ARMV7: S5P: timer: get the count_value from register when call udelay
PATCH 1/1 ARMV7: S5P: timer: get the count_value from register when call udelay
Because of count_value is set to tcnb4 register, should be get from this register when call udelay function.
Signed-off-by Minkyu Kang <[email protected]>
--- arch/arm/cpu/armv7/s5p-common/timer.c | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-)
arch/arm/cpu/armv7/s5p-common/timer.c +9 -9
@@ -65,15 +65,12 @@ int timer_init(void)writel ((PRESCALER_1 &0xff ) <<8 , &timer->tcfg0);writel ((MUX_DIV_2 &0xf ) <<MUX4_DIV_SHIFT , &timer->tcfg1); -if (count_value ==0 ) { -/* reset initial value */ -/* count_value = 2085937.5(HZ) (per 1 sec)*/ - count_value =get_pwm_clk () / ((PRESCALER_1 +1 ) * - (MUX_DIV_2 +1 )); - -/* count_value / 100 = 20859.375(HZ) (per 10 msec) */ - count_value = count_value /100 ; - } +/* count_value = 2085937.5(HZ) (per 1 sec)*/ + count_value =get_pwm_clk () / ((PRESCALER_1 +1 ) * + (MUX_DIV_2 +1 )); + +/* count_value / 100 = 20859.375(HZ) (per 10 msec) */ + count_value = count_value /100 ;/* set count value */ writel (count_value, &timer->tcntb4);
@@ -114,8 +111,11 @@ void set_timer(unsigned long t)/* delay x useconds */ void __udelay (unsigned long usec) { +struct s5p_timer *const timer =s5p_get_base_timer ();unsigned long tmo, tmp; + count_value =readl (&timer->tcntb4); +if (usec >=1000 ) {/* * if "big" number, spread normalization
Signature · 1 line
1.7.0.4
PATCH 1/1 ARMV7: S5P: timer: get the count_value from register when call udelay
Quoted 8 lines · Minkyu Kang
Because of
count_valueis set to tcnb4 register, should be get from this register when call udelay function.Signed-off-by Minkyu Kang <[email protected]>---
?arch/arm/cpu/armv7/s5p-common/timer.c | ? 18 +++++++++--------- ?1 files changed, 9 insertions(+), 9 deletions(-)
applied to u-boot-samsung
Signature · 2 lines
from. prom. www.promsoft.net