netlink stats: Ability to get stats for a single device?
Subsystems (2)
From what I can tell, it's impossible to request stats for a single network device via netlink. When you have thousands of interfaces, this means a lot of wasted effort to get stats for a particular device.
Am I missing something, or do I just need to write up a patch to have netlink pay attention to the ifindex?
Thanks,
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
Quoted 8 lines · Ben Greear
From what I can tell, it's impossible to request stats for a single network device via netlink. When you have thousands of interfaces, this means a lot of wasted effort to get stats for a particular device.
Am I missing something, or do I just need to write up a patch to have netlink pay attention to the ifindex?
Its already done
rtnl_register(PF_UNSPEC, RTM_GETLINK, rtnl_getlink, rtnl_dump_ifinfo);
David Miller
maintainerFrom: Ben Greear <[email protected]>
Date: Tue, 26 Oct 2010 12:31:12 -0700
Quoted 2 lines
Am I missing something, or do I just need to write up a patch to have netlink pay attention to the ifindex?
Setting the ->ifi_index or IFLA_IFNAME attribute values appropriately in the getlink request doesn't work?
That should give you back, amonst other things, the rtnl_link_stats for the device in the netlink response.
Quoted 6 lines · David Miller
From: Ben Greear <[email protected]>
Date: Tue, 26 Oct 2010 12:31:12 -0700Quoted 2 lines
Am I missing something, or do I just need to write up a patch to have netlink pay attention to the ifindex?
Quoted 6 lines
Setting the ->ifi_index or
IFLA_IFNAMEattribute values appropriately in the getlink request doesn't work?That should give you back, amonst other things, the
rtnl_link_statsfor the device in the netlink response.
--
Yep, it should be easy to change iproute2 to not ask a full dump in ip/ipaddress.c :
if (rtnl_wilddump_request(&rth, preferred_family, RTM_GETLINK) < 0) ...
and instead use rtnl_send() or something like that, if user provided one
specific interface name (or index)
ip link show dev eth0
Quoted 17 lines · Eric Dumazet
Quoted 6 lines · David Miller
From: Ben Greear<[email protected]>
Date: Tue, 26 Oct 2010 12:31:12 -0700Quoted 2 lines
Am I missing something, or do I just need to write up a patch to have netlink pay attention to the ifindex?
Quoted 6 lines
Setting the ->ifi_index or
IFLA_IFNAMEattribute values appropriately in the getlink request doesn't work?That should give you back, amonst other things, the
rtnl_link_statsfor the device in the netlink response.
--Yep, it should be easy to change iproute2 to not ask a full dump in
ip/ipaddress.c:
Quoted 6 lines
if (
rtnl_wilddump_request(&rth, preferred_family, RTM_GETLINK)< 0) ...and instead use
rtnl_send()or something like that, if user provided one
specific interface name (or index)ip link show dev eth0
I'm trying to craft my own netlink message...basically:
memset(&snl, 0, sizeof(snl)); snl.nl_family = AF_NETLINK; snl.nl_pid = 0; snl.nl_groups = 0; memset(&buffer, 0, sizeof(buffer)); nlh->nlmsg_type = msg_type; nlh->nlmsg_flags = NLM_F_MATCH|NLM_F_REQUEST; static unsigned int nl_seqno = 1; nlh->nlmsg_seq = nl_seqno++; nlh->nlmsg_pid = nl_pid;
nlh->nlmsg_len = NLMSG_LENGTH(sizeof(*ifinfomsg));
ifinfomsg = (struct ifinfomsg*)(NLMSG_DATA(nlh));
ifinfomsg->ifi_family = AF_UNSPEC;
ifinfomsg->ifi_type = IFLA_UNSPEC;
ifinfomsg->ifi_index = if_index;
ifinfomsg->ifi_flags = 0;
ifinfomsg->ifi_change = 0xffffffff;It's possible that I'm somehow messing this up. But, looking at the static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) method, I cannot see how it would bail out properly after a single dev has been processed, either.
Thanks,
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
Quoted 10 lines · Ben Greear
I'm trying to craft my own netlink message...basically:
memset(&snl, 0, sizeof(snl)); snl.nl_family = AF_NETLINK; snl.nl_pid = 0; snl.nl_groups = 0; memset(&buffer, 0, sizeof(buffer)); nlh->nlmsg_type = msg_type; nlh->nlmsg_flags = NLM_F_MATCH|NLM_F_REQUEST;
dont use F_MATCH : check net/core/rtnetlink.c
vi +1660 net/core/rtnetlink.c
You _dont_ want to call 'dumpit' : so dont use a bit present in NLM_F_DUMP at all:
if (kind == 2 && nlh->nlmsg_flags&NLM_F_DUMP) {
struct sock *rtnl;
rtnl_dumpit_func dumpit;
dumpit = rtnl_get_dumpit(family, type);
if (dumpit == NULL)
return -EOPNOTSUPP;
__rtnl_unlock();
rtnl = net->rtnl;
err = netlink_dump_start(rtnl, skb, nlh, dumpit, NULL);
rtnl_lock();
return err;
}You want instead to call the 'doit' handler (one device only)
doit = rtnl_get_doit(family, type);
if (doit == NULL)
return -EOPNOTSUPP;
return doit(skb, nlh, (void *)&rta_buf[0]);Quoted 13 lines · Eric Dumazet
Quoted 10 lines · Ben Greear
I'm trying to craft my own netlink message...basically:
memset(&snl, 0, sizeof(snl)); snl.nl_family = AF_NETLINK; snl.nl_pid = 0; snl.nl_groups = 0; memset(&buffer, 0, sizeof(buffer)); nlh->nlmsg_type = msg_type; nlh->nlmsg_flags = NLM_F_MATCH|NLM_F_REQUEST;
Quoted 6 lines
dont use
F_MATCH: checknet/core/rtnetlink.cvi +1660
net/core/rtnetlink.cYou _dont_ want to call 'dumpit' : so dont use a bit present in
NLM_F_DUMPat all:
That was exactly my problem. It works as expected with that NLM_F_MATCH removed.
Thanks!
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com