scsi.h: Make exported header exportable

index 216af85..b217c7c 100644
@@ -10,39 +10,6 @@
 
 #include <linux/types.h>
 
-struct scsi_cmnd;
-
-/*
- * The maximum number of SG segments that we will put inside a
- * scatterlist (unless chaining is used). Should ideally fit inside a
- * single page, to avoid a higher order allocation.  We could define this
- * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order.  The
- * minimum value is 32
- */
-#define SCSI_MAX_SG_SEGMENTS	128
-
-/*
- * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
- * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
- */
-#ifdef ARCH_HAS_SG_CHAIN
-#define SCSI_MAX_SG_CHAIN_SEGMENTS	2048
-#else
-#define SCSI_MAX_SG_CHAIN_SEGMENTS	SCSI_MAX_SG_SEGMENTS
-#endif
-
-/*
- * DIX-capable adapters effectively support infinite chaining for the
- * protection information scatterlist
- */
-#define SCSI_MAX_PROT_SG_SEGMENTS	0xFFFF
-
-/*
- * Special value for scanning to specify scanning or rescanning of all
- * possible channels, (target) ids, or luns on a given shost.
- */
-#define SCAN_WILD_CARD	~0
-
 /*
  *      SCSI opcodes
  */

@@ -173,16 +140,6 @@ scsi_varlen_cdb_length(const void *hdr)
 	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
 }
 
-extern const unsigned char scsi_command_size_tbl[8];
-#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
-
-static inline unsigned
-scsi_command_size(const unsigned char *cmnd)
-{
-	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
-		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
-}
-
 /*
  *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
  *  T10/1561-D Revision 4 Draft dated 7th November 2002.

@@ -298,9 +255,6 @@ enum scsi_protocol {
 	SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
 };
 
-/* Returns a human-readable name for the device */
-extern const char * scsi_device_type(unsigned type);
-
 /*
  * standard mode-select header prepended to all mode-select commands
  */

@@ -526,4 +480,55 @@ static inline __u32 scsi_to_u32(__u8 *ptr)
 	return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
 }
 
+
+#ifdef __KERNEL__
+
+struct scsi_cmnd;
+
+/*
+ * The maximum number of SG segments that we will put inside a
+ * scatterlist (unless chaining is used). Should ideally fit inside a
+ * single page, to avoid a higher order allocation.  We could define this
+ * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order.  The
+ * minimum value is 32
+ */
+#define SCSI_MAX_SG_SEGMENTS	128
+
+/*
+ * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
+ * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
+ */
+#ifdef ARCH_HAS_SG_CHAIN
+#define SCSI_MAX_SG_CHAIN_SEGMENTS	2048
+#else
+#define SCSI_MAX_SG_CHAIN_SEGMENTS	SCSI_MAX_SG_SEGMENTS
+#endif
+
+/*
+ * DIX-capable adapters effectively support infinite chaining for the
+ * protection information scatterlist
+ */
+#define SCSI_MAX_PROT_SG_SEGMENTS	0xFFFF
+
+/*
+ * Special value for scanning to specify scanning or rescanning of all
+ * possible channels, (target) ids, or luns on a given shost.
+ */
+#define SCAN_WILD_CARD	~0
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+/* Returns a human-readable name for the device */
+extern const char *scsi_device_type(unsigned type);
+
+#endif /* __KERNEL__ */
+
 #endif /* _SCSI_SCSI_H */

index 505ffe3..ef63142 100644
@@ -25,6 +25,7 @@
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 
 #include "sas_internal.h"
 

@@ -545,10 +546,10 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
 	if (!res)
 		goto out;
 
-	phy->invalid_dword_count = scsi_to_u32(&resp[12]);
-	phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
-	phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
-	phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
+	phy->invalid_dword_count = get_unaligned_be32(&resp[12]);
+	phy->running_disparity_error_count = get_unaligned_be32(&resp[16]);
+	phy->loss_of_dword_sync_count = get_unaligned_be32(&resp[20]);
+	phy->phy_reset_problem_count = get_unaligned_be32(&resp[24]);
 
  out:
 	kfree(resp);

index b217c7c..67ce303 100644
@@ -474,13 +474,6 @@ static inline int scsi_is_wlun(unsigned int lun)
 /* Used to obtain the PCI location of a device */
 #define SCSI_IOCTL_GET_PCI		0x5387
 
-/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
-static inline __u32 scsi_to_u32(__u8 *ptr)
-{
-	return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
-}
-
-
 #ifdef __KERNEL__
 
 struct scsi_cmnd;