUG2=y ===================================================
Should I set any other parameters ?
Thanks.
Signature · 1 line
Shinnosuke Yagi
A message that is not in the archive (sent off-list or not yet received): 4CD35A27.4050605-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 50 lines · Shinnosuke Yagi
Thank you, Suresh.
Quoted 2 lines
I'm assuming you are using the recent cifs-utils package which supports smb2.
Sorry, I didn't use newest one.
So, I updated cifs-util to version 4.7===================================================
# mount.cifs -V mount.cifs version: 4.7 # mount.smb2 -V mount.cifs version: 4.7 ===================================================Quoted 2 lines
From where did you get mount.smb2? Is it a symlink to mount.cifs by any chance?
Yes, it is. I made symbolic link to mount.cifs manually.
===================================================
# ls -l /sbin/mount.smb2 lrwxrwxrwx 1 root root 10 2010-10-18 10:23 /sbin/mount.smb2 -> mount.cifs* ===================================================Quoted 3 lines
Could you try
mount -t smb2 //server/share
/mnt/point-o user=user1I tried and got another error.
Error massage is follow.
===================================================# mount -t smb2 //server/share /mnt/point -o user=xxxx,pass=yyyy mount error: smb2 filesystem not supported by the system mount error(19): No such device Refer to the mount.smb2(8) manual page (e.g. man mount.smb2) ===================================================I didn't got this message before I updated to cifs-util 4.7
I think this means that Kernel of my box is not support SMB2, is it right?
I built my kernel from git.kernel.org/pub/scm/linux/kernel/git/sfrench/smb2.git
Kernel parametrs about SMB2 are
===================================================
Quoted 8 lines
# grep SMB2 .config CONFIG_SMB2_FS=y CONFIG_SMB2_STATS=y CONFIG_SMB2_STATS2=y CONFIG_SMB2_DEBUG2=y ===================================================Should I set any other parameters ?
try a modprobe smb2 or insmod smb2.ko
Signature · 3 lines
Thanks, Steve
A message that is not in the archive (sent off-list or not yet received): AANLkTinm718oZX2Qc4++W_CYkv0+RZRwr09Uzu4zcDn0-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 4 lines
try a modprobe smb2 or insmod smb2.ko
I tried, but nothing changed.
=================================================================
# modprobe -v smb2 insmod /lib/modules/2.6.36-rc4+/kernel/fs/smb2/smb2.ko # mount -t smb2 //server/share /mnt/point -o user=xxxx Password: mount error: smb2 filesystem not supported by the system mount error(19): No such device Refer to the mount.smb2(8) manual page (e.g. man mount.smb2) typescript (END) =================================================================
I got the same result when I tried with kernel bulit-in parameters ( CONFIG_SMB2_FS=y ).
Do I have to install other modules?
Kernel and cifs-util versions are follow.
=================================================================
$ uname -a Linux hostname 2.6.36-rc4+ #5 SMP Fri Nov 5 11:25:48 JST 2010 i686 GNU/Linux # mount.smb2 -V mount.cifs version: 4.7 # grep -i smb2 /boot/config-2.6.36-rc4+ CONFIG_SMB2_FS=m CONFIG_SMB2_STATS=y CONFIG_SMB2_STATS2=y CONFIG_SMB2_DEBUG2=y =================================================================
----
Yagi Shinnosuke
A message that is not in the archive (sent off-list or not yet received): 4CD76751.8010700-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 18 lines · Shinnosuke Yagi
Quoted 4 lines
try a modprobe smb2 or insmod smb2.ko
I tried, but nothing changed.
=================================================================
# modprobe -v smb2 insmod /lib/modules/2.6.36-rc4+/kernel/fs/smb2/smb2.ko # mount -t smb2 //server/share /mnt/point -o user=xxxx Password: mount error: smb2 filesystem not supported by the system mount error(19): No such device Refer to the mount.smb2(8) manual page (e.g. man mount.smb2) typescript (END) =================================================================
Quoted 4 lines
I got the same result when I tried with kernel bulit-in parameters (
CONFIG_SMB2_FS=y).Do I have to install other modules?
Yes - you need fscache, I turned the equivalent of Suresh's cifs fscache (for smb2) on by default.
