RS485 documentation: add 16C950 UART description
Subsystems (2)
PATCH 1/1 RS485 documentation: add 16C950 UART description
Add a notion about 16C950 UART, that is using DTR signal for RS485 mode.
Signed-off-by Yegor Yefremov <[email protected]>
Documentation/serial/serial-rs485.txt +5 -4
@@ -11,10 +11,11 @@ 2. HARDWARE-RELATED CONSIDERATIONS - Some CPUs (e.g., Atmel AT91) contain a built-in half-duplex mode capable of - automatically controlling line direction by toggling RTS. That can used to - control external half-duplex hardware like an RS485 transceiver or any - RS232-connected half-duplex device like some modems. + Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in + half-duplex mode capable of automatically controlling line direction by + toggling RTS or DTR signals. That can be used to control external + half-duplex hardware like an RS485 transceiver or any RS232-connected + half-duplex devices like some modems. For these microcontrollers, the Linux driver should be made capable of working in both modes, and proper ioctls (see later) should be made