Skip to contentSkip to conversation

bind-mount vs second mount of the same blockdev?

DISCUSSION Michael Tokarev 2 participants 2 messages Nov 3, 2010

lore
Share & tools
lore
#0 lore raw

Hello.

I'm trying to understand the differences between a bind-mount of a whole filesystem versus mounting the same block device the second time. Like this:

mount -t ext3 /dev/block /mnt/a
mount --bind /mnt/a /mnt/b

versus

mount -t ext3 /dev/block /mnt/a
mount -t ext3 /dev/block /mnt/b

In the second case, second mount does not happen but the first one is "reused" instead - this is visible in dmesg, since only once ext3fs prints a note about the mounting.

Now, the first case is quite clear: we've one fs visible in two places, pretty much like two hard- links to the same file. So things like, for example, fcntl locking will work "from" both ends. But it is not that obvious in the second case, even if we clearly have some common "inode" in this case too.

What are the differences in behavour?

Thanks!

/mjt

#1 lore raw
Quoted 7 lines · Michael Tokarev

mount -t ext3 /dev/block /mnt/a
mount --bind /mnt/a /mnt/b

versus

mount -t ext3 /dev/block /mnt/a
mount -t ext3 /dev/block /mnt/b

[snip]

Quoted 1 line

What are the differences in behavour?

None. Both lead to the identical states.