"modprobe fscache"
Signature · 3 lines
Thanks, Steve
A message that is not in the archive (sent off-list or not yet received): AANLkTimx3ukvAjmuf5KQ3dSLVhpaF51pXcOfS1E_iFhY-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 23 lines · Steve French
Quoted 21 lines · Shinnosuke Yagi
Quoted 4 lines
try a modprobe smb2 or insmod smb2.ko
I tried, but nothing changed.
=================================================================
# modprobe -v smb2 insmod /lib/modules/2.6.36-rc4+/kernel/fs/smb2/smb2.ko # mount -t smb2 //server/share /mnt/point -o user=xxxx Password: mount error: smb2 filesystem not supported by the system mount error(19): No such device Refer to the mount.smb2(8) manual page (e.g. man mount.smb2) typescript (END) =================================================================I got the same result when I tried with kernel bulit-in parameters (
CONFIG_SMB2_FS=y).
Quoted 7 lines
Quoted 1 line
Do I have to install other modules?
Yes - you need fscache, I turned the equivalent of Suresh's cifs fscache (for smb2) on by default.
"modprobe fscache"
I guess absence of fscache would result in a different error than this (perhaps invalid module format or something) and you won't be able to successfully load smb2 module itself..
But, you could verify whether the smb2 module is loaded successfully by doing
lsmod | grep smb2
Also check dmesg output for possible errors..
Signature · 1 line
Suresh Jayaraman
A message that is not in the archive (sent off-list or not yet received): [email protected]
Thank you, Suresh and Steve.
Fscache was loaded, but smb2 module was not loaded successfully. Nothing was displayed when I did
Quoted 1 line
lsmod | grep smb2
From Dmesg, following messages were displayed.
====================================================
FS-Cache: Netfs 'smb2' registered for caching
FS-Cache: Netfs 'smb2' unregistered from caching
====================================================
Does this means FS-Cache on this kernel doesn't support smb2?
Quoted 13 lines
I guess absence of fscache would result in a different error than this (perhaps invalid module format or something) and you won't be able to successfully load smb2 module itself..
But, you could verify whether the smb2 module is loaded successfully by doing
lsmod | grep smb2Also check dmesg output for possible errors..
A message that is not in the archive (sent off-list or not yet received): 4CD8C4E6.5080603-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 8 lines · Shinnosuke Yagi
Thank you, Suresh and Steve.
Fscache was loaded, but smb2 module was not loaded successfully. Nothing was displayed when I did
Quoted 2 lines
lsmod | grep smb2
Quoted 7 lines
From Dmesg, following messages were displayed.
====================================================
FS-Cache: Netfs 'smb2' registered for caching
FS-Cache: Netfs 'smb2' unregistered from caching
====================================================Does this means FS-Cache on this kernel doesn't support smb2?
That is probably not the problem. Seems like init_smb2 is failing.
Perhaps a problem registering the required key types.
You could enable debug messages to see if additional info is logged to dmesg
e.g.
stevef@stevef-laptop:~/smb2$ git diff -a
fs/smb2/smb2fs.c +1 -1
@@ -57,7 +57,7 @@ static struct quotactl_ops smb2_quotactl_ops;/* Definitions of various global variables follow */ -int smb2FYI; +int smb2FYI =1 ;int smb2ERROR =1 ;int trace_SMB2;
Alternatively you could add some logging (e.g. printk statements) to the error goto statements in this section of smb2fs.c (smb2_init)
rc = smb2_fscache_register();
if (rc)
goto out_clean_proc;
rc = smb2_init_inodecache();
if (rc)
goto out_unregister_fsc;
rc = smb2_init_mids();
if (rc)
goto out_destroy_inodecache;
rc = smb2_init_request_bufs();
if (rc)
goto out_destroy_mids;
rc = register_filesystem(&smb2_fs_type);
if (rc)
goto out_destroy_request_bufs;
rc = register_key_type(&smb2_spnego_key_type);Signature · 1 line
Thanks,
I added some logging messages.
