USB: g_serial: Allow to override the default VID/PID
PATCH 1/1 USB: g_serial: Allow to override the default VID/PID
In reply to a message not in the archiveOverride the default VID/PID if custom values are supplied through the idVendor and idProduct kernel module parameters.
--- drivers/usb/gadget/serial.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
drivers/usb/gadget/serial.c +5 -0
@@ -271,6 +271,11 @@ static int __init init(void) } strings_dev[STRING_DESCRIPTION_IDX ].s = serial_config_driver.label; +if (idVendor) + device_desc.idVendor = idVendor; +if (idProduct) + device_desc.idProduct = idProduct; +return usb_composite_register (&gserial_driver); }module_init (init);
Signature · 1 line
1.7.1
Quoted 4 lines · Jef Driesen
Override the default VID/PID if custom values are supplied through the idVendor and idProduct kernel module parameters.
Signed-off-by Jef Driesen <[email protected]>
So this patch resolves the bug found in 1ab83238740ff1e1773d5c13ecac43c60cf4aec4 which showed up in .35-rc1, right?
Robert, any objection to this as it was your patch that broke things?
thanks,
greg k-h
Quoted 27 lines
--- drivers/usb/gadget/serial.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)drivers/usb/gadget/serial.c +5
-0@@ -271,6 +271,11 @@ static int __init init(void) } strings_dev[STRING_DESCRIPTION_IDX ].s = serial_config_driver.label; +if (idVendor) + device_desc.idVendor = idVendor; +if (idProduct) + device_desc.idProduct = idProduct; +return usb_composite_register (&gserial_driver); }module_init (init);Signature · 6 lines
1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 9 lines · Greg KH
Quoted 4 lines · Jef Driesen
Override the default VID/PID if custom values are supplied through the idVendor and idProduct kernel module parameters.
Signed-off-by Jef Driesen<[email protected]>So this patch resolves the bug found in
1ab83238740ff1e1773d5c13ecac43c60cf4aec4which showed up in .35-rc1, right?
Yes, although I'm really sure it is the best way to fix the problem. The way I understand this code is that before that commit, the idVendor/idProduct/bcdDevice module parameters where set after the bind(). Thus whatever was set as the default there got replaced with the values of the module parameters. Exactly what I would consider the correct behavior. After the commit, they get set before bind(), where they are changed back to the hardcoded values, which I think is wrong. My patch sets them back to the right values, but maybe it makes more sense to not set the default values in the first place (if there are already values in place of course). But I didn't knew how to accomplish that.
There might be similar problems for the other gadget drivers as well. I haven't checked that.
Quoted 22 lines
Quoted 22 lines
--- drivers/usb/gadget/serial.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)drivers/usb/gadget/serial.c +5
-1@@ -271,6 +271,11 @@ static int __init init(void) } strings_dev[STRING_DESCRIPTION_IDX ].s = serial_config_driver.label; +if (idVendor) + device_desc.idVendor = idVendor; +if (idProduct) + device_desc.idProduct = idProduct; +return usb_composite_register (&gserial_driver); }module_init (init); --1.7.1
Hi,
I just revisited the patch I submitted and I can see that it needs fixing. The intention of the patch was to provide the idVendor & idProduct kernel module parameter overrides to the individual functions at 'bind()' time. Prior to the patch, the overrides were done after the bind, making it hard for individual functions to determine the correct value for idVendor (some functions may need to use that value, e.g. USB audio when it registers itself as an ALSA device; it would want to use the same Vendor id).
The patch makes sure that that happens, however, right after the bind() the patched values are lost due to the copying of the gadget specific device descriptor. Here's the snippet from 2.6.34:
999 usb_gadget_set_selfpowered(gadget);
1000
1001 /* interface and string IDs start at zero via kzalloc.
