hwmon init
Hello,
Is there a reason why the dtt sensors are initialized and accessed on u-boot startup?
The U-Boot Design Principles[1] clearly say:
Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS).
Should that be changed?
bye,
Heiko
[1] http://www.denx.de/wiki/U-Boot/DesignPrinciples
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hello Heiko,
Quoted 2 lines
Is there a reason why the dtt sensors are initialized and accessed on u-boot startup?
Historical reasons?
Quoted 11 lines
The U-Boot Design Principles[1] clearly say:
Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS).
Should that be changed?
Yes indeed, the current situation is not consistent with the design principles and thus should be changed. Patches welcome!
Best wishes
Detlev
Signature · 9 lines
LISP is the most powerful programming language, and if you want an inter- preter, LISP is the best. None of the other languages come anywhere near LISP in their power. The most exciting things about LISP are read, eval, and print. If you look at other languages, they have no equivalent for any of those. -- Richard Stallman -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
Dear Heiko Schocher,
Quoted 3 lines · In message <[email protected]> you wrote:
Is there a reason why the dtt sensors are initialized and accessed on u-boot startup?
Someone once thought it was a good idea, and nobody fixed it since.
Quoted 1 line
Should that be changed?
Yes.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de All your people must learn before you can reach for the stars. -- Kirk, "The Gamesters of Triskelion", stardate 3259.2
Hello Wolfgang,
Quoted 11 lines · Wolfgang Denk
Dear Heiko Schocher,
Quoted 2 lines · In message <[email protected]> you wrote:
Is there a reason why the dtt sensors are initialized and accessed on u-boot startup?
Someone once thought it was a good idea, and nobody fixed it since.
Quoted 1 line
Should that be changed?
Yes.
Ok, I prepare a patch.
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany