Skip to contentSkip to conversation

viafb: I2C/DDC LCD detection for VIA framebuffer

PATCH Superseded Dzianis Kahanovich 2 participants 3 messages Nov 22, 2010 Framebuffer layer

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 viafb: I2C/DDC LCD detection for VIA framebuffer

I2C/DDC LCD detection for VIA framebuffer

Adding legacy I2C/DDC support for VIA framebuffer, used to fix LCD panel size and (if "via_active_dev" is empty default) force LCD detection. This solving at least defaults on Chrome9 video on HP mini 2133 notebook, but must be good in other cases, include double-LCD. Also forcing viafb_active_dev to NULL as bugfix.

---

drivers/video/via/via-core.c +54 -0
diff -pruN a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
@@ -2,6 +2,7 @@
  * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
  * Copyright 2009 Jonathan Corbet <[email protected]>
+ * Copyright 2010 Dzianis Kahanovich <[email protected]>
  */
 
 /*
@@ -16,6 +17,8 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
+extern char *viafb_active_dev;
+
 /*
  * The default port config.
  */
@@ -576,6 +579,56 @@ static void via_teardown_subdevs(void)
 }
 
+static void via_i2c_detect(void)
+{
+	const u8 *edid;
+	struct fb_var_screeninfo var;
+	int i, n = 0;
+	struct i2c_adapter *adapter;
+
+	for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+		adapter = viafb_find_i2c_adapter(i);
+		if (!adapter || !adapter->algo_data ||
+		    !(edid = fb_ddc_read(adapter)))
+			continue;
+		if (fb_parse_edid(edid, &var))
+			goto free_edid;
+		if (n) {
+			fb_edid_to_monspecs(edid, &viafbinfo1->monspecs);
+			viaparinfo->lvds_setting_info2->lcd_panel_hres =
+			    var.xres;
+			viaparinfo->lvds_setting_info2->lcd_panel_vres =
+			    var.yres;
+			if (!viafb_active_dev) {
+				viafb_SAMM_ON = STATE_ON;
+				if (viafbinfo1->monspecs.input & FB_DISP_DDI)
+					viafb_LCD2_ON = STATE_ON;
+			}
+		} else {
+			fb_edid_to_monspecs(edid, &viafbinfo->monspecs);
+			viaparinfo->lvds_setting_info->lcd_panel_hres =
+			    var.xres;
+			viaparinfo->lvds_setting_info->lcd_panel_vres =
+			    var.yres;
+			if (!viafb_active_dev) {
+				viafb_DVI_ON =
+				    viaparinfo->tmds_setting_info->
+				    max_hres ? STATE_ON : STATE_OFF;
+				if (viafbinfo->monspecs.input & FB_DISP_DDI) {
+					viafb_DeviceStatus = LCD_Device;
+					viafb_primary_dev = LCD_Device;
+					viafb_LCD_ON = STATE_ON;
+				}
+			}
+		}
+		n++;
+free_edid:
+		kfree(edid);
+		if (n > 1)
+			break;
+	}
+}
+
 
 static int __devinit via_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
@@ -607,6 +660,7 @@ static int __devinit via_pci_probe(struc
 	ret = via_fb_pci_probe(&global_dev);
 	if (ret)
 		goto out_subdevs;
+	via_i2c_detect();
 	return 0;
 
 out_subdevs:
drivers/video/via/viafbdev.c +1 -1
diff -pruN a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
@@ -43,7 +43,7 @@ static int viafb_second_size;
 static int viafb_accel = 1;
 
 /* Added for specifying active devices.*/
-char *viafb_active_dev;
+char *viafb_active_dev = NULL;
 
 /*Added for specify lcd output port*/
 char *viafb_lcd_port = "";

--

Signature · 1 line
WBR, Dzianis Kahanovich AKA Denis Kaganovich, http://mahatma.bspu.unibel.by/
#1 lore raw

drivers/video/via/via-core.c static void via_teardown_subdevs(void) · line 583

Quoted 3 lines · Dzianis Kahanovich
drivers/video/via/via-core.c +3 -0
+static void via_i2c_detect(void)
+{
+	const u8 *edid;
        ^^^^^

drivers/video/via/via-core.c static void via_teardown_subdevs(void) · line 625

Quoted 2 lines
drivers/video/via/via-core.c +2 -0
+free_edid:
+		kfree(edid);
                ^^^^^^^^^^^

That probably shouldn't be const.

drivers/video/via/via-core.c static void via_teardown_subdevs(void) · line 630

Quoted 6 lines
drivers/video/via/via-core.c +5 -0
+		if (n > 1)
+			break;
+	}
+}
+

regards,
dan carpenter

#2 lore raw

Sorry for mistake. I sure to remove "const" but revert to older code later. I repost fixed patch ("v2") to avoid formal problems. Sorry.

Quoted 23 lines · Dan Carpenter

drivers/video/via/via-core.c static void via_teardown_subdevs(void) · line 583

Quoted 3 lines · Dzianis Kahanovich
drivers/video/via/via-core.c +3 -0
+static void via_i2c_detect(void)
+{
+	const u8 *edid;
        ^^^^^

drivers/video/via/via-core.c static void via_teardown_subdevs(void) · line 625

Quoted 2 lines
drivers/video/via/via-core.c +2 -0
+free_edid:
+		kfree(edid);
                ^^^^^^^^^^^

That probably shouldn't be const.

drivers/video/via/via-core.c static void via_teardown_subdevs(void) · line 630

Quoted 6 lines
drivers/video/via/via-core.c +5 -0
+		if (n > 1)
+			break;
+	}
+}
+

regards,
dan carpenter

Signature · 1 line
WBR, Dzianis Kahanovich AKA Denis Kaganovich, http://mahatma.bspu.unibel.by/