1002 * we force endpoints to start unassigned; few controller 1003 * drivers will zero ep->driver_data. 1004 */ 1005 usb_ep_autoconfig_reset(cdev->gadget); 1006 1007 /* composite gadget needs to assign strings for whole device (like 1008 * serial number), register function drivers, potentially update 1009 * power state and consumption, etc 1010 */
1011 status = composite->bind(cdev);
1012 if (status < 0)
1013 goto fail;
1014
1015 cdev->desc = *composite->dev;
1016 cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1017
1018 /* standardized runtime overrides for device ID data */
1019 if (idVendor)
1020 cdev->desc.idVendor = cpu_to_le16(idVendor);
1021 if (idProduct)
1022 cdev->desc.idProduct = cpu_to_le16(idProduct);
1023 if (bcdDevice)
1024 cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
1025
In line 1015, the composite device descriptor is copied to the cdev->desc field. Then the values get patched.
My patch just moved lines 1018-1024, so that the functions could access the patched values. The ill side effect is that these patched values are lost when the *composite->dev (== device descriptor) is copied in line 1015.
It would seem that the patch should also have moved lines 1015-1016 in front of the composite->bind(cdev) call.
It would require all composite gadgets (such as serial.c) and all functions (such as f_acm.c) to do any modifications to the device descriptor as passed to them in the 'bind' call. For functions that is natural, as they should be unaware of the gadget that uses them.
The composite gadgets such as 'serial' seem to deal with it differently. The serial.c gadget refers to the device descriptor as 'device_desc', and it is a static struct. It references it in its 'init' function (which is ok, it is prior to the registration point) and in the gs_bind() call. At that point it should probably not be using 'device_desc', but cdev->desc.
I think we can go one of two ways. I'd be happy to go over the composite gadgets and change their use of their device descriptors, such that they use cdev->desc at bind() time. Combining that with the moving the copying of the *composite->dev to before calling 'composite->bind()' would make things consistent.
The other way is reverting my original patch. For those functions that need access to the overridden idVendor/idProduct code, we'll need to work out another (generic) solution.
Robert
Quoted 61 lines
-----Original Message-----
From: Jef Driesen [mailto:[email protected]]
Sent: Sunday, November 21, 2010 12:03 AM
To: Greg KH
Cc: Robert Lukassen; David Brownell; Greg Kroah-Hartman; [email protected]; [email protected]
Subject: Re: [PATCH] USB:g_serial: Allow to override the default VID/PIDQuoted 8 lines · Greg KH
Quoted 4 lines · Jef Driesen
Override the default VID/PID if custom values are supplied through the idVendor and idProduct kernel module parameters.
Signed-off-by Jef Driesen<[email protected]>So this patch resolves the bug found in
1ab83238740ff1e1773d5c13ecac43c60cf4aec4which showed up in.35-rc1,
Quoted 1 line
right?
Yes, although I'm really sure it is the best way to fix the problem. The way I understand this code is that before that commit, the idVendor/idProduct/bcdDevice module parameters where set after the
bind(). Thus whatever was set as the default there got replaced with the values of the module parameters. Exactly what I would consider the correct behavior. After the commit, they get set beforebind(), where they are changed back to the hardcoded values, which I think is wrong. My patch sets them back to the right values, but maybe it makes more sense to not set the default values in the first place (if there are already values in place of course). But I didn't knew how to accomplish that.There might be similar problems for the other gadget drivers as well. I haven't checked that.
Quoted 23 lines
Quoted 23 lines
--- drivers/usb/gadget/serial.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)(quoted diff) +0
-0
b/drivers/usb/gadget/serial.cindex f46a609..77b410e 100644drivers/usb/gadget/serial.c +5
-0@@ -271,6 +271,11 @@ static int __init init(void) } strings_dev[STRING_DESCRIPTION_IDX ].s = serial_config_driver.label; +if (idVendor) + device_desc.idVendor = idVendor; +if (idProduct) + device_desc.idProduct = idProduct; +return usb_composite_register (&gserial_driver); }
module_init(init);
--
1.7.1
Quoted 66 lines · Robert Lukassen
Hi,
I just revisited the patch I submitted and I can see that it needs fixing. The intention of the patch was to provide the idVendor & idProduct kernel module parameter overrides to the individual functions at '
bind()' time. Prior to the patch, the overrides were done after the bind, making it hard for individual functions to determine the correct value for idVendor (some functions may need to use that value, e.g. USB audio when it registers itself as an ALSA device; it would want to use the same Vendor id).The patch makes sure that that happens, however, right after the
bind()the patched values are lost due to the copying of the gadget specific device descriptor. Here's the snippet from 2.6.34:999
usb_gadget_set_selfpowered(gadget);
10001001 /* interface and string IDs start at zero via kzalloc.
