PROBLEM: linux kernel 2.6.35.7 R6040 network driver messages
Hi!
I haven't reported kernel bug until now. I'll try to send as much information as I can. I hope it is sufficient.
1. I see repeating (flood) messages "Oct 27 13:14:59 mclive5 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1" in my syslog - once per second.
2. Frequency is probably one message per second because I see this on every 61 seconds: "last message repeated 61 times". I'm not sure if the problem is in the driver or in OS because I use Centos 5.5 with newer kernel, but I don't have the same problem with other network adapters. R6040 is build into kernet, not as a module.
3. keywords: modules, networking, kernel, problem, linkup, syslog, r6040, MicroClient JrMX
4. kernel version - # cat /proc/version
Linux version 2.6.35.7-ns.i586 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #15 Thu Oct 21 18:26:55 CEST 2010
SMP is disabled
5.
6. The problem is always presend. doesn't have to trigger it. only bring interface up:
ifconfig eth0 up
7.1 Operating system is Centos 5.5 without updates. it's run as livecd (my own modification). initrd is completely rewritten - it uses bash for init script. init script just mounts the filesystem and ends with:
exec chroot . /bin/bash <<- EOF >/dev/console
echo "running init"
exec /sbin/init $level
EOF
root filesystem is AUFS that consists of:
one squashfs image
one tmpfs ram disk with size=200M
7.2. processor info:
Processor is Xcore86 MX at 1 GHz and it is i586 compatible /proc/cpu reports Vortex86 SoC
flags : fpu tsc cx8
7.3 module information:
# cat /proc/modules ipv6 216009 16 - Live 0xe08ba000 hidp 9827 2 - Live 0xe086b000 l2cap 33993 5 hidp, Live 0xe0875000 crc16 995 1 l2cap, Live 0xe085d000 bluetooth 46244 2 hidp,l2cap, Live 0xe0842000 rfkill 7982 1 bluetooth, Live 0xe0824000 tun 12103 0 - Live 0xe0979000 dm_mirror 11560 0 - Live 0xe0967000 dm_region_hash 5376 1 dm_mirror, Live 0xe0957000 dm_log 7531 2 dm_mirror,dm_region_hash, Live 0xe094a000 dm_multipath 14155 0 - Live 0xe092e000 scsi_dh 3972 1 dm_multipath, Live 0xe091f000 dm_mod 52849 3 dm_mirror,dm_log,dm_multipath, Live 0xe0903000 option 12594 0 - Live 0xe08b4000 usb_wwan 6820 1 option, Live 0xe0899000 serio_raw 3328 0 - Live 0xe088c000 rtc_cmos 7326 0 - Live 0xe0880000 rtc_core 10393 1 rtc_cmos, Live 0xe0870000 pcspkr 1279 0 - Live 0xe0857000 rtc_lib 1477 1 rtc_core, Live 0xe0861000
7.4 Loaded driver and hardware information
# cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0071 : rtc_cmos 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:0c.0 0170-0177 : pata_rdc 01f0-01f7 : 0000:00:0c.0 01f0-01f7 : pata_rdc 02e8-02ef : serial 0376-0376 : 0000:00:0c.0 0376-0376 : pata_rdc 03c0-03df : vga+ 03e8-03ef : serial 03f6-03f6 : 0000:00:0c.0 03f6-03f6 : pata_rdc 03f8-03ff : serial 0cf8-0cff : PCI conf1 de00-deff : 0000:00:08.0 de00-deff : r6040 df80-dfff : 0000:00:0d.0 ef00-ef0f : 0000:00:0c.0 ef00-ef0f : pata_rdc
# cat /proc/iomem 00000000-00000fff : reserved 00001000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000e4000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-1fffffff : System RAM 00400000-007c990c : Kernel code 007c990d-0095d2d7 : Kernel data 009c1000-00a40e37 : Kernel bss f8000000-fbffffff : 0000:00:0d.0 febc0000-febcffff : 0000:00:08.0 febd9000-febd9fff : 0000:00:0a.0 febd9000-febd9fff : ohci_hcd febda000-febdafff : 0000:00:0b.0 febda000-febdafff : ohci_hcd febdb400-febdb4ff : 0000:00:08.0 febdb400-febdb4ff : r6040 febdb800-febdb8ff : 0000:00:0a.1 febdb800-febdb8ff : ehci_hcd febdbc00-febdbcff : 0000:00:0b.1 febdbc00-febdbcff : ehci_hcd febdc000-febdffff : 0000:00:0e.0 febe0000-febfffff : 0000:00:0d.0 ff000000-ffffffff : reserved
7.5 PCI info:
# lspci -vvv
00:00.0 Host bridge: RDC Semiconductor, Inc. R6021 Host Bridge (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 000:07.0 ISA bridge: RDC Semiconductor, Inc. Unknown device 6036
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=?? >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:08.0 Ethernet controller: RDC Semiconductor, Inc. R6040 MAC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at de00 [size=256]
Region 1: Memory at febdb400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at febc0000 [disabled] [size=64K]00:0a.0 USB Controller: RDC Semiconductor, Inc. R6060 USB 1.1 Controller (rev 12) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at febd9000 (32-bit, non-prefetchable) [size=4K]
00:0a.1 USB Controller: RDC Semiconductor, Inc. R6061 USB 2.0 Controller (rev 03) (prog-if 20 [EHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, Cache Line Size: 16 bytes
Interrupt: pin B routed to IRQ 3
Region 0: Memory at febdb800 (32-bit, non-prefetchable) [size=256]
00:0b.0 USB Controller: RDC Semiconductor, Inc. R6060 USB 1.1 Controller (rev 12) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at febda000 (32-bit, non-prefetchable) [size=4K]
00:0b.1 USB Controller: RDC Semiconductor, Inc. R6061 USB 2.0 Controller (rev 03) (prog-if 20 [EHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, Cache Line Size: 16 bytes
Interrupt: pin B routed to IRQ 3
Region 0: Memory at febdbc00 (32-bit, non-prefetchable) [size=256]
00:0c.0 IDE interface: RDC Semiconductor, Inc. Unknown device 1011 (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: RDC Semiconductor, Inc. Unknown device 1011
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ef00 [size=16]00:0d.0 VGA compatible controller: RDC Semiconductor, Inc. Unknown device 2010 (prog-if 00 [VGA controller])
Subsystem: RDC Semiconductor, Inc. Unknown device 2010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Region 1: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at df80 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Audio device: RDC Semiconductor, Inc. Unknown device 3010 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at febdc000 (32-bit, non-prefetchable) [size=16K]
7.6 SCSI info
# cat /proc/scsi/scsi Attached devices: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD1600BEVT-0 Rev: 11.0 Type: Direct-Access ANSI SCSI revision: 05
7.7 Other information that might be relevant to the problem
can't think of
8. Other notes, patches, fixes, workarounds
AUFS patch was added to kernel 2.6.35.7
no other patches to kernel
hardware is: http://www.norhtec.com/products/mcjrmx/index.html, but it's not documented very well.
RAM: 512
I had similar problems with kernel 2.6.29 (not absolutely sure about the version) and another hardware (i486 compatible - XCore86 DX CPU on a Microclient JrDX), but the messages were output to the console and were a lot faster - few messages per second.
Good Luck!
Signature · 3 lines
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.