====================================================
# git diff fs/smb2/smb2fs.c
fs/smb2/smb2fs.c +8 -3
@@ -57,7 +57,7 @@ static struct quotactl_ops smb2_quotactl_ops;/* Definitions of various global variables follow */ -int smb2FYI; +int smb2FYI =1 ;int smb2ERROR =1 ;int trace_SMB2;
@@ -1059,14 +1059,19 @@ init_smb2(void) goto out_destroy_inodecache; rc =smb2_init_request_bufs (); -if (rc) +sFYI (1 ,"smb2_init_request_bufs %d" , rc); +if (rc){ goto out_destroy_mids; + } rc =register_filesystem (&smb2_fs_type); -if (rc) +sFYI (1 ,"register_filesystem %d" , rc); +if (rc){ goto out_destroy_request_bufs; + } rc =register_key_type (&smb2_spnego_key_type); +sFYI (1 ,"register_key_type %d" , rc);if (rc) goto out_unregister_filesystem;
====================================================
I got following logs on dmesg.
====================================================
FS-Cache: Netfs 'smb2' registered for cachingfs/smb2/smb2fs.c: SMB2_max_buf_size 0x4000fs/smb2/smb2fs.c: smb2_init_request_bufs 0fs/smb2/smb2fs.c: register_filesystem 0fs/smb2/smb2fs.c: register_key_type -17
FS-Cache: Netfs 'smb2' unregistered from caching
====================================================
register_key_types returned -17 (EEXIST)
key "smb2" has already registered?
What should I do?
Quoted 58 lines · Steve French
Quoted 8 lines · Shinnosuke Yagi
Thank you, Suresh and Steve.
Fscache was loaded, but smb2 module was not loaded successfully. Nothing was displayed when I did
Quoted 2 lines
lsmod | grep smb2
Quoted 7 lines
From Dmesg, following messages were displayed.
====================================================
FS-Cache: Netfs 'smb2' registered for caching
FS-Cache: Netfs 'smb2' unregistered from caching
====================================================Does this means FS-Cache on this kernel doesn't support smb2?
That is probably not the problem. Seems like
init_smb2is failing.
Perhaps a problem registering the required key types.You could enable debug messages to see if additional info is logged to dmesg
e.g.
stevef@stevef-laptop:~/smb2$ git diff -afs/smb2/smb2fs.c +1
-1@@ -57,7 +57,7 @@ static struct quotactl_ops smb2_quotactl_ops;/* Definitions of various global variables follow */ -int smb2FYI; +int smb2FYI =1 ;int smb2ERROR =1 ;int trace_SMB2;Alternatively you could add some logging (e.g. printk statements) to the error goto statements in this section of
smb2fs.c(smb2_init)rc = smb2_fscache_register(); if (rc) goto out_clean_proc; rc = smb2_init_inodecache(); if (rc) goto out_unregister_fsc; rc = smb2_init_mids(); if (rc) goto out_destroy_inodecache; rc = smb2_init_request_bufs();
Quoted 11 lines
if (rc)
goto out_destroy_mids;
rc = register_filesystem(&smb2_fs_type);
if (rc)
goto out_destroy_request_bufs;
rc = register_key_type(&smb2_spnego_key_type);---------
A message that is not in the archive (sent off-list or not yet received): 4CDA4E5C.90004-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 17 lines · Shinnosuke Yagi
I added some logging messages.
# git diff fs/smb2/smb2fs.cfs/smb2/smb2fs.c +1
-1@@ -57,7 +57,7 @@ static struct quotactl_ops smb2_quotactl_ops;/* Definitions of various global variables follow */ -int smb2FYI; +int smb2FYI =1 ;int smb2ERROR =1 ;int trace_SMB2;
Quoted 7 lines
I got following logs on dmesg.
====================================================
FS-Cache: Netfs 'smb2' registered for cachingfs/smb2/smb2fs.c:SMB2_max_buf_size0x4000fs/smb2/smb2fs.c:smb2_init_request_bufs0fs/smb2/smb2fs.c:register_filesystem0fs/smb2/smb2fs.c:register_key_type-17
-17 is -EEXIST which means ket type with the name is already present. The below patch should fix the problem I think. Could you try and report back?
From: Suresh Jayaraman <[email protected]>
Subject: [PATCH] smb2: rename smb2 spnego key type
.. to avoid key registration failure. register_key_type() doesn't allow key types with same names.