1002 * we force endpoints to start unassigned; few controller 1003 * drivers will zero ep->driver_data. 1004 */ 1005 usb_ep_autoconfig_reset(cdev->gadget); 1006 1007 /* composite gadget needs to assign strings for whole device (like 1008 * serial number), register function drivers, potentially update 1009 * power state and consumption, etc 1010 */1011 status =
composite->bind(cdev);
1012 if (status < 0)
1013 goto fail;
1014
1015cdev->desc=*composite->dev;
1016cdev->desc.bMaxPacketSize0=gadget->ep0->maxpacket;
1017
1018 /* standardized runtime overrides for device ID data */
1019 if (idVendor)
1020cdev->desc.idVendor=cpu_to_le16(idVendor);
1021 if (idProduct)
1022cdev->desc.idProduct=cpu_to_le16(idProduct);
1023 if (bcdDevice)
1024cdev->desc.bcdDevice=cpu_to_le16(bcdDevice);
1025In line 1015, the composite device descriptor is copied to the
cdev->descfield. Then the values get patched.My patch just moved lines 1018-1024, so that the functions could access the patched values. The ill side effect is that these patched values are lost when the
*composite->dev(== device descriptor) is copied in line 1015.It would seem that the patch should also have moved lines 1015-1016 in front of the
composite->bind(cdev)call.It would require all composite gadgets (such as
serial.c) and all functions (such asf_acm.c) to do any modifications to the device descriptor as passed to them in the 'bind' call. For functions that is natural, as they should be unaware of the gadget that uses them.The composite gadgets such as 'serial' seem to deal with it differently. The
serial.cgadget refers to the device descriptor as 'device_desc', and it is a static struct. It references it in its 'init' function (which is ok, it is prior to the registration point) and in thegs_bind()call. At that point it should probably not be using 'device_desc', butcdev->desc.
Quoted 8 lines
I think we can go one of two ways. I'd be happy to go over the composite gadgets and change their use of their device descriptors, such that they use
cdev->descatbind()time. Combining that with the moving the copying of the*composite->devto before calling 'composite->bind()' would make things consistent.The other way is reverting my original patch. For those functions that need access to the overridden idVendor/idProduct code, we'll need to work out another (generic) solution.
So, do you want me to revert your original patch and wait for you to come up with a "better" solution?
That seems like the correct thing to do at the moment.
thanks,
greg k-h
Quoted 72 lines · Greg KH
Quoted 71 lines · Robert Lukassen
Hi,
I just revisited the patch I submitted and I can see that it needs fixing. The intention of the patch was to provide the idVendor& idProduct kernel module parameter overrides to the individual functions at '
bind()' time. Prior to the patch, the overrides were done after the bind, making it hard for individual functions to determine the correct value for idVendor (some functions may need to use that value, e.g. USB audio when it registers itself as an ALSA device; it would want to use the same Vendor id).The patch makes sure that that happens, however, right after the
bind()the patched values are lost due to the copying of the gadget specific device descriptor. Here's the snippet from 2.6.34:999
usb_gadget_set_selfpowered(gadget);
10001001 /* interface and string IDs start at zero via kzalloc.
