Skip to contentSkip to conversation

Fixing tbs-nec table after converting to cx88 driver ir-core

DISCUSSION Mariusz Bialonczyk 1 participant 2 messages Nov 12, 2010 – Nov 15, 2010 11 messages not in the archive

Subsystems (3)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#11 lore raw

Hello
I am using Prof 7301 PCI card.
After converting cx88 driver to ir-core (thank you very much for your work, David) the table rc-tbs-nec (for bundled remote) has incorrect values.
I was comparing the results and there is a regularity (constant offset):
If i add 0x80 (128 decimal) value to every code in rc-tbs-nec.c then original remote gives correct EV_KEY events (just like before cx88 conversion) :)
Despite the fact that my IR receiver is now able to work with many remotes it is still using standard remote which is in mentioned table, so I think that we should correct the table to have it correct, what do you think?

I also need to mention that the table is incomplete. Please have a look at remote:
http://www.prof-tuners.com/eng/images/review/review_prof_7301/prof_7301_6.jpg

As you can see there are two buttons (10+ and 10-), which the table doesn't take into account. Correct me if i'm wrong, but i believe it
means: 10 channels up, and 10 channels down.
So my proposition is to add new definitions for this buttons.
Maybe: KEY_10CHANNELSUP and KEY_10CHANNELSDOWN, what do you think? Unfortunately I can't test the button meaning, because i don't have windows at home computer with original software for the card.

I can provide full and fixed rc-tbs-nec table patch then.

regards,

Signature · 3 lines
Mariusz Bialonczyk
jabber/e-mail: [email protected]
http://manio.skyboo.net
#12 lore raw

[PATH] Fix rc-tbs-nec table after converting the cx88 driver to ir-core

The patch fixes the rc-tbs-nec table after converting drivers/media/video/cx88 to ir-core
(commit ba7e90c9f878e0ac3c0614a5446fe5c62ccc33ec).

It is also adds two missing buttons (10- and 10+) with its definition (KEY_10CHANNELSUP and KEY_10CHANNELSDOWN).

---
 drivers/media/rc/keymaps/rc-tbs-nec.c |   66 +++++++++++++++++----------------
 include/linux/input.h                 |    2 +
 2 files changed, 36 insertions(+), 32 deletions(-)
drivers/media/rc/keymaps/rc-tbs-nec.c +34 -32
index 3309631..9a1d9a3 100644
@@ -13,38 +13,40 @@
 #include <media/rc-map.h>
 
 static struct ir_scancode tbs_nec[] = {
-	{ 0x04, KEY_POWER2},	/*power*/
-	{ 0x14, KEY_MUTE},	/*mute*/
-	{ 0x07, KEY_1},
-	{ 0x06, KEY_2},
-	{ 0x05, KEY_3},
-	{ 0x0b, KEY_4},
-	{ 0x0a, KEY_5},
-	{ 0x09, KEY_6},
-	{ 0x0f, KEY_7},
-	{ 0x0e, KEY_8},
-	{ 0x0d, KEY_9},
-	{ 0x12, KEY_0},
-	{ 0x16, KEY_CHANNELUP},	/*ch+*/
-	{ 0x11, KEY_CHANNELDOWN},/*ch-*/
-	{ 0x13, KEY_VOLUMEUP},	/*vol+*/
-	{ 0x0c, KEY_VOLUMEDOWN},/*vol-*/
-	{ 0x03, KEY_RECORD},	/*rec*/
-	{ 0x18, KEY_PAUSE},	/*pause*/
-	{ 0x19, KEY_OK},	/*ok*/
-	{ 0x1a, KEY_CAMERA},	/* snapshot */
-	{ 0x01, KEY_UP},
-	{ 0x10, KEY_LEFT},
-	{ 0x02, KEY_RIGHT},
-	{ 0x08, KEY_DOWN},
-	{ 0x15, KEY_FAVORITES},
-	{ 0x17, KEY_SUBTITLE},
-	{ 0x1d, KEY_ZOOM},
-	{ 0x1f, KEY_EXIT},
-	{ 0x1e, KEY_MENU},
-	{ 0x1c, KEY_EPG},
-	{ 0x00, KEY_PREVIOUS},
-	{ 0x1b, KEY_MODE},
+	{ 0x84, KEY_POWER2},		/* power */
+	{ 0x94, KEY_MUTE},		/* mute */
+	{ 0x87, KEY_1},
+	{ 0x86, KEY_2},
+	{ 0x85, KEY_3},
+	{ 0x8b, KEY_4},
+	{ 0x8a, KEY_5},
+	{ 0x89, KEY_6},
+	{ 0x8f, KEY_7},
+	{ 0x8e, KEY_8},
+	{ 0x8d, KEY_9},
+	{ 0x92, KEY_0},
+	{ 0xc0, KEY_10CHANNELSUP},	/* 10+ */
+	{ 0xd0, KEY_10CHANNELSDOWN},	/* 10- */
+	{ 0x96, KEY_CHANNELUP},		/* ch+ */
+	{ 0x91, KEY_CHANNELDOWN},	/* ch- */
+	{ 0x93, KEY_VOLUMEUP},		/* vol+ */
+	{ 0x8c, KEY_VOLUMEDOWN},	/* vol- */
+	{ 0x83, KEY_RECORD},		/* rec */
+	{ 0x98, KEY_PAUSE},		/* pause, yellow */
+	{ 0x99, KEY_OK},		/* ok */
+	{ 0x9a, KEY_CAMERA},		/* snapshot */
+	{ 0x81, KEY_UP},
+	{ 0x90, KEY_LEFT},
+	{ 0x82, KEY_RIGHT},
+	{ 0x88, KEY_DOWN},
+	{ 0x95, KEY_FAVORITES},		/* blue */
+	{ 0x97, KEY_SUBTITLE},		/* green */
+	{ 0x9d, KEY_ZOOM},
+	{ 0x9f, KEY_EXIT},
+	{ 0x9e, KEY_MENU},
+	{ 0x9c, KEY_EPG},
+	{ 0x80, KEY_PREVIOUS},		/* red */
+	{ 0x9b, KEY_MODE},
 };
 
 static struct rc_keymap tbs_nec_map = {
include/linux/input.h +2 -0
index 51af441..711c1307 100644
@@ -623,6 +623,8 @@ struct input_keymap_entry {
 
 #define KEY_CAMERA_FOCUS	0x210
 #define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
+#define KEY_10CHANNELSUP        0x212   /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN      0x213   /* 10 channels down (10-) */
 
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
Signature · 3 lines
Mariusz Białończyk
jabber/e-mail: [email protected]
http://manio.skyboo.net