--- fs/smb2/smb2_spnego.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
fs/smb2/smb2_spnego.c +1 -1
@@ -61,7 +61,7 @@ smb2_spnego_key_destroy(struct key *key)* keytype for SMB2 spnego keys */ struct key_type smb2_spnego_key_type = { - .name ="cifs.spnego" , + .name ="smb2.spnego" , .instantiate = smb2_spnego_key_instantiate, .match = user_match, .destroy = smb2_spnego_key_destroy,
A message that is not in the archive (sent off-list or not yet received): [email protected]
I patched and tried to mount again.
I mount successfully by smb2.
However, Kernel clashed when I accessed to mounted FS.
I couldn't got any logs, because I did not set kdump.
I will try to get a clashed kernel dump.
Please wait.
Thanks.
Quoted 64 lines · Suresh Jayaraman
Quoted 17 lines · Shinnosuke Yagi
I added some logging messages.
# git diff fs/smb2/smb2fs.cfs/smb2/smb2fs.c +1
-1@@ -57,7 +57,7 @@ static struct quotactl_ops smb2_quotactl_ops;/* Definitions of various global variables follow */ -int smb2FYI; +int smb2FYI =1 ;int smb2ERROR =1 ;int trace_SMB2;Quoted 7 lines
I got following logs on dmesg.
====================================================
FS-Cache: Netfs 'smb2' registered for cachingfs/smb2/smb2fs.c:SMB2_max_buf_size0x4000fs/smb2/smb2fs.c:smb2_init_request_bufs0fs/smb2/smb2fs.c:register_filesystem0fs/smb2/smb2fs.c:register_key_type-17-17 is
-EEXISTwhich means ket type with the name is already present. The below patch should fix the problem I think. Could you try and report back?From: Suresh Jayaraman<[email protected]>
Subject: [PATCH] smb2: rename smb2 spnego key type.. to avoid key registration failure.
register_key_type()doesn't allow key types with same names.Signed-off-by Suresh Jayaraman<[email protected]>--- fs/smb2/smb2_spnego.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)fs/smb2/smb2_spnego.c +1
-2@@ -61,7 +61,7 @@ smb2_spnego_key_destroy(struct key *key)* keytype for SMB2 spnego keys */ struct key_type smb2_spnego_key_type = { - .name ="cifs.spnego" , + .name ="smb2.spnego" , .instantiate = smb2_spnego_key_instantiate, .match = user_match, .destroy = smb2_spnego_key_destroy, --To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 6 lines
------------------------------------- 八木 清之介 (ヤギ シンノスケ) NTTコムウェア株式会社 ネットワーク・ソリューション事業本部 yagi.shinnosuke-o7dWnD6vFTHqq2nvvmkE/[email protected] -------------------------------------
A message that is not in the archive (sent off-list or not yet received): 4CDA5955.50409-o7dWnD6vFTHqq2nvvmkE/[email protected]
Quoted 6 lines · Shinnosuke Yagi
I patched and tried to mount again.
I mount successfully by smb2.
However, Kernel clashed when I accessed to mounted FS.
I got following messages through netconsole
when Kernel Oops was occuerd.
Kernel Opps occuerd when I execute
ls /mount/point
Client is Ubuntu 10.04 and cifs-util 4.7
Server is Ubuntu 10.04 and Samba 3.5.6
===============================================
BUG: unable to handle kernel
paging request at 75636573 IP:
[<c0501b08>] generic_getxattr+0x2c/0x6a
*pde = 00000000
Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent Modules linked in:
nls_utf8
smb2
ppdevrpcsec_gss_krb5auth_rpcgss
sunrpcsnd_hda_codec_realtek
netconsolesnd_hda_intel
tun
i915
configfssnd_hda_codecsnd_hwdep
bridgesnd_pcm_osssnd_mixer_osssnd_pcmsnd_seq_dummysnd_seq_osssnd_seq_mididrm_kms_helper
stp
llc
lpsnd_rawmidi
drmsnd_seq_midi_eventsnd_seqsnd_timersnd_seq_device
sndtpm_infineoni2c_algo_biti2c_corehp_wmiserio_raw
video
rfkill
soundcore
parport
wmi
outputsnd_page_alloc
e1000e
nbdata_genericpata_acpi
Pid: 1842, comm: ls Tainted: GW 2.6.36-rc4+ #1 3647h/HP Compaq 8000 Elite CMT PC
EIP: 0060:[<c0501b08>] EFLAGS: 00010282 CPU: 0
EIP is at generic_getxattr+0x2c/0x6a
EAX: edef9088 EBX: 75636573 ECX: 0000006f EDX: ee399e80
ESI: ee399e80 EDI: 00000000 EBP: ee399e50 ESP: ee399e38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process ls (pid: 1842, ti=ee398000 task=ee0e6500 task.ti=ee398000)
Stack:
fbf99dbcfbf9a6fc
75636573ee399e80c0501adcedef9088ee399e6cc050210a
00000000
00000000
00000017
00000000
00000000ee399f90c050250b
00000000
00000000edef9088
74737973702e6d657869736f6c63615f6363615f
00737365
Call Trace: [<c0501adc>] ? generic_getxattr+0x0/0x6a [<c050210a>] ? vfs_getxattr+0x79/0x82 [<c050250b>] ? getxattr+0x8f/0xea [<c04f41df>] ? path_to_nameidata+0x11/0x2a [<c04f5ec5>] ? link_path_walk+0x353/0x358 [<c04f4127>] ? mntput+0x13/0x15 [<c04f4127>] ? mntput+0x13/0x15 [<c04f58e3>] ? putname+0x25/0x2e [<c04f68e7>] ? user_path_at+0x42/0x5f [<c04f064c>] ? sys_lstat64+0x22/0x28 [<c05e0dfc>] ? _atomic_dec_and_lock+0x2c/0x44 [<c0502626>] ? sys_getxattr+0x36/0x49 [<c042709f>] ? sysenter_do_call+0x12/0x28 Code: 89 e5 57 89 cf 56 89 d6 53 83 ec 0c 8b 50 54 85 f6 8b 52 6c 75 2b eb 35 8b 13 89 5d e8 89 55 f0 89 f2 eb 04 ff 45 f0 42 8b 5d f0 unparseable log message: "<8a> "0b 84 c9 74 06 38 0a 74 ef eb 07 85 d2 8b 5d e8 75 1c 8b 55
EIP: [<c0501b08>]generic_getxattr+0x2c/0x6a
SS:ESP 0068:ee399e38
CR2: 0000000075636573
---[ end trace b00826b595f2760c ]---
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
===========================================================
Quoted 82 lines · Shinnosuke Yagi
I patched and tried to mount again.
I mount successfully by smb2.
However, Kernel clashed when I accessed to mounted FS.I couldn't got any logs, because I did not set kdump.
I will try to get a clashed kernel dump.
Please wait.
Thanks.
Quoted 65 lines · Suresh Jayaraman
Quoted 17 lines · Shinnosuke Yagi
I added some logging messages.
# git diff fs/smb2/smb2fs.cfs/smb2/smb2fs.c +1
-1@@ -57,7 +57,7 @@ static struct quotactl_ops smb2_quotactl_ops;/* Definitions of various global variables follow */ -int smb2FYI; +int smb2FYI =1 ;int smb2ERROR =1 ;int trace_SMB2;Quoted 7 lines
I got following logs on dmesg.
====================================================
FS-Cache: Netfs 'smb2' registered for cachingfs/smb2/smb2fs.c:SMB2_max_buf_size0x4000fs/smb2/smb2fs.c:smb2_init_request_bufs0fs/smb2/smb2fs.c:register_filesystem0fs/smb2/smb2fs.c:register_key_type-17-17 is
-EEXISTwhich means ket type with the name is already present. The below patch should fix the problem I think. Could you try and report back?From: Suresh Jayaraman<[email protected]>
Subject: [PATCH] smb2: rename smb2 spnego key type.. to avoid key registration failure.
register_key_type()doesn't allow key
types with same names.Signed-off-by Suresh Jayaraman<[email protected]>---
fs/smb2/smb2_spnego.c| 2 +-1 files changed, 1 insertions(+), 1 deletions(-)fs/smb2/smb2_spnego.c +1
-2@@ -61,7 +61,7 @@ smb2_spnego_key_destroy(struct key *key)* keytype for SMB2 spnego keys */ struct key_type smb2_spnego_key_type = { - .name ="cifs.spnego" , + .name ="smb2.spnego" , .instantiate = smb2_spnego_key_instantiate, .match = user_match, .destroy = smb2_spnego_key_destroy, --To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html