1002 * we force endpoints to start unassigned; few controller 1003 * drivers will zero ep->driver_data. 1004 */ 1005 usb_ep_autoconfig_reset(cdev->gadget); 1006 1007 /* composite gadget needs to assign strings for whole device (like 1008 * serial number), register function drivers, potentially update 1009 * power state and consumption, etc 1010 */1011 status =
composite->bind(cdev);
1012 if (status< 0)
1013 goto fail;
1014
1015cdev->desc=*composite->dev;
1016cdev->desc.bMaxPacketSize0=gadget->ep0->maxpacket;
1017
1018 /* standardized runtime overrides for device ID data */
1019 if (idVendor)
1020cdev->desc.idVendor=cpu_to_le16(idVendor);
1021 if (idProduct)
1022cdev->desc.idProduct=cpu_to_le16(idProduct);
1023 if (bcdDevice)
1024cdev->desc.bcdDevice=cpu_to_le16(bcdDevice);
1025In line 1015, the composite device descriptor is copied to the
cdev->descfield. Then the values get patched.My patch just moved lines 1018-1024, so that the functions could access the patched values. The ill side effect is that these patched values are lost when the
*composite->dev(== device descriptor) is copied in line 1015.It would seem that the patch should also have moved lines 1015-1016 in front of the
composite->bind(cdev)call.It would require all composite gadgets (such as
serial.c) and all functions (such asf_acm.c) to do any modifications to the device descriptor as passed to them in the 'bind' call. For functions that is natural, as they should be unaware of the gadget that uses them.The composite gadgets such as 'serial' seem to deal with it differently. The
serial.cgadget refers to the device descriptor as 'device_desc', and it is a static struct. It references it in its 'init' function (which is ok, it is prior to the registration point) and in thegs_bind()call. At that point it should probably not be using 'device_desc', butcdev->desc.I think we can go one of two ways. I'd be happy to go over the composite gadgets and change their use of their device descriptors, such that they use
cdev->descatbind()time. Combining that with the moving the copying of the*composite->devto before calling 'composite->bind()' would make things consistent.
Quoted 8 lines
Quoted 3 lines
The other way is reverting my original patch. For those functions that need access to the overridden idVendor/idProduct code, we'll need to work out another (generic) solution.
So, do you want me to revert your original patch and wait for you to come up with a "better" solution?
That seems like the correct thing to do at the moment.
If the original commit is reverted, the idVendor and idProduct module parameters can still be accessed through the global variables directly (like I did in my own pathc). Since access to those values appears to be the main goal of the patch, I think no functionality will be lost by reverting the commit.
Hi,
Yes, providing access to those module parameters was the original goal. I agree that my patch should be reverted and I'll try to come up with a method of accessing these values without violating the information hiding principles too much. I don't like accessing globals.
Robert
Quoted 105 lines
-----Original Message-----
From: Jef Driesen [mailto:[email protected]]
Sent: Friday, December 03, 2010 11:10 PM
To: Greg KH
Cc: Robert Lukassen; David Brownell; Greg Kroah-Hartman; [email protected]; [email protected]
Subject: Re: [PATCH] USB:g_serial: Allow to override the default VID/PIDQuoted 9 lines · Greg KH
Quoted 8 lines · Robert Lukassen
Hi,
I just revisited the patch I submitted and I can see that it needs fixing. The intention of the patch was to provide the idVendor& idProduct kernel module parameter overrides to the individual functions at '
bind()' time. Prior to the patch, the overrides were done after the bind, making it hard for individual functions to determine the correct value for idVendor (some functionsmay need to
Quoted 5 lines
Quoted 5 lines
use that value, e.g. USB audio when it registers itself as an ALSA device; it would want to use the same Vendor id).
The patch makes sure that that happens, however, right after the
bind()the patched values are lost due to the copying ofthe gadget
Quoted 7 lines
Quoted 7 lines
specific device descriptor. Here's the snippet from 2.6.34:
999
usb_gadget_set_selfpowered(gadget);
10001001 /* interface and string IDs start at zero via kzalloc.
1002 * we force endpoints to start unassigned; fewcontroller
Quoted 5 lines
Quoted 5 lines
1003 * drivers will zero
ep->driver_data.
1004 */
1005usb_ep_autoconfig_reset(cdev->gadget);
1006
1007 /* composite gadget needs to assign stringsfor whole device (like
Quoted 1 line
Quoted 1 line
1008 * serial number), register function drivers,
potentially update
Quoted 18 lines
Quoted 18 lines
1009 * power state and consumption, etc
1010 */
1011 status =composite->bind(cdev);
1012 if (status< 0)
1013 goto fail;
1014
1015cdev->desc=*composite->dev;
1016cdev->desc.bMaxPacketSize0=gadget->ep0->maxpacket;
1017
1018 /* standardized runtime overrides for device ID data */
1019 if (idVendor)
1020cdev->desc.idVendor=cpu_to_le16(idVendor);
1021 if (idProduct)
1022cdev->desc.idProduct=cpu_to_le16(idProduct);
1023 if (bcdDevice)
1024cdev->desc.bcdDevice=cpu_to_le16(bcdDevice);
1025Quoted 5 lines
Quoted 5 lines
In line 1015, the composite device descriptor is copied to the
cdev->descfield. Then the values get patched.My patch just moved lines 1018-1024, so that the functions could access the patched values. The ill side effect is that
these patched
Quoted 4 lines
Quoted 4 lines
values are lost when the
*composite->dev(== device descriptor) is copied in line 1015.It would seem that the patch should also have moved lines
1015-1016
Quoted 5 lines
Quoted 5 lines
in front of the
composite->bind(cdev)call.It would require all composite gadgets (such as
serial.c) and all functions (such asf_acm.c) to do any modifications to the device descriptor as passed to them in the 'bind' call. Forfunctions that
Quoted 3 lines
Quoted 3 lines
is natural, as they should be unaware of the gadget that uses them.
The composite gadgets such as 'serial' seem to deal with
it differently.
Quoted 1 line
Quoted 1 line
The
serial.cgadget refers to the device descriptor as'
device_desc',Quoted 3 lines
Quoted 3 lines
and it is a static struct. It references it in its 'init' function (which is ok, it is prior to the registration point) and in the
gs_bind()call. At that point it should probably not beusing '
device_desc', butcdev->desc.Quoted 3 lines
Quoted 3 lines
I think we can go one of two ways. I'd be happy to go over the composite gadgets and change their use of their device
descriptors,
Quoted 3 lines
Quoted 3 lines
such that they use
cdev->descatbind()time. Combining that with the moving the copying of the*composite->devto before calling 'composite->bind()'would make things consistent.
Quoted 7 lines
Quoted 5 lines
The other way is reverting my original patch. For those functions that need access to the overridden idVendor/idProduct code, we'll need to work out another
(generic) solution.So, do you want me to revert your original patch and wait
for you to
Quoted 2 lines
come up with a "better" solution?
Quoted 8 lines
Quoted 1 line
That seems like the correct thing to do at the moment.
If the original commit is reverted, the idVendor and idProduct module parameters can still be accessed through the global variables directly (like I did in my own pathc). Since access to those values appears to be the main goal of the patch, I think no functionality will be lost by reverting the commit.
This e-mail message contains information which is confidential and may be privileged. It is intended for use by the addressee only. If you are not the intended addressee, we request that you notify the sender immediately and delete or destroy this e-mail message and any attachment(s), without copying, saving, forwarding, disclosing or using its contents in any other way. TomTom N.V., TomTom International BV or any other company belonging to the TomTom group of companies will not be liable for damage relating to the communication by e-mail of data, documents or any other information.
Quoted 4 lines · Robert Lukassen
Yes, providing access to those module parameters was the original goal. I agree that my patch should be reverted and I'll try to come up with a method of accessing these values without violating the information hiding principles too much. I don't like accessing globals.
Do I have to take any action to make sure the original commit [1] gets reverted?
[1] 1ab83238740ff1e1773d5c13ecac43c60cf4aec4
Quoted 9 lines · Jef Driesen
Quoted 4 lines · Robert Lukassen
Yes, providing access to those module parameters was the original goal. I agree that my patch should be reverted and I'll try to come up with a method of accessing these values without violating the information hiding principles too much. I don't like accessing globals.
Do I have to take any action to make sure the original commit [1] gets reverted?
[1]
1ab83238740ff1e1773d5c13ecac43c60cf4aec4
It's now reverted.
thanks,
